 Hey everyone, Shaber1000 here. Today, we got a couple parts for this thing. We're gonna clean it up, make it look nice for the gentlemen, and we'll ship it back up to his house. But, we got something we gotta do first, on this thing. Ha ha. I'll tell you about that here in just a second. Cue the intro. Hey guys, here's the old cable, as you can see what happens when you try to free him up sometimes. Now this, see the end of this? This has got this end, which came around, and hooked on to there, where this bolt is. Now the new one, they sent me, is pretty much like the one I have, but it's got this little donkidoo in there. Now what this, it'll fit, and this'll go into this hole right here, and it just snaps on, but that's where the choke cable goes. That's okay, because when you put the choke, you can put your choke cable anywhere you want. So I'm just gonna put the choke cable back where it was, right about there, maybe, or up here, probably right about there, right below that. So I'm gonna put you in the stand. Again, sorry about the lighting, but I'm trying to stay out of the sun. And, monkey noticed it was made in Canada. It's got the maple leaf down there. You know, for those of you who don't know, she's originally from Canada. All right, so. Yeah, you can put a choke cable anywhere you want. Like I said, the choke cable's a little iffy, but it's freed up, and I got it lubed down real good, so I don't foresee him having another problem with that for, you know, at least another year. So, all right, let's get you in the stand, and figure out where we're gonna put our hole. First thing we're gonna do is we're gonna hook this up, make sure this is gonna work. Then, then we'll drill a hole if we have to, put our choke cable. All right, guys? Okay, so here we go. Let's see, I'm gonna run this. I don't know if I wanna go over and under with that, but anyway, we're just gonna put this down in here. We're gonna bring this out. I'm just gonna put that in there just like that. There we go. All right, now let's go up here and I'll show you what we're gonna do up here. Okay, guys, so now what we're gonna do is we're gonna bring this up here, and this is gonna go inside that hole. It's gotta go into this handle. Hopefully, this is not, it's too long, I have to move this down here. I may just do that, but first, let's check. Okay, so this is gonna go in this handle like that. Now, I'm just gonna hold this here and pull that. I don't think that's enough. So what we'll do is we'll drill a hole for this and put this down here. That way, we know, you know what I mean, where it's gotta be. So what I'm gonna do is I'm gonna go ahead and wire that open again, or wire the break off. That way, I'll know exactly where it's gotta be from there. So, pretty cool. All right, that way, I still only gotta drill one hole, but this can go back in its original position. It was like that. You can tell by the way the cable is, but I don't like running cables over top like that, so we're gonna probably put this right in here somewhere, run this through that, something like that. Okay, so let me get this break released. That way, I know where we gotta go. All right, so I got my mark where I need to be. It's gonna be right there. Now, so this is probably gonna have to go on the outside. So if it goes on the inside, it's gonna interfere with that. So I'm gonna, if I have to, I can move this too. It's not a big deal, so it kinda looks better up there anyway, so let me get my drill bit and I'm gonna punch a hole through there and I'll be back with you. Okay guys, so I had to drill a hole and put this one in here. Now this one, I had to drill another hole for and I'm gonna put it right up here and I'm gonna run this cable right through there like that. There we go. I'm gonna tighten her down. I don't see, I wanna run this cable underneath that bar. There we go. Just like this. Now we're gonna tighten her down. This bolt's coming out here it's not gonna be in use anymore. Then we'll start it up, make sure everything's still good on that end. Okay, so, all right. Now, let's back you up here and make sure that everything's up to par. Pull the handle, choke it, let's start it. I'll probably put a wire tie right here just to, so you know, it kinda tighties it up. Put it like that. Let me grab a zip tie. Cleans everything up a little nicer. Put that down like that so you don't catch your leg on it. There, that's done. Now, let's move back up here to the front. Okay guys, again, sorry for the lighting but I did bring out my stand light over there and it just made no difference absolutely at all. Do you guys remember, I can't see them on the wrong side of the camera. I'm sure you guys remember this. This is what we took out. You probably remember what it looked like inside. Okay, see that's, okay, here we go. One of them big palmetto bugs. See that? You know what was in there? Those are lizards that have hatched. Yeah, it had eggs in there. So, let's go ahead and take this off of here. We're gonna put our filter in, okay? There's our filter. See the difference? Yeah, big difference. Now, if that people ask me how you know which side this pre-filter goes on, you know? Well, remember that, it's a pre-filter so that means it filters before this filter. So that means as air is coming in, this should be the first thing it hits and this will be the last thing. So this is gonna go in here like this, right? But since air is coming in there, your pre-filter is gonna go here. This is gonna go here. Yes, kind of a pain. But then, this is gonna just clip in here. You can put it inside of here if it's easier for you, which apparently it's gonna be for this, okay? Got our pre-filter, we got our filter and then that's just gonna screw on. It's gonna be really snug and tight. That's why this bolt's so long. But you want it that way so no dirty air gets into it. There we go. And that's that. Always so many cigarettes like that. Sweat hits it, puts it out. All right, there. Now what we're gonna do is I'm gonna clean it up. Just gonna use some of this old stuff, just any kind of lubricant. Like WD-40 works really great on this stuff. You wipe it down. Automatic transmission fluid works really well too. Then you just wipe it down. I'll see if I have any. And as you can see, really does a nice job cleaning it up. Let me see if I got some automatic transmission fluid because we're done with this. I'm just gonna clean it up for him a little extra. He pays me a little extra so I wanna do a little extra for him. You know, we'll get this all brushed out of here. We'll wipe the deck down. Not gonna worry about the tires, but yeah. And then I'll bring you back and we'll show you what it looks like as we're cleaning it. Okay guys, just real quick, I'll show you this. I found some transmission fluid. Put some transmission fluid on a rag. Take that, put it on there and wipe it off. Look at the difference. And once that dries, it looks amazing. Then up here on top, show you a little bit right here. Oops, get some of the transmission fluid on. There we go. There you go. It'll stay like that for a long time. And you gotta see that for a long time. Yep. So I'm gonna do that this whole thing. I'm gonna brush this dirt out. I'm not gonna spend a lot of time on it, but you know, remember, you don't pay your bills. Your boss don't pay your bills. Your customers do. Whether you own a business or whether you work for someone, your customer pays your bills. So when your customer treats you good, you treat them good. Give them a little extra. It doesn't hurt. You know, this ain't gonna cost, this ain't costing me no money. You know what I mean? Just stuff I got sitting around and, you know, and they'll come back to you. All right, so that's what I'm gonna do. And I'll bring you back when this thing's looking all pretty. We'll see the difference. We'll give you a little before shot. And there's after. Missed a spot right in there in that line. It's not perfect, but the motor's not perfect. And it'll look like that until you get it dirty. But next time you don't have to do all that, this took about five minutes. Next time you just wipe it off and all that dirt will come off and it'll look just like that again. Remember, this used to have a cover on it. Well, it was fancy looking covers. So there you go. This thing's ready to go. And I'm gonna start it up again because I don't want it to get dirty again. Ha ha. I'm gonna take it up to it and drop it off here after a bit. There we go. It looks like brand spanking. I'll be right back, guys. Okay, guys, so there you go. Just a little bit of this net. The motor's gone. Monkey, push it up there for me. Oh, she's pulling it. Cause if you guys remember the way that guy walks, he sure didn't need to be, he don't need to be pushing that thing up down the street. He's got a pickup truck like I said, but I figure he just gonna lift it up in the truck. So he pushed it down here. So like I said, he pays a little extra. He gets a little extra, you know? So this week, I'm not gonna have a whole lot of videos. I may get one up here and there. I'm gonna spend all week, all this week, trying to get my garage cleaned out. But the eighth, we gotta go to Tampa. So that's cool. Well, she's gotta see a doctor, but so maybe I'll try to find some, place where I can get you some drone footage or something. We'll film that. Yeah, and then, but yeah, this week, I'm gonna try to get this garage all cleaned out and that way, cause there's a lot of little projects I wanna get into that I can't because my work bench is so full. I mean, I can't even walk in that garage, but you guys remember it used to be nice and clean, but you know, after dad passed away, you know, I fit pretty much everything he had in that two and a half car garage in our little one car garage. I mean, and that's all it is. The sea bring or convertible would fit in there just barely and you could barely get out the doors. The Toyota would fit in there same way. You barely close the garage door. In fact, sometimes you would have to come outside, close the garage door, come outside and open the garage door because that's how close it was in there. So it's not, that's really all it is is one car. It's not one and a half car. Like there's no room for a man door, you know, to walk in there except for, you know, from the kitchen. So I got to get that cleaned out, man. It's been bothering me. And then after I do that, then I can get my, then I can get my blast cabinet set up and we can do some blasting and stuff. So I got a lot of projects. I'm not going to take on any more projects until I get these done. You know, like I got my tractor. Here comes monkey. I got my tractor, you know, I got some stuff to work on. I got a, you know, I still got a lot of little things to do on the Corvette. I got the truck needs to be done. And you know, all my other little projects, there's monkey there. You can hear her flip flopping from a block away. Hi. Let's walk past. Don't say nothing. Thank you. I was like, well, we'll just put it in there. She's like, no, that way we don't have to lift it. I think walking up there and back was more than just lifting it up and taking it down. Yeah, it is, it is guys, trust me. Listen to the mechanic that's lifted a lot of things. One, two, done. One, one, two, done. Yeah. Yeah, same with that. One, two, done. You would have had to lift it, not go for your heart. You would have had to lift it back up, not go for your heart. No, done. No, I was just going to leave it open and then have you back up real fast and stop real fast. And it would have rolled out into a garden and there it would have been for him. He'll be happy because that grass is long. Yeah, I know. It's a little too long for that lawnmower. I don't know. It's a good little lawnmower, but I know why. Why? Because it's from Canada. That's Canadian sticker on it. I told you, I mentioned that earlier in the beginning of my video, it's like she noticed that sticker. Yep. Well, I'll get ahold of him in time. It's up there enough. I put it right by the door. If he needs me to, I can run the John Deere up and give him my first cut. I don't know if we can because it's really a small lot and it's stuff on the grass. So I'd be afraid of running over something. There's stuff everywhere. It's not a big deal. You just walk it first. He's got a little path and it goes right to the vehicle to the doorway. That's it. Yeah, everything's long. But he's got a beautiful yard though. Yeah, it's nice and green. Yeah, he's got, well, yeah. And he's got flowers and plants around him. He used to have it really pretty when I first moved here. But I think he's getting older and it's harder for him. Oh, he's all the way walks. Yeah, yeah. So, you know, he paid us a little extra so we give him a little extra, huh? Yeah, why not? He's our neighbor. Yeah, yeah. He gave you some work. He didn't have to. He could have took it down to the lawn people that charge boo-koo. Yeah. But he's like, I, we are, you know, help your neighbor out a little bit. Oh, yeah. Yeah, it's like over here, I'm mowing more and more of their grass for them. But now we're gonna have two empty houses. But, but, you know, that's okay. Cause when I first moved in here with her, he was out there mowing, cause it used to be whenever he'd hear my mower start up or her mower or whatever. He heard me start the mower up. He'd come out and mow too. And one day we stopped here. We met and we stopped and we was talking. I says, how far over do I mow? Because I said, I don't know. That's the first time I ever mowed this. He said, as far as you want. He says, yeah. He says, I don't care. He says, it doesn't matter. He said, we're neighbors. Yeah. Yeah, they've always been good. They said, I can use their little piece of property there if I need to take my truck back there or something. They're fine with it. Yeah, they say if we ever need to drive the truck around back or whatever, it's fine. And I try not to overstep that, you know? Yeah. But once in a while we have to. Well, they said if we ever wanted to set a table up in the shade or something back there that we're welcome to. Yeah. Because they got a lot of shade trees there. All right, guys, so I'm going to go for now. Like I said this week, I'll have a couple videos, but I'm going to concentrate on that garage all week. So it's hot again today. I can only work like five minutes. I got to take a 10 minute break. Yeah. Not like it used to be. Man, at work I would do this 100 degrees all day long out in the sun. I had no shade there. Did I? No, it was horrible. Well, we had that car. We had that awning, that car awning, that I could put some stuff under. But a lot of them trailers were too tall to fit under there. Yeah. We had to flatten the tires or take the tires off and set it down on a jack and roll it in. And it wasn't worth it, you notice? I just worked out in it and then in them hot trailers. And had one big fan. One big fan. It was a misting fan. And that was all right for a while. But then I started rusting my tools up. I don't get the misting fans that are up in the ceiling. You could have put them up there. Yeah, but it would have been nicer for you all. Yeah, it was nice. But it rusted the tools up. So you can't have it all. Well, yeah, but you can't work with rusty tools. But then you got pneumonia because you went inside and you would get parts that was fully air-conditioned and come back out in the heat. And that's how you got them on. Yeah, because the parts room was inside. Because I had really no shop, much to work of. So all the parts stuff was inside. And they kept it cool in there, of course. And so I would go in and out, in and out 100 degrees and then go into 68 degrees and then back out. It's not good for you. Yeah. You can't do that in Florida. You'll get pneumonia real quick. Yeah, yeah. All right, guys. So she bears them at the main ledge. I'm gone for now, Monk. I can see she's out for now, y'all. Thanks again, Monk. I appreciate it. Bye. Bye, guys. We'll see you in the next one. I want some soup. Maybe I will make another video. Is that the soup you're talking about? Yeah. All right, stay tuned for a soup video. Bye, guys.