 okay guys so this fireplace we put a fuse in it last year but what it's doing now is when we turn it on turn the fire on knowing I know what it is easy to fix but I should have did this other oh she moved some things for me thank you I should have did it the other day even mentioned it when I put the TV up hey I'm gonna pull this out I'm gonna take this out and we'll set that table up right here and we're gonna go ahead and fix that stick around guys I'm just gonna set this down like this we'll take these screws out of the back it's dusty but it's been in you know the fireplace cabinet all year I'll wipe that off before I put it back together so let me bring you over here a little bit so you can see better of what's going on there you go let's take these screws out around here really short screws probably didn't need to this is probably ever killed so I got the transfer case ordered for the truck it'll be here by the 5th probably taking a couple days to do it there's nothing to them I mean for the price you pay for these these things there's the fire that's what makes your fire these things spin and there's lights down here that shine up and this is your background looks like a looks like a fire in there and then as these spin that's what makes it look like there's flames I think I had to replace one of these bulbs last year I had it apart but this is what is making all that racket so we're going to put it up here and turn it on there's a grommet in here they wear out they make a lot of racket it could be the motor making the noise but let me get it plugged in and we'll turn this thing on I don't need to turn the heater on because it's working fine and we'll see if it's the motor or if it's right here usually they're right here but let's just take it apart or let's plug it in and find out for sure all right so I brought you in a little closer let's turn it on now there is a bulb out I don't think I've got any more than bulbs okay so it's the motor itself so we we're going to take the motor off it's right here at the side over there and we're going to put a little oil in it and see if we get fixed yeah I don't have a bulb for that thought I put one in the last year I might not have on a screw where's the other one right there it looks like bring this up here it's just a little cotter pin two screws holding motor I got taper I I mean they use scotch tape from the factory guys all right let me get a pair of pliers we're going to take this cotter pin out of here pull this motor off I don't know if it'll come apart but we'll see what we can do to get some oil down in there okay see if I did something like that people be like ah that's a heater you know you can't be using scotch tape on that well I agree not that just because it's a heater just because it's kind of tacky I mean you know just straightening that cutter pin out take the motor out of here same size screws they probably built this thing for around five ten bucks maybe so for how much yeah I see a lot of gunk there now I don't want to take this part if I don't have to they're not hard to all right well shoot let me get something to wipe that off with all right there's just some tabs been over there so I think we can take this off okay have to get a pair of pliers I mean a screwdriver to get those yeah I'm gonna have to get a screwdriver probably unless these can get under there let me get a screwdriver I was going to take this out but the other end of this is crimped in that I don't want to crimp all them wires just for this one thing so this one I could probably get by with with dribbling some oil down in there I think I'm gonna try that first and I forgot my oil too first let's put some alcohol on there can use alcohol because it does evaporate pretty quick this is only 50% I need to get I need to keep 99 or 100 anyway around try to spin that but let's just pour a little bit on there it should seep down in there and like I said it will evaporate so well that's doing its thing I'm gonna go get some some oil okay so it doesn't seem to want to be going down in there so what I'm gonna try to do first I got some WD-40 it's a little thinner maybe that'll soak down in there then I can put a little bit heavier stuff on let's go ahead and let's turn that on I may have to mess around and try to get that back off there I really don't want to do that so what I'm gonna do is I'm just gonna let this run for a little bit sounds like it's getting quieter I'm gonna let it run and see if it'll work that work itself down in there then we'll put some heavier oil in it it's already getting quieter all right I'm gonna let it run and keep spraying some oil on there and on there okay guys so it's been running oh I don't know a minute and half I got that other that middle light working over there now WD-40s all right but I like to put a little bit thicker stuff so it stays on longer all right now I'm gonna let it run a little bit with this oil on it and then we'll put the motor back in and see if it sounds better all right so it's been running about 10 minutes now over here on the other side where this rod goes through this is what simulates all monkeys out here now this is what simulates the fire mama yeah so what I'm gonna do is on the other side I'm just gonna use a little bit of this 98 same stuff I had ordered for monkeys SUV 20 bucks not for this one this is stuff her dad had but I'll be using the rest of it because it takes 2.2 pints but anyway let me get around here let's get this back together I'll ship this off now so you're not being blinded by the light okay so and that's all from them lights alone Wow okay go ahead and put this back together here screws here if they started I can't see I look right in them damn lights should have grabbed a screwdriver all right let me grab a screwdriver take this up by hand by little torquey torque here over here that little rubber piece I'm just gonna put a dab of this 90 weight on right in there I'm gonna put our simulator back in there cotter pin bend this back over just like that now pretty confident that that's gonna be quite as a mouse now I don't want people say that because I've heard some mice make some horrendous sounds like really loud especially like if they're in their wall or something all right let's go ahead put this back on especially at mouse I heard the other night man that thing was noisy you should see the look monkey's giving me if looks you kill my hat would be on fire just kidding Monk but I have heard some horrendous sounding mice you know getting into stuff and I got so you get the idea I'm just gonna go ahead and put these 976 screws back in and then we'll flip it up and we'll check it out together okay here we go oh this bottom part I don't know if I should one last time I had it for it comes apart so you can change in bulbs easier all right what you think mama I don't have it turned on yet is it going to sound never mind okay guys there you go there it is there should be all right I'm gonna put it back in the fireplace this was given to me like five years ago yeah my boss gave it to me at a rental trailer and this was in it and he said you want to anything out of that trailer go get it I says that fireplace still in there he said yeah if you want to go get it anything in there that you want get it well I wanted that well not just this but the whole box the whole fireplace was in there all right hang tight so there it is guys pretty quiet now that almost couldn't hear me in my intro because I think it was so loud there it is nice all right guys thanks for watching appreciate it she bear the myth man legend gone for now we'll see you guys in the next one and stay tuned for some videos on the Chevy and we'll get that going I'll start on it I can start on it anytime but like I said the latest it should be here is the fifth so that'll give me a chance to get under there and start getting stuff unbolded so all right guys again thanks for watching appreciate it we'll see you soon bye bye and take care