 Ευχαριστούμε και ευχαριστούμε, είναι Vicky εδώ με ένα πολύ καλύτερο πρόγραμμα σήμερα. Θα κάνω κάποιες σχέσεις και θα σημαίνω ένα πολύ καλύτερο τεκνικό να χρησιμοποιήσεις your stencils or your oxides για να φτιάξεις πολύ καλύτερο πρόγραμμα. Τώρα έχω εδώ κάποιες νέες πρόγραμμα από την παράδειγμα της Τονικς Τούτιος. Αυτό είναι σχέσεις στους σχέσεις και they give you different glasses, all types of them. Έχω only 4 of them here and you get glasses for cocktails, for beer, for coffee, for tea, you even get a teapot which I don't have here. All of them include two dyes inside as well as five pouches that fit perfectly in the dyes to create your glasses. This is where you will put your shaker elements inside and you can fill them in with sequins, you can fill them with glitter, anything you like really because it is quite thick and it takes enough elements for them to shake inside even if they are not very thin or tiny. Now these pouches are curved at the top, I don't know if you can see that, they give that puffy look, they don't have any corners and hopefully you will be able to see that on the close-up photos when I will create the projects. So again every one of those packages come with two dyes and five pouches that match the dye and on the inside you will get this acetate, this is part of the packaging but I am going to hold on to it, I like to use these things, I recycle them and use them for my shaker cards. Of course you can use acetate for your windows when you use up all your pouches and of course there is the option to get refills of these pouches that match your dyes so they are available and I think on those refill packages you get 10 of the pouches for about five dollars. Now Tonic Studios has also came up with small sentiment stamp sets, these are 4x4, one of them is the tea and coffee and has everything to do with tea and coffee and the second one is celebration, again a 4x4 stamp set with lots of sentiments for birthdays, weddings, for congratulations and things like that so you can mix and match these sentiments with your shaker sets. Now I'm going to create 4 shaker cards using all the shaker sets that I have on hand and for that I'm going to create some fun backgrounds with my oxide inks and I'm starting with the first one, for this one I'm using squeezed lemonade, mustard seed and spiced marmalade. I'm applying it quickly over the background with my blending brush there and then I'm going to lay over a stencil, this is a confetti stencil from the latest release by Altenew and I'm going over it with my brush. So you can see the result now I'm going to show you a really fun technique, I'm going to place on top the stencil again and this time I'm going over the darker area of the background with my baby wipe. This way I can lift some of the color from the darker area and I end up with this cool look where you get darker confetti at the top and white confetti at the bottom. It is a really fun technique, quick and easy to do and you can use up your oxides and any stencil that you have at home. I will create 4 backgrounds with this technique so I'm going with another color combo and a different stencil and you can see that every time it ends up in beautiful results. This time I'm working with my blues, these are peacock feathers and tumbled glass. I'm not being very neat, I just want to have a basic color at the bottom and then I'm going to apply the stencil on top, go with the darker shade of blue towards the top and with the baby wipe I'm going to lift color from the bottom and here is the finished look. By the way the paper that I'm working on is by Arteza and I'm working on the drawing pad paper, you will find it linked down below. This is the paper that I'm using with my wax pencils and I find that the stress oxides blend beautifully on top of it and I can easily lift color with a baby wipe from that and you can see that whenever I lift color it goes back to being white. Now here I'm using another color combination, picked raspberry and spiced marmalade and notice that I'm using the same brush from one color to another, all you do is just wipe it off on a piece of paper towel and I had no problems at all. Now with this background instead of using a baby wipe to lift color I'm just using orange over pink and pink over orange. Just for a different look and of course we can go ahead and lift color if you like especially when you lift color from circles it is going to give a lovely poke look. For the last background for today I'm combining two colors, this is cracked pistachio and I will bring in squeezed lemonade. I am mixing the colors mainly at the center and now I'm going with cracked pistachio over lemon and I'm lifting with a baby wipe from the bottom corner and again here is a close up look where you can see how cool this background looks. Now I'm going to bring in the dyes from my shaker sets and I'm just going to try and decide which is going where. At this stage I'm trying to think of what color the beverage is going to be on the inside of the glass, this way I will try and mix and match the colors so that the content of the glass is going to stand out against the background. So now I'm going to place the dyes wherever I need them to go and always use the outside die just so you make sure that it is going to fit after you cut out the inside window. So I'm taping only the inside part and now I'm going to move on to the next one. Again I'm going to decide where I want this to go and tape down only the inside and that could be a pint glass for your beer or it can be a latte glass. Depends on how you want to use it. So here I'm going with another one, I really love the shape of this one. Again deciding where I want the main glass to be. Always make sure that the outside is going to fit nicely. For example if you cut out only the inside maybe you will find out that the handle doesn't fit on your panel and then I can run all of them together through my die cutting machine. For that I'm using my Gemini just because it has a really big platform and I can die cut all four of my cards with one pass. So here are my windows and what I have up to now and you can see that I'm working on all four cards at the same time. Now it is a good idea to do the stamping on all these panels now because when you put the shaker elements together this is going to be quite dimensional and it's going to be very difficult for you to do some stamping. Another way is to just die cut sentiments and stick them on top or to stamp your sentiments on a separate piece of paper and cut out thin strips of that and stick it on top of your card again. Now my ink pad needs re-inking so I will have to do that a couple of times to get a good impression. So for my small cocktail glass I went with Sip Sip Hurray. This one is called Coffee Mag but it can easily be a tea cup so I'm going with You Are My Cup of Tea. This one is called Pined Glass and I'm going to create a beer glass there. So I went with Let's Celebrate but I'm not going to use both of these words I just cut it out with scissors. I'm never afraid of cutting out my sentiments with scissors to make them work for my card and I can always put them back together. So for this card I'm going just with the word celebrate and I will later on stamp a secondary sentiment and stick it underneath. And now it's time to put together my shaker windows. There is some double sided tape at the back but first you need to attach that pouch at the back of your panel. So for that I'm going with glue of course you can use some double sided tape if you like. I'm going to place it there and this is completely symmetrical so it doesn't matter how you are going to put it inside. It's going to fit nicely. I'm going to leave that pouch to dry and I'm going to go on the next one. And I like how this Pined Glass has two compartments which I'm going to use separately so that I can have white at the top and golden beer at the bottom. I'm going to leave that to dry and move on to the next one. Again doing the exact same thing for the rest of the glasses. Now as the glue is drying I'm going to use the ties to cut out the actual glasses for the front of my card. So I'm going to place one die inside the other and for the first glass I'm going with gold cardstock just because I want to reflect the gold color of my beer. I went with my new wooden looks at the back. This is going to fit perfectly over those two pouches and there is another die cut at the bottom. I'm just going to use the the gold one that I die cut but of course you can switch colors. Now for my beer I'm going with festival gold circles. These are by Nouveau. I'm adding a generous amount and just because this pouch is quite big I need to have enough there and I am using my hunt a little spoon by Nouveau. Now for the top of my beer for the beer top I think it's called beer head. Anyway for the foam I'm going with white and this is crystal cloud circles and just like always you will find everything I'm using linked down below. So now I need to peel off the backing and for the back I am going to cover it up with a scrap piece of paper. I used my yellow oxide ink to ink it up at the bottom so even when you shake the card and those golden elements are moving you can still see some yellow at the back of the glass and here is my panel ready to go. You can shake it as much as you like. I absolutely love that and especially the part that it comes with two compartments. Now I'm going to complete the sentiment by stamping one more thing, a secondary sentiment that says your birthday just on a thin strip of white paper and I'm going to stick that just below celebrate with some foam tape at the back. I have some foam tape at the back of this panel and I'm going to stick it on a blue card base that I look through my stash to match the color of my background and here are some close-up photos on the first card for today. Now for this one I'm working with the small cocktail glass. I used the two dies one inside the other and I just cut out a simple glass out of white cardstock. Of course it can be any color that you like. I am using glue at the back and I'm going to stick it on top and for this one I'm going with green cocktail just because it's going to contrast nice with the yellow background that I have. The sequins that I'm using here are quite big. The color is prickly pear again by Nouveau and you can see again a generous amount. I'm going to peel off the backing and place a scrap piece of green cardstock and finally I'm going to stick this panel with foam tape at the back on a piece of yellow cardstock which matches perfectly the colors of my background. The foam tape that I'm using if you are wondering is by Arteza and I do have a coupon code for that down below in the description area. And here is a close-up look on this card as well. Now you can also decorate this even more if you like on top of the glass and I will make an example on the last card on how you can add extra bits and pieces on one of those shaker cards. Now for the next one I am going with a mix of sequins. This time I'm using candy pick hexagons and hot pink stars. These are absolutely gorgeous both of them. Again a generous amount so that my glass looks full. Pilled off the backing and I have a scrap piece of pink cardstock that is going to cover up nicely my shaker window. And now again with foam tape I'm going to pop this panel on top of a pink card base that matches perfectly the pink on my background. Also notice that I did cut out the main shape of the glass out of white cardstock and again you can go with any color that you like. On this card I'm going to add some more embellishments so here I added some dots of glue and I'm sticking on top some of the stars that I used on the inside of the glass. The sentiment comes from the tea and coffee stamp set and I went with cup of happiness that I stamped and die cut with a burner die. And in these close-up photos you can see how sparkling this confetti mix is. And now let's move on to the last card and this is supposed to be tea. For that I went with Desert Sunset Stars by Nouveau again I'm going to peel it off and I use a yellow scrap piece of cardstock for the back. And just like I did for all the rest of the cards I'm going to use foam tape at the back and stick this panel on top of a cardstock that matches one of the colors of the background. I also used the dies one inside the other and cut out the frame of my glass out of brown cardstock and now I stamped one of the tags from the stamp set coffee and tea and I'm cutting it out with my scissors. I am leaving just a thin white border all around and just like I said I'm going to embellish it and dress up this card even more just to give you some ideas on what else you can do on top of a shaker card. So I'm going to add a foam square at the back of this tag and I'm going to place it as if it is coming from the inside of this tea glass and now to embellish it even more and turn it into looking super cute I'm going to add a dot of glue on top of the glass and I cut out a red heart which I'm going to stick on top and I think this is my favorite of all four of them. Let me know in the comments below which one you like the most. Now here are some close-up photos on the tea card and here are all the four shaker cards that I made for today while playing with my oxides and stencils to create fun backgrounds and then playing with those shaker sets by Tonic Studios. Just like always you will find everything that I used linked down below. I hope that you had fun and that you got inspired as we spent some time together today. Don't forget to like and leave me a comment. Thank you all so much for watching and I'll see you all next time.