 Γεια σας, είναι Vicky εδώ, με το νέο μάθημα. Σήμερα θα δημιουργήσω 8 καρδιά χρησιμοποιώντας από τις τελευταίες εργασίες μου. Λοιπόν, ξεκινήσουμε με την πρώτη καρδιά. Για την πρώτη καρδιά χρησιμοποιώ με το στάμψετο που είναι called Cooler With You και χρησιμοποιώ κάποιες στιγμές. Πήγα με την πόλαρ μπέρα που είναι μπέρα και κάποιες φίλοι, όπως η Πέγγουινα και ένα κομμάτι της μπέρας. Πέμ sparks Chaos and I'm Stumping Everything with my Black Mement Nedash just because I will be using my Copics to color my images later. So here are all the images ready to go and now I'm going to use the matching dies to cut them out. Notice how I have placed all the dies over my designs but at the same time I'm going to use another set of dies, this is the winter trees and I'm going to cut out some white ones because I think that they are going to complete my little scene. Αυτή τη στιγμή δεν ξέρω πως πολλές τρεις θέλω να θέλω, δηλαδή θα κομμάσω ένα κομμάτι από αυτά και θα δείτε ότι τελευταίνω ότι θα τελευταίνω να χρησιμοποιήσουμε μόνο τρία από αυτά. Λοιπόν, θα πω τα εμπάνια μου. Τώρα, με το κουλί με το νοβάλι, υπάρχει ένα νοβάλι που κομμάσει ένα νοβάλι, που θα χρησιμοποιήσω να δηλαδήψω ένα κομμάτι στο νοβάλι. Λοιπόν, αυτό είναι το μέρος που η λευταία πόλια μου βάζει. Και θα πω από τη σύ ortή αυτό ένα από τα στέλια και με αυτό το τρόπο θα χρησιμοποιήσω το νοβάλι μου. Λοιπόν, θα τα πατήσω από την στιγμή μου και θα βλέπεις το βινό. Θα αφού το αφήσω και θαπω να ξεκινήσω με αυτή τη λευταία. Λοιπόν, θα δείτε ότι έχω ένα κομμάτι στο μέρος. Τώρα, στην στάση, θα χρησιμοποιήσω ένα κουλί μου, και τώρα θα σημανω στο κομμάτι και ασταταστεί. Θα χρησιμοποιήσω τα κομμάτια να κομμάω το εξαιρετικό. Και έχω my little window ready. Τώρα με το κομμάτι ακόμα θα πω τώρα στο κομμάτι και να χρησιμοποιήσω κάποια κομμάτια και έχω δεύτερη κομμάτια στους κομμάτια ώστε ότι η κομμάτια μου σημαίνει καλύτερα inside. Θα χρησιμοποιήσω τα κομμάτια με τομμάτι του εξαιρετικού κομμάτια. Θα μεταχωραστεί εξαιρετικού κομμάτια μέσα ο οποίος έχω χρησιμοποιήσει. Θα αγτώ αυτό με ένα πιστυπbau του εξαιρετικού κομμάτια και θα δεις ότι η κομμάτια μου θα είναι πολύ σημαν вопрос. Είμαι πολύ δημιουμένη σε πόνο, και τώρα έχει σ ہταση να μεουν βεγιάση το κομμάτι. Αυτό σπιτιτ που βάζω στους κομμάτια είναι το slamar. Θα χρησιμοποιήσω τα κομμάτια έχω το very bottom of my card base. So now I'm going to stick the little creatures on top of my card. I'm just using some tape adhesive at the back. And for some of the images I'm going to use just tape adhesive and stick them directly on top. And for some others I'm going to add some dimension by using some foam squares at the back. And now it's time to stamp the sentiment. For that I used this die to cut out a banner out of white cardstock. And I'm going to stamp the sentiment with black ink. For the sentiment I went with the one that says to my coolest friend. And I'm also going to embellish that banner with a little heart that I have coloured with the same Copic marker that I have coloured the scarf of my polar bear. So it matches perfectly the image. I'm going to add some foam tape at the back. Stick it on top. And now the only thing I have to do is to add some snow on the background. To do so I'm using my Nuvo drops in white. And I'm going to add the snow only at the background. And I'm going to finish off my card by adding some shine with my clear wing of Stella glitter pen. For my second card I'm going to stamp some images from the some bunny I love stamp set. And I'm choosing the bunny that is sleeping on the bed. And I'm also going to stamp the teddy bear. I'm going to stamp everything with my memento toxido black ink because I plan to colour everything with my Copic markers. But before I go ahead and colour my images I'm going to use the matching dies and cut them out. And I'm going to do some plan ahead here just to see where everything is going to go. So I'm going to place them at the very bottom of this cardstock and I'm going to separate those dies. These are from the stitched triple pick-a-boo window and edge. And I'm going to use only the edge die and cut out this white panel in half. Now this white panel is likely smaller than a standard card. So I'm going to secure it with a post-it tape. I'm going to run it through my die cutting machine. So I end up with two pieces from this cardstock and I'm actually going to use both of them. So I'm going to work on the top one for now and this is where I'm going to create the sky. And I'll leave the bottom one for later where I will be creating my little scene. So now I'm going to create my sky and for that I'm going to use four different distress ink colours and you can see all the colours on screen right now. I am applying my distress ink directly on top of my cardstock and I'm blending the colours with my blending tool. And I get a lot of questions on how you can end up with a nice and smooth blending. Now all I can say about this technique is to go very smoothly over your cardstock. Don't press too hard, don't apply any pressure at all. Now I never load my blending tools with too much ink. I prefer to load them again and again rather than load them with too much in the beginning and then I cannot blend the ink that I have on my paper. I hope that makes sense. So now I'm going to darken up the edges with black shoot and then blend them in with my blue colour again and I'm happy with how my sky is looking at the moment. I am going to apply some powder just to make sure that my embossing is going to end up nicely and make sure that your ink is totally dry before you go ahead and do embossing. Otherwise the embossing powder is going to stick all over the place. So I have stamped the sentiment with my VersaMarking and now I'm going to apply my white embossing powder and you can see the mess there but with the magic of video editing everything is nice and clean again. From the stamp set I chose to use the sentiment that says dream until your dreams come true and I'm melting everything with my heat gun and now I'm going to go ahead and cut out some of the stars and I used the matching dies from the stamp set to cut out stars and the moon out of gold cardstock So I'm going to stick everything down on my sky and I like to place everything on my cardstock deciding where everything is going to go and then I'm moving them slightly to add a little bit of glue underneath. Now I went ahead and used my Copic markers to colour the bunny and the little teddy bear and I'm going to assemble back the cardstock So this match is perfectly since I have cut it out with that die and I'm making sure that it's nicely secured at the back and I'm going to add some foam tape which is going to add a little bit of dimension on my panel and now it's time to assemble my little scene so I'm using some foam tape at the back of the bed I'm going to place it at the bottom part of my card and I'm also going to add the little teddy bear again with foam tape to finish off my card Now for the third card I'm going for a clean and simple look So first of all I'm going to use this straight edge and I like it because it adds stitching on both sides of the cardstock So I'm going to secure it and I'm going to run it through my die cutting machine and I end up with two pieces Now with the very bottom part I'm going to stamp the sentiment and for the sentiment I'm going with the one that says hope you are on the mend and just because this sentiment is too long I decided to cut it in half and stamp one below the other Now you don't really have to cut out the stamps if you don't want to You can just mask off the part that you don't want to stamp each time and now I'm going to use this die set which is called Band-Aids and I'm in love with it I'm going to use the smaller band-aid and I'm going to cut it out two times out of a craft cardstock So I'm also going to cut out the tiny little heart out of a piece of red cardstock and I'm going to cut out all the pieces twice So I end up with two band-aid sets Now I'm going to assemble my card I'm adding some foam tape at the back of the white panels and as I'm going to stick them on top of my card base I'm going to make sure that they don't match up perfectly So one is a little bit separated from the other I'm adding foam tape at the back of the second panel and as I stick it down you can see the gap that I leave in between So now it's time to stick those pieces together with the band-aids I'm going to stick them down and then stick the other pieces on top of them This is going to create a dimensional look without actually adding any bulk on top and I'm also going to use my glue pen to add a dot of glue on both band-aids and stick the hearts on top And now I'm going to finish off my card by adding a little bit of gloss on top of the hearts to do so I'm using my Nuvo drops That's clear It's pretty much the same as glossy accents and it's going to dry totally clear although it looks milky at the moment And here is a close-up look where you can see all the details on those band-aids For my next card I'm going for a shaker card and I'm going to use some dark blue cardstock which is going to represent the sky and I'm using my powder tool at the very bottom of that cardstock because I plan to do some embossing The sentiment comes from the stamp set that is called Stars Above and I chose to go with a sentiment that says I thank the Stars Above for a friend like you I am applying gold embossing powder and I have melted the powder with my heat gun I hope you can see how shiny it looks now Now about the little bits of a powder that I had from my powder tool Don't worry about that You can just wipe them out with your fingers Now I'm going to choose three stars from the Stars Above die set and I'm going to place them on top of my panel secure them with some post-tape and then I'm going to run them through my C-6 machine which is going to cut three windows in star shapes So at the back I'm going to create a shaker card here So I'm adding some tape and I'm going to stick a piece of acetate which is going to cover up all three of those windows I hope you can see the windows here I went ahead and used my foam tape all around those shapes and now I'm adding some sequin mix in gold I have covered up the windows with gold cardstock and for my card base I'm going for a top folding card which is again in gold I'm going to complement the gold sequins inside those windows And this is a beautiful and sparkling card Here is a close-up look For the fifth card I'm going to use the stamp set that is called Our Story This December release by my favorite things has so many beautiful stamp sets that is so difficult to choose a favorite but I think this has to be the one So I'm going to create a scene You know I love creating scenes on my cards and I have chosen the little girl that is sitting on the armchair I have chosen little bits and pieces from the rest of the designs and I'm going to stamp everything with my Memento Tuxedo Black Ink So you can use your favorite coloring method I'm not going to share coloring the images just because I have to share 8 cards and it would make the video too long and I'm going to use the matching dies to cut out everything So here is everything ready to go From the latest paper pad collection I'm going to use this patent paper with the stripes which is going to be the background for my card and I'm going to create the scene here So once you color everything the card goes pretty fast from there on all you have to do is to decide where everything is going to go and for some of the images I'm going to stick them directly on top of the card with glue while for other I'm going to use some foam which is going to add some dimension and create the illusion that some things are in front of others just like the cute little kitty here which is sleeping in front of the armchair There is a puppy as well in the stamp set So depending on your animal you can choose your favorite and you already know that I have a ginger cut so I just couldn't help it ahead to add that cut there Now I think this card is looking really adorable All I have to do to finish it off is to stamp the sentiment and for that I'm using the sentiment that says read, relax, repeat from that stamp set and I have stamped it on one of those banners that you can cut out if you use the stitched sentiment strips from the same release I used foam tape at the back for some dimension and this finishes off my card So now let's go for a very colorful and happy card with lots of flowers This is on the white panel and I'm going to use both the edge and the windows and after running it through my C-6 machine this is what I end up with so I have three little windows there with a nice bottom edge and this is going to end up on that yellow card base So now I'm going to use the Kindress die and cut it out of white cardstock and I'm going to stick the word Kindness at the very bottom of my card base Now I'm using my Nouveau Glupin at the back and stick that on the card and since I wasn't paying any attention I went ahead and added the dot on top of the letter D instead of the letter I and don't ask me why I took me a lot of time to realize that the dot wasn't the wrong place but I was lucky later on to be able to take it off and place it in the correct position So anyway I'm going to stamp the rest of the sentiment here and I'm going to do some surgery of sentiments So I'm cutting out bits and pieces from this sentiment that says a little kindness goes a long way So I'm going to stamp a little on top of my die cut Goes a long way at the bottom which means that I'm going to omit the word kindness from that sentiment Since I have replaced it with the big die cut in white So my sentiment is ready at the bottom of my card and now I can go ahead and stamp the flowers All these flowers come from the Doodle Blossoms collection and again I haven't shared how I colored everything, I just used my Copic markers and as you can see I have used the matching dies to cut out the flowers as well as some leaves and some stems and actually the stems are cut out of green cardstock So I'm adding some dots just to make them cuter here and there on the flowers and now I'm working on my window panel and I'm adding some foam tape at the back which is going to keep it raised from the background and I want to stick inside some flowers coming out so I need to have that dimension My card base is a standard card base that's 4.25 x 5.5 I'm going to stick the panel at the very bottom of my card and now I can stick inside the flowers So I'm going to decide where everything is going to go first and once I'm happy with the placement I'm going to commit and add the glue To finish off my card I'm adding some shine on the flowers with my clear wing of Stella glitter pen Now for this card I'm going to use the bedside comfort die set and I'm going to cut it out as it is, everything and what is great about that is that you can create a dimensional tray with little bits and pieces to put inside and it doesn't actually come with a matching stamp set So I'm going to pop out everything So I am going to decide how everything is going to be assembled So I'm going to go for a bowl with the spoon inside the vase with the flowers as well as the napkin inside that paper napkin box Now I'm going to use my Copic markers to color everything and for the spoon I'm going with that glitter pen which is going to turn the spoon into silver and very shiny one I hope you can see the shine which is really difficult to catch on camera Now I have went ahead and cut out that tray the two pieces from the tray again out of wood crane paper and this is going to give a great texture to my distressed inks So I hope you can see the texture now it really looks wooden and I am first going over it with vintage photo I'm applying some ink with my blending tool and then again I'm going over it with aged mahogany which is going to give it an even warmer color So I'm going to cut out thin strips of foam tape and add them at the back of that piece and then I'm going to stick that on top of the tray which is going to turn the tray dimensional Now I'm going to put on some music and let you see how I assemble everything so that you can take a look on how everything comes together and I'm going to assemble the vase with the flowers directly on the final card So here is my card base I want to create some interesting background So I'm using the stencil This is the star grid stencil and I'm going over it very softly with distressed ink I want to keep this card clean and simple but at the same time I want to have a little something at the background So now it's time to stick everything down and I'm going to place everything inside my tray by adding some glue at the back I'm going to finish off the flowers by adding some white dots my new drops as well as some polka dots on the bowl with the soup and now from the feel better stamp set I have chosen my sentiment which I'm going to stamp with black ink at the bottom of my card that says sending hugs and get well wishes and this is going to finish off my card and for the last project for today instead of creating a card I'm going to create a bookmark So I'm using the stamp set that is called Bookworm but I'm going to stamp it with Toxido black ink on white cardstock and again I used my Copic markers to color everything and then using my dye to cut it out So now I'm going to go through the pattern papers and decide which goes best with the coloring on my little girl and I decided to go with the green one I'm applying a lot of tape on top of my tag and I'm going to cover it up completely with that pattern paper Now this is a bookmark that I'm making for my daughter she loves to read books and she always needs new bookmarks So I'm going to place the little girl on top of my tag and then I'm going to use my crop-a-dial to add the whole bag at the top and I'm going to place a gold eyelet with my crop-a-dial again so I can thread through some ribbon You need to remember that if you are making a bookmark you need to keep everything flat since this is going to stay inside the pages of a book you shouldn't use any foam squares at all I'm using my scissors to trim the tails of the ribbon just a little bit and my tag gets pretty much finished All I have to do is to add some shine by using my clear wing of Stella glitter pen So now let's take a quick look on everything that I have created for today Don't forget that there is a full list of all the supplies that I used today down below in the description area on YouTube as well as on my blog And these were the cards for today I hope you had fun and got inspired and if you did, don't forget to leave me a comment as well as give me thumbs up on my YouTube channel and if you want a closer look to the December release by my favorite things then click this video Thank you all for watching!