 Welcome to Tech Talk. My name is Aaron and today we're going to be talking about cleaning your non-skid surfaces. The products we're going to be using are a deck cleaner, a magic eraser, a non-skid deck wax, a shami, and a hard bristle brush. Today, we're on the all-new Open 282. As you can see, we've got a little bit of a dirty deck here, so we're going to hose it down and try to move as much of this dirt out as we can without having to use any product. Today, we're going to be using a non-skid cleaner. You can also use your normal wash and wax soap, but I prefer the non-skid cleaner because it really gets down deep into the non-skid and gets rid of that dirt and grime. It also doesn't require you lugging a bucket all around the boat. It comes with a real convenient cap. It allows me to just kind of squirt over the whole area. The next step, I get this nice hard bristle brush and just start scrubbing it in. I normally let the products sit for two to three minutes after I scrub it all in. That way it really removes any excess that's left. I like to also do it in sections. This way, I'm not getting ahead of myself, and I can make sure that I don't miss anything. Our yacht-style non-skid is a lot easier to clean than some other manufacturer's diamond. The nice thing about this is we actually put it on in the mold, so it's way more durable. Well now that I've got this back section done, I'm going to let it sit for two minutes and work my way forward. The product's been sitting out for about three minutes, so the next step is just to hose it on off. Now that I've got my deck cleaned, I'm going to take this Magic Eraser and clean up a couple of little areas that I wasn't able to get with the brush. For that extra step to keep that deck looking nice and clean, I recommend a non-skid spray wax. The first step is you want to liberally apply it to the entire non-skid area. You'll then want to follow up with the medium to hard deck brush. Now that the product's applied, all you got to do is let it air dry and walk away. If you guys have any questions, post them in the comments below. If you like this video, hit the like button or subscribe to our YouTube channel. Thanks for watching.