 Hi, this is Kevin. Today we're going to set up this printer. At first, we want to open it up, lower it, and so we can see all the ink is flowed to the bottom. Now I reached the level a little bit, I reached the tank level a little bit, so now it's resting. What happened is that there are two chambers in the tank, so now the only ink is in the lower chamber. So the upper chamber will be empty, so when you remove the plug, you're less likely to get the ink on your hand. Let's set this little trick. Make sure you have something to cover your fingers, so there will be no ink explosion, especially when you're situated in high altitude areas such as Denver, Colorado. Save those little plugs for future use. You may need to move this printer, but when you're actually using this printer, you don't need those little plugs. See? No ink spill. For the pair of cartridges, we need to remove them from, we need to lift this clip, just push forward, up and forward, and now remove this protective clip. Same thing for the collar. And now we need to tear off the blue protective tape. And now they are ready to be inserted. Now to insert the cartridge, you hold them as a pair and make sure the cable is not twisted. You sort of don't do horizontally, you sort of like sitting here, from here with the angle, pulling up, and just push it. If you find that the orange is a little bit hard to push, you separate, use your fingers, separate the clip a little bit, and do that. This is what it looks like after you insert it. You can see the color one or the orange one is just a little tiny little bit lower than the black one. It's easier if you start by moving the cartridge all the way to the right. Because if you stop here, you have to tuck this in and close the door together without twisting it. So without making a kink out of it. So I push all the way to the right, and I close the door. So two turns long, and push here. The automatic feed scanner opens like this. If you find this printer always jammed because you didn't load the paper correctly, this printer has a really weird way of loading paper. Okay, to load the paper correctly, what you do is, what you shouldn't do is, you shouldn't just put it in, okay? You need to pull this whole tree out until it clicks, okay? And make sure this is wide enough. Now you pull the paper in, you're gonna feel the paper is stopped by something. When you feel it is stopped, you push the whole tree back. You can hear the printer has a big sound. That means you loaded the paper correctly. As far as how to install the drivers and how to set up your network, if you have any problems, please call Canon. And they should be able to help you. This is a brand new printer, and they are more specialized in their software and hardware, and we don't have any Mac experience, so we really don't know how it runs on Mac. And if you have a Windows Incompatibility, it's better to call Canon than us. You can print another check by go to control panel and divide some printers and right click on the printer you just installed, go to printing preference, and go to the printer. And then maintenance, the another check, and then you'll click on print check button. Most natural check will come out nicely. Let me show you one example if the natural check come out not desired. So here we are missing a bunch of colors. If something minor or just go to control panel and go deep cleaning, and then clean all the cartridges. In this example, the first cleaning did a pretty good job that still we have some missing colors. So we're gonna take out the emergency repair tool that's included in package. Do this over some old newspapers. You're gonna have a clip, although you're gonna get the same color. You can see one of them rubber slot is longer, one of them is shorter. And the longer one in here is the green one. That's for the black. And the shorter one, shorter select is for the color cartridge. I'll put this on the color one first. So you'll center it, press it down and forward. Now you'll flip the cartridge over and they use the included syringe to draw inks into the syringe. Now you can see there are lots of air bubbles that's what you removed. And then just use a paper towel to wipe clean the surface. Now we're gonna do the same thing for the black cartridge. You only got one clip and two silicon pads. So now you need to swap the silicon pads to work on the black. If you don't feel any suction, it's probably you're using the wrong pad because the black pad is longer. Okay, so fixed. Now you need to go to your local restaurant and ask them if they can give you a free lunch. You can print hundreds of their manuals for them. You're gonna see the ink level coming down. However, that's actually the printer estimate level. The printer doesn't know how much ink left in the cartridge. And so it just count the number of pages printed. You got a big ink tank and you got tube goes into the cartridge. But the cannon doesn't know that. So you need to turn the ink level monitor off. However, you cannot turn it off anytime. You only can turn it off after the page counter goes to the max. And that's ink level goes, it shows depleted. So you need to ignore all the low ink warnings. Just like me, just keep printing until one day you run over the limit. Now once you run over the limit, you're gonna get a 1688 or 1666 errors here. Actually, if you see the ink level, the black barely move. Now by the computer through a big air, so the red cross on the black sets it right out. And also we got this window, 1688 or 1666 window. Do not close this window, just keep it open. Without open, without window open, go back to your printer and hold down the stop button until you see the window disappear or you can see the LED screen and the change. So it go back to me. And now you can print happily ever after for the black and it will do the same thing for the color. And they only do once in the cartridge lifetime. So you just keep printing and printing and printing forever and ever and ever and ever. And now you'll check your ink level at the external tank. This is how much ink I used to print a dust stack of paper. And now we try to run the color cartridge down. You can see from the window, the black is red out. That means you turn off the monitor. The color is not, the color has a yellow exclamation mark on the top, that means it's still going with low ink, sort of low ink, okay. Okay, checking 1688. Okay, I already told you earlier how to do it. Hold down the stop button until a, with both unit monitors turned off, now I just run it down and run some ink level down. So I can show you how to refill it. Here we open up the tank and then we remove the larger plug, which is refuel plug. And now we squirt ink in. You want to raise the tank a little bit so you don't want all the ink coming down while doing this. And that's about it. And put the large plug back and you're back to print me. I hope you enjoyed this video. Visit us at www.bchtechnologies.com or locally at Greensboro, North Carolina. Cheers. Time for lunch.