 Hello, this is Laptop Media and today we will show you how to open the HP Omen 17-2021-17 CK-000. First of all, you have to undo 8 Philips head screws. Unluckily, the inside clips of the bottom panel are extremely stiff and the bottom plate is almost glued to the base, sadly, but the removal of the bottom plate isn't an easy job. Especially if you don't want to cause any visible damage to the notebook's body. In this scenario, you can use a pry tool like this one. The easiest way to pop the plate is to try your luck around the area that is close to the two back edges, beneath one of the two hinges. Then, you can use a standard pry tool and you can start to carefully work your way around all sides of the laptop. Please remember, it would be of great help to us if you just hit the like button and subscribe to our channel. That would motivate us to make even more and better videos for you. HP uses an 83-watt hour battery which sounds decent for a 17-incher. Memory-wise, the laptop has two SO-dim slots that can handle up to DDR4-3200 MHz RAM in dual-channel mode. When it comes to storage, this HP Notebook has 2 M.2 slots, one is Gen 4 while the other is a normal Gen 3 slot. We can spot two dedicated metal cooling covers for each M.2 slot with pre-installed thermal pads for better heat dissipation when the NVMe is under serious load. The big cooling solution has three heat pipes, two of them are thicker and they are shared for CPU and GPU cooling while the third one is solely dedicated to cooling down the video card. The two big plates are meant for cooling the memory chips and the VRMs.