Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Apr 19, 2012
https://www.1aauto.com/1A/wheel-beari... 1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning front wheel bearing hub. This video is applicable to the Chrysler Town and Country, years 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, and 07.
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver • 10mm Socket • 15mm Socket • 19mm Socket • 21mm Socket • 32mm Socket • T45 Torx Socket • 1/2 Inch Breaker Bar • 3/8 Inch Breaker Bar • A Piece of Pipe (for leverage) • Ratchet • Torque Wrench • Rust Penetrant • 8mm Allen Wrench • Floor Jack • Hammer • Jack Stands • Large C-Clamp • Wire Brush
1. Removing the Wheel 1:31 2. Removing the Brake Caliper 2:45 3. Remove the Rotor 5:09 4. Removing the Hub 6:41 5. Installing the Hub 8:56 6. Replacing the Front Brakes 10:33 7. Replacing the Wheels 13:47 8. Testing the Brakes 14:09
⚠ DISCLAIMER: While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.