 Hey everyone shaver 1000 here today. We're going to try to fix this automatic salt shaker thing Quit working the other night Lake comes on But the motor won't So so let's see if we can figure out what's wrong with this thing Okay, so like I said the light will come on And the motor should be running right now and it doesn't we put new batteries in it to see if that would Do anything and it didn't do anything so I Don't know how these come apart or if they're supposed to come apart Which I doubt it but a couple of little screws down here at the bottom But the motor is not turning so there's a couple of screws up here at the top And I see where the lights are there. Let's go ahead Let's take these two little screws out. Let me get a screwdriver Then if we have to we'll take the bottom off See if we can fix this thing I'm going to use my little 62 one precise electronic screwdriver, so I did a review on this a company sent that to me. I didn't buy this but you If you follow my channel, then you've seen I've used this many many times a little light on it forward and backward Let's see It's a little one it's like that one there, so let's try to How I can zoom you guys in without getting in your way That's a magnetic strip. It will hold your metal screws for you Need to get one on blue mats This is what adjusts How fine or coarse you want your salt? Or pepper we have another one over there. It's got pepper in it spring. It's like it may have gotten moisture in there But okay, so let's Yeah, I know I should take the batteries out But there's a reason I'm leaving them in because if this thing starts working. I want to know about it so And I can't see what size screws them are kind of weird I Don't think I don't think they're Phillips Something really weird. Well, they look like a Phillips. Let's go With another size bigger, okay Just had too small. It was too small Thing about is that little switch. I keep hitting it all the time. Yeah, I see some salt I've been here There's the motor right underneath this thing. I see it See a screw down in here. I didn't think that thing would take that out But it did it magnetic in there because of the the motor there's two. Yeah, I've never had one of these apart, so I'm not sure how they come apart Another one down in here Yep Then we should be able to Besides I want to see how that switch works. You know what I mean? Yeah, there's a bunch of gears a little bit of lube there With salt on it Now mind you though. She did Put regular salt in this thing Yeah, I can't turn that motor There it is So how's it turn on? Okay, so what I'm gonna do I'm gonna take this gear these gears out of here I'm gonna clean this out real good And you think they wouldn't made it a Little better to where that salt's not gonna get in there like that. That's horrible Still not sure how turn it upside down kicks it on, but okay, let me get this all cleaned up May take it outside and blow it out But my guess would be that be that you know what real quick. Let's If I can Yeah, monkey said maybe moisture and I'm like well, it shouldn't have moisture But it kind of does with all that oil they got in there. Yeah, see Now the lights don't come on I'm gonna miss in here. Okay. There's a light starting to come on lights are on I Don't hear the motor running. All right guys. Let me get this cleaned out There's why We've got a solder or a wire here That's why the motor is not working. Let me get it cleaned out first. I'm gonna take it outside blow it out real good Get it cleaned up and then we'll solder that wire on Oh, sorry Okay, so here we go So I can do this with this thing It's soldered the whole closed Man, I can't see That's what I did. I soldered that whole closed. I know you guys can't see I'm sorry, but I need to get me a microscope They're a little on the expensive side, but Man just once like right now Because then you can record what you're doing You guys would be able to see it better Instead of having to take my word for it. Let's put a piece on that ground wire there a little drop. I mean And I just unsoldered it Never get the feeling Should have left well enough alone And they didn't really There wasn't much solder on these things Only what I put on really Yes, I soldered that whole closed too Get my tweezers out There we go All right, so there's that Now oh man, I just had this all cleaned up. Look what I did I just set it down and all that salt All right, let me go blow it out again just to make sure Okay, let's try to get this back together Shoot, I've got a whole bunch of parts over here. I'm all cleaned up I may have to take them in and blow them dry But I'm afraid if I do that I'll blow them right out of my hand and launch them across the shop. You know what I mean And I don't want to do that with these little tiny gears Hopefully you guys seen how these gears came out of here because I really wasn't paying attention I know those three went on this still I looked all over I I'm not sure how that switch goes or how that turns on or anything, but It works somehow by turning it upside down Now as I know I know these three went on here Here is a little gear Right there All right. I may have to Shut you off And see how I took this thing apart Now that's gotta go like this, right? No There's nothing to hold that gear center. So this goes down in here It goes in them Two little screw hold How they go All right, let me study this again This goes out the top and you know that so this has to go Like this This definitely goes out the top that's where This screws on too. Oh, this must be some kind of bushing here. Maybe up here at the top. Yeah, okay Yeah, that's a bushing. I do believe So I think it went like this I still don't know how this turns this well. I hate to say it, but I'm gonna have to I'm gonna have to roll this video back because this is not making sense Oh that has to go down in there I see Maybe I won't have to shut you off That little gear's got to go in the center of that Of those ones and I'm so close Because what else would turn I think there's another little gear there Yeah I'm right This center gear Goes down in the center of that Of those three gears like that the same way with this And then it's all got to drop down into here Okay, say like that and this one has to sit down in the center of these three like that Now this That's to sit down in here Like that as I get it lined up I don't know if they're all supposed to be Like the same way or if they're supposed to be different. I don't know because they turn so it shouldn't matter and then these Will correspond with that thing That turns All these gears there's that And this Goes like that and this I think is a bushing Oh, no I thought this was on top Yeah, if it was okay, then this went down in there Well, I got this upside down it goes like this Where's it going like this has to go like this, right? I don't remember taking it off that way. Yeah, that's a little like that There we go. Ah, let's go ahead and put this back one I gotta get there's other two screws way down in there Third one's still in there. I better get a bigger screwdriver here Third one never came out. So that's good And they don't stick so I'm not sure What material they are They're not sticking to this magnetic Thing which kind of blows because I got to get these way down in there So Tweezers out here in the wrong end. I do that every time you know They were sticking to that magnet on the motor Hey Aren't they or is it They're sticking to the magnet on the motor Okay, so let's magnetize my thing There we go Just had to magnetize it Ah Hang it and I got them both out great But if you want to magnetize a little screwdriver if you have a magnet around Just take the magnet run over it Or you can hit it with a hammer a couple of times that will also magnetize it The wrong screw The problem is it's a Real sturdy magnet in that motor and it's pulling it off off my bit And over to it All right guys, this is brutal. Hang on. Let me get this down in there So you guys don't have to wash me fiddle fart around this thing. All right. I got that part back together So all we got left is the bottom, but I want to Put the batteries in See if this thing works I don't know if it needs solving in it to turn something on Or what? Because I still quite haven't figured that out And really should switch We need so well the lights coming on Motor still not turning All right I'll kick you back on. I'm going to take that back apart again. Okay, so We've got a contact problem there And this little black thing that's a switch You turn that upside down It makes contact and when you flip it up It doesn't make contact So I'm going to get this wire soldered back on here If I can And then we'll see if it works. All right guys, I think I got it Let's look that's quite a little switch in there All right I'm going to put this back together Before I lose a bunch more stuff. I lost one screw. I got it back I lost this spring. I got it back. I can't believe that she had another set of these And she just sold them there Day before that's there. Anyway, she just sold them and I was like, man I could have used that but All right, I'm gonna blow this out some more I'm gonna put this on Take a battery out first I'll put that bottom on there Won't go below this off Now we'll put it back together together As in you and I Yeah, they don't make these very tight because You know salt right there's the end of the motor And the salt has to go through this hole Right here So it's not very You know And we all know what salt does to metal and copper and aluminum Yeah Yeah, it really uh Really eats it up I think got de-magnetized And I had everything right because I as you can see I had this one out Took that one apart to make sure I sorry guys to make sure I had everything right And I did so But I have to take this piece back off Well, these things are tiny Also had to get this out monkey's little Magnifying thing It helped This goes down on Oh no Scared me there for a minute guys This goes down on And our little nut thing Yeah, how that works is seal that Room in there Depending on how coarse and fine you want your salt Like that would make it real fine the tighter you go The looser you go makes it less coarse All right Now I'm going to put a battery in here And put this back together and I'll be back with you. Okay guys, here we go See how fine that is Now if I loosen this up It'll be a lot coarser See the difference See that difference Now I'll tighten our Tighten it up there a little bit Now you can see how fine it is Now Let's put the batteries Back in the pepper Well, I took the batteries out of the pepper to put in the salt See if that was a problem Of course that wasn't it So, whoops, and I just knocked you guys out I know it's had to be foreshadowing because when she first got to she had one battery turned upside down And it wouldn't work I thought oh man, I gotta pick up my mess It's 10 minutes to 1 a.m. So it's actually Friday morning, but I wanted to do something and Well, I did it I didn't think I was going to get it fixed because usually there's a little tiny wires like that because I mean Sorry, I mean them things are small really really tiny All right guys, I'm going to clean up Wash my hands Get ready for bed. We'll see you guys in the next one. Have a great weekend everyone Also, if I can get a video up for you this weekend and uh Hope everyone stays safe. So that being said shape here to met the man legend. Well for now guys, thanks for watching Appreciate it. Thanks for supporting my channel. I really appreciate that too We'll see you guys in the next one. Bye. Bye and take care everyone