 Hey guys, it's Kevin. Today we're going to fix this HP only. You can see it cannot detect the paper tree anymore. No matter if I open or close the paper tree, I always say a paper tree is missing. I'll flip the printer over and we will see the problem. One of the printer lag is missing. There should be another lag right here. There is only one lag that's important. That's what I would call the pointy lag. It's like a pointy. If you see from the top, it will be on your left. The other lag, the head is kind of flat. I call the flat head. If I flip over, the pointy lag should be on your right. Let me get a good one to show you. On the bottom, it's on your right. On the top, it's on your left. This flat head is useless. To save the argument, how about I just break it through the way? OK, let's fix this. Every HP's part has a part number. You just flip over and check that part number. This one is F0V63-40013. I mention this because it may be compatible to other printer models. You might in a different country, you have a different model number. And just make sure this part number is exactly the same. We'll go to bchtechnologies.com. And then we go to printer parts. And under HP, we go to paper handling. And in the paper handling, we go to paper tree and stacker. And then we can get this repair kit. I'll put the link to the kit above. I'll put the printer upside down. And then I slide open the paper tree. I put a piece of masking tape to remind me where to install the leg. You can see this part of the leg is really thin and is transparent. That's going to help us to line up with the grid. Take a closer look. You're going to see where the leg broke off, kind of stem of the leg. If it wasn't bring up clearly, you might just get a knife. Just trim it a little bit. Again, the groove of the new leg should line up with the grid perfectly. And it's semi-transparent. So you can see where your groove is. Now you can get some piece of tapes. The first piece is to secure it on the top and then get a piece on the left and a piece on the right. Make sure everything is flush. Then you can close the paper tree. Make sure the paper tree inserts smoothly. If it is not, find out where the obstruction is, then correct it. When the problem is solved, and your closed paper tree is to show you this paper selection manual. OK, I hope you enjoyed this video. Visit us at www.bchtechnologies.com locally, Greensboro, North Carolina. Cheers.