 What's up everybody? Oh, I see people are jumping in but I don't know how to see the chat. So there's that. There's Bob. Bob, how you doing? Looks like we're getting a couple people in here. This is a random quick update and pretty much explanation. Explanation is a good one. We're pretty much remodeling my garage and hey David, how you doing? London. It's got to be like midnight or something out there. So we're pretty much remodeling the garage. We're going to turn it into a much nicer area but most of all a new 3D printing space. Nice. And this area behind me and I'm going to change the camera in a second but this whole area behind me is going to be all, let's see, that area right there is all going to be 3D printing space. So a new work area per se for 3D printing. So I've been busting my butt along with some really good friends of mine and my wife and redoing my whole garage and I kind of have everything piled in the center right now. And that whole space there is going to be all new 3D printing area. We're going to put a new ceiling in and redo this whole thing and climate control it. But what's going to be cool is it's kind of a mess right now because we've been working nonstop. But hey, Willie, how you doing? So but we've been working nonstop so all those new bins, Damien, how you doing? Are actually going to go on new shelving and the new shelving I just, we just put all the walls in that you see up so far. We got this side painted and I just built all these shelves here and my wife is priming them. We're going to paint them. And then I'm going to put the decking on which is still over there and once I do all that I can move stuff and do that wall. But this whole wall here we just did and all the new electrical and we're going to work on the ceiling here probably next weekend I'm guessing. But this as from what you can see right here which is a good chunk of space there is all going to be dedicated to my 3D printing. So that is what we've been doing. That's why I haven't put out a ton of videos lately because we've been really working hard on the garage and new 3D printing space, the shop and it's going to be awesome. So thought I'd do an update. I know I haven't put out a ton of videos here in the last week or two. We've been trying to plan for this, trying to get it ready. I tore it all out and there was nothing but studs and we rewired the whole garage. And right now it is pouring rain outside. And there's a wall we still haven't finished because the new electric needs to go in here. But Willie did you ever get to where were you going to go? You're going to go buy some or maybe potentially buy some 3D printers. I'm not sure if you're still on. I got to email you about that I forgot. But like I said, I wanted to do a quick update. That's the reason why I haven't done a ton of new videos. I got some really cool stuff I do need to film, some more TH3D stuff. And I also have, let's see if I can flip this around here. So I have some more TH3D stuff I've got to film and some more cool stuff coming from them. I also got in the mail something new and it might be a new setup for an extruder. Not using a Bowdoin tube, which will be awesome. Hello. It's all shaky, see, jeesh, more caffeine. But so I got to film that and I got to film, I got to get on my C-M-E-C-N-C stuff too. I got a Rostock Max V4 is what I have and I need to get my videos going on those too. The bench I have downstairs is actually too tall for the ceiling and it's hard to film with that. So this is going to be much nicer in here. But yeah, that's why I haven't done a lot of videos lately. I've been trying to keep them out but we're trying to get this space done because I really want to get in here and start using it. So I'm going to do a full enclosure. I know that for sure so everything, all my printers will be fully enclosed. And so what I'm thinking is doing a, as you can see here, all my smaller printers underneath a full-size workbench so you can work on top of them enclosed. And then my bigger printers, I'll raise it up and we'll have a raised area here. And then in the corner, I'm thinking about, depending on how much space I have, I might do a desk and or something there, put a computer and start working. And I believe I'm going to do a filament cabinet so we can keep all our filament in here. I am outside, I'm in the garage, it's not attached to the house. So I've got to watch the climate but yeah. So what would you guys add, let me flip this around. So if you guys had a 3D printing space or if you do have a 3D printing space, what would you add to it? What would you do to make it different or what would you do to make it awesome for 3D printing? If you had a space or you know, you were going to build a space, maybe you already have something that's awesome that I don't know, shoot in the, I wonder if you do this, shoot it in the, that's not going to work. Here we go, let me get it back over here. Shoot it in the comments, if you have something that more space, yes, if you had something that you would put in a shop or maybe you want to put in a shop, if you had a shop to put it in and have any ideas at all. Like I said, I'm going to do a fully enclosed workbench so all my printers will be underneath and then there will be a workbench above them so I can work on stuff and then I'm also going to try to have them all on sliders so each printer I can just pull out one by one and work on and then slide it back into the cabinet which will be pretty cool but what do you think? What would you add? What would you do besides more space? More space is good, that's why I'm doing this because I needed more space. And Bob, I think I saw a comment on you, it flashed real quick on my phone but the nanopolymer you said is awesome. That stuff is awesome, yeah that nanopolymer is amazing. The workbench, it'll be fun to build but it'll be awesome when it's done. I didn't think about vibration from sliders, that's a good point, good point. So I was thinking like a drawer slider, like a heavy duty toolbox slider on a half inch or a thick piece of plywood so I knew it was pretty sturdy. Hey maybe I'll do that, maybe I'll set up some cameras when I'm building this or maybe I'll even do some live streams when I'm actually getting into the 3D printing area because I haven't done much live stream in here just because we've been doing everything else, putting walls up, we insulated it, we have not, as you can see above me, we have not done the ceiling yet so we are going to reinforce the ceiling and then we're going to put a ceiling in and then we're going to insulate that. This rack behind me I built last night and I finished it this morning so as you can see it's a huge storage rack and it's going to put these bins on it so it'll be all nice and uniform and we just didn't have a ton, the way the garage here was organized when we bought it, it wasn't finished at all and it did not have really any organization so we decided to do it ourselves and it's going to be awesome. I was going to do a big shed, a 3D printing shed and run a power out to it but then we decided you know we'd rather just do it in the garage and make the garage really nice. So it'll be awesome as far as work space we're going to have a lot of that. So let me flip this around here. So with the exception of the ladders and the bins, this whole area, let's see if I can get a better view of it, so that whole area over there will all be 3D printing space. So from the electrical outlets you see here all the way to that wall will be 3D printing space and it's huge, it's a big area there and I'll give you an idea. The window there is 48 inches wide so that kind of gives you an idea of space there. But we're going to put new windows in. As you can see I put a ton of power, there's 6 outlets just in that area alone and then I put power all over but I definitely, well maybe I'll do that, maybe I'll make a video about building the cabinet, that'll be cool. Anything else? What would you guys put in your space? Oh, my camera went dark all of a sudden. I'm going to do some organization up top, maybe bins and hanging space so I can put, you know, why is it so dark all of a sudden, jeesh. So I can put, you know, organize, if I can talk, so I can organize, you know, parts and anything I need really. What would you guys do? There we go, man it's really raining outside. Maybe to wash all the sawdust off that I created. Let's see, good afternoon Christopher, ooh a wet bar, I like it, you know I have a bar in my basement but I may do something out here for that as well. We're in the midst of remodeling so this is about, now that wall, it's only about half the wall so we got another half a wall and then we have the whole unfinished wall down there too. So hey you never know, wet bar is good. Chris Travis, we are in Wisconsin you know, yeah that's a true story. Robert, how you doing? We were just, I was just walking through the new 3D printing space. It's in my garage here, we're going to make a pretty good size 3D printing area, I got to see how much rain is coming in here, ah it's not that bad. It's really raining, as you can see maybe and I have my garage door open to make sure everything's not getting wet but yes, if anything, if I don't have an actual wet bar, I'll have a mini fridge or a fridge in here either way. So I'm thinking about, you know I'm just throwing stuff out there because I really want to make this a cool space but I'm thinking about doing a filament cabinet so I can store filament in here like he said we're in Wisconsin so you never know what the weather's going to be so what I'm thinking about doing is, wow I'm bouncy on this, is doing a filament cabinet like a dry box you know but a big one so I can I can display the filament and maybe even have a lazy Susan in there, have it lined up on the lazy Susan and you know be able to like spin it around and grab your filament out of there all the colors showing and I'm just throwing ideas off the top of my head here, let's see, I think I saw some, yes a heater and an air conditioner for sure. Hey Chris, how you doing? More lighting, definitely that's coming so currently we're really only looking at that light up there but I'm going to, it garage-wise I'll probably have three or four more of those but I'm also going to bring in, when I film I'll bring in my light boxes and my goal is to be able to hang my light boxes from the ceiling and then pull them down and maneuver them where I need to maneuver them from. A heater and an air conditioner like I said awesome and so my plan on that is I'm either going to do one of the ones that go on the go on the ceiling or on the wall I mean and I'll do it like up above the there or I will do some sort of combo unit I'm not sure we could do forced heat which would be easy because I have gas in the house so we could run that out and do heat that way but air conditioning keeps the humidity out too so I need to do that and that just might be, I could do something as easy as throwing one in the window when I need it. How many printers do I plan to run? Great question, currently how many do I have? Currently I have three, we donated one recently so currently I have three but I plan to have some more coming. Under five probably I want to play with a CR-10 or a CR-10 as pro so I can get some videos out on those even though I know they're older printers but a lot of people have them and I had people asking me about them. What else? Yes, I did so we insulated all the walls. We insulated all the walls already so anything like behind me that has a wall, let me switch cameras here. So any of these walls here are insulated and then when we get the roof reinforced we're putting a ceiling in and we're going to insulate up there too. So we're going to make sure this thing is dang insulated and I'm going to do some new garage doors when we're done to make sure those are good because these are really old and falling apart. Yeah, pig board for tool storage, good idea. Definitely looking into that, paying some tools up and maybe even some trays but like Robert asked how many do I plan to run? I plan to run as many as I can get in the cabinets. We'll find out. So my Rostock Max 4 is a pretty tall printer so that area of the enclosed cabinet has got to be about 48 inches so about 4 feet tall to make it even work inside and be fully enclosed. Yeah, exactly, all of them, Willie. What's up, Brian? So we're just looking at my garage, looking at space that I'm in the middle of creating for 3D printing. So the idea is once I get some of this crap that's in the center here up onto this storage that I just got done, I will clean out a lot of this spot and I can start working on the other parts of the garage like that part that's not finished, corner over there that's not finished and then most importantly that whole area I can get down here. So about this whole area here is all going to be 3D printed or 3D printing space so where I should be able to film, where I can do my printing, all that stuff. Yeah, I got a good idea of networking for internet. Cleaning up around the house, me too, let's see, I literally spent all weekend out here unless I went to sleep but that's it. So there's a lot of work already, I'm just making sure I didn't miss anything. Stereo system, yes. Chris Travis, I actually own a DJ company, an entertainment company. So I have three total systems so that will be good. I had some friends say put some speakers in the ceiling but I have a little bigger speakers they won't fit in the ceiling. So we'll make sure that there's a stereo out here for sure. Film for internet, yes for sure. Slide rollers on your machines so they can slide out, yep. I was talking about that earlier, that's exactly what I want to do, I want to put basically some heavy duty probably like toolbox sliders on and that way each machine sits on a slider or at least on a platform that all slides out and I'd rather do it independent so if one is printing, I don't have to pull them both out. 24 inch slides on Amazon, they're amazing. Hey if you have that link, shoot them to my email, Jim at theedgeoftech.com. That will be awesome, I'd love to see those because once we get rolling it's going to be sweet and I think it'll be awesome to be able to slide them out one by one so if I need to change filament or work on one I can just slide one out. Yes, I got that in the mail, I don't think I responded, I just saw the email about 10 well right before I came out here I looked through my emails. I have literally been out here all weekend so I haven't been looking at emails or anything yet. Yes, Chris Travis, that is exactly what we're doing, we're making a studio in the garage for videos, for all my printing, all that stuff. And Matt, thank you so much for that, I can't wait for, I can't wait to get that on there and give it a try, I'm hoping, I'm really hoping to get that done in the next week or two, I hope that's okay. I'd love to do it out here, I'd love to be able to do it out here because I think it'll be much better but I don't know if I'm going to, how long I want to wait to do that video. So for those of you who don't know, Matt or Matthew in the chat that was talking about he sent me a direct drive kit, I alluded to that earlier, I got a direct drive kit in the mail, Matt sent it directly to me, Matthew did, I'm not sure if he goes by Matt or Matthew but I'll say Matthew because that's a screen name. And yes, that would be cool, I didn't think about the logo on the wall but now I'm going to do that. Anyways, so that's a video that's coming up, he sent the direct drive kit for the Ender 3, I believe it works on other, Matt you can correct me on that, it could work on some other printers as well, but I know it works on the Ender 3, I'm trying to see my chats there. And we're going to change one of them over to direct drive which will be awesome. And I think that direct drive will go really good with something else I have coming from TH Streetie soon. So that'll be a fun thing. Ender 5 has a different kit but almost all the Creality machines, nice. I did, like I said, I got the kit, it is still in the packaging it came in, I didn't even get time to open it yet this weekend. So I'm hoping to do that pretty quick. I know we are leaving soon, we're going to go to my in-laws house to celebrate a late birthday with my wife and with them for Memorial Day and thank you. Alright, let's see, what else? Yeah, see you later Brian. So I will, my plan is I want an Ender 5, I want a one for a long time, I can't wait to get one. And also a CR-10 style machine, the CR-10 Max, I don't know if you guys see that now. That's about to come out and that's going to be a monster like 460x460x510 or something like that. And I'm hoping I can get one of those to do some videos on and if you have an idea let me know. I don't know if Willie is still on but I got to email him, see if I can get myself one of the CR-10 machines that he was talking about the other day on his channel. Oh you don't like that, hey Jake, nice. I can't wait to get an Ender 5, I'm not worth the extra, it's just something about it, something about it. I've seen some sweet prints, CR-10 S5 is a monster, yes. I think that's 500x500x500 or something like that. But I do have to get flying, we've got to get to my in-laws, we're going to do some dinner and celebrate, oh no, that's funny Matthew, oh man. Not sure what you did but that's hilarious. Well if you want to get rid of it, email me, yes. See I think that'd be the only downfall with the Ender 5 for me, if I put it in this cabinet that I'm talking about that won't be able to be worked on unless I slide it out, yes. I think people like the CR-X, there's nothing wrong with the CR-X. Thank you, I appreciate the link but I do got to get flying in the comments below or in the comments you're leaving now. Anything you guys would add to your shop space, if you're creating a whole new space for your 3D printing or 3D printing related area, put it in there. Let me know what you would add, I'm looking for ideas to add to mind. Extra garage insurance, I'm going to have to do that, yes. Along with connected smoke alarms and I'm going to have automatic fire extinguishers, all that fun stuff. Beer taps, beer taps is a good one. We will have a fridge out here no matter what, I don't know if we'll do, we have a bar down in the basement and we're going to have a pergola or we're going to have a pergola with a bar on the patio so I'm not sure if I can add that but you know what, I could probably do like a K-Gerator in here. An alarm system is a must and I already have a ton of cameras, I already have a bunch of cameras up but there will be more cameras installed. Security is a big thing, especially with all the new power I have out here I can I can light up this place with security cameras all day and put some alarms in and actually I'm going to work with Tim from TH3D, he's got that whole house automation stuff down and and I'm going to work with him on a bunch of that stuff. Raspberry Pi Rack, I will definitely be doing that. That's a cool idea. Like a little rack with all of them on there and run one for each machine. That's a pretty sweet idea, I like that. Coffee machine in my, if I do all that I'm never going to have to leave the house. But anyways, throw your comments in below or keep commenting. I got to get going, we got to go do some dinner. You guys have a great night. I'm sorry I didn't have a ton of videos out lately but if you check out the coax video I did a tour of coax. I threw a video out there today. There is a 15% off discount code. Right now I think you have to, I think you have to spend $49.99 or something like that which is like two basically two or three spools depending on what you get and then they'll do 15% off and I know if it's over 50 bucks they do $5 shipping anywhere in the US. I'm not sure about outside the US but I know in the US they do $5 shipping flat rate which is great. Yes, thank you. I appreciate that and if you want to get rid of your under five let me know. I'm just joking. Thank you guys. You have a great night. We will see you soon. I got some more videos coming up and I'm going to try to do some more of this when we're actually building the 3D printing area. Maybe I'll do some live streaming or at least film it to put some videos in it. Someone asked me to do a video about building that cabinet so maybe we'll even do that. But you guys have a great night. Thank you so much and we'll see you next time. Later.