 Γεια σας! Είμαι Vicky εδώ και σήμερα θα φτιάξω ένα καλύτερο σαμερακάρδι χρησιμοποιώντας από το τελευταίο ρελίστο by Simon Says Stump. Για ξεκινήσω χρησιμοποιήσω αυτή η ρεκταγία. Αυτή έχει ένα καλύτερο στιγμή, που είναι μια εξκλουσία χρησιμοποιώντας από το τελευταίο ρελίστο. Και θα χρησιμοποιήσω δύο πάνερες. Οι πάνερες είναι το ίδιο σημανικό, αλλά έχουν χρησιμοποιήσει δύο χρησιμοποιώντας από διαφορετικές κόλες. Είμαι θέα παιδιά της διαφορετικής κόλας, που οπότε θα χρησιμοποιήσω ένας καλύτερος τελευταίο ρελίστο, και θα φτιάξω ένας κόλος δύο σημανικών. Και θα τα χρυμαστεί να βρίσκω ένα ρελίστο μέ�ου ο κάθος της δυο κόλας. ένα πόνο από την πόλη του μπροστά. Όπως μπορείς να δεις, δεν είμαι χρησιμοποιημένος να κομμάσω το καρδί. Και προσπαθώ να πάω μετά και μετά, like 2 ή 3 φορές από τη λάμψη που βρίσκω με τη σκέφτα μου, instead of pushing too hard, because if you push too hard, then you might move your roller and have an accident. So you can see that I'm just sliding my craft knife there 2 or 3 times and that let the knife do the job. I am going to create a little sakeer out of this for my little scene for today and the idea here is to add some confetti and little fish just behind this little window to make my card more fun. So I will go ahead and add some acetate at the back of this panel and to do so I'm using my scissors to cut out about the correct size using my acetate and this acetate is actually from packaging and I'm also using my tape adhesive to stick this down at the back of the window. All the supplies that I'm using today are listed and linked just below the video in the details area as well as on my blog. Now out of this panel when I cut it out I have saved the upper side and this is what I am going to use at the back to create the window and I am going to be using some foam adhesive and I am going to cut it out in little pieces and stick it at the back and as you can see I am going to double up the tape adhesive and this is going to provide a bigger area for the little confetti to move around. I will make sure that I go with a tape adhesive all around the window and this is going to make sure that my little confetti is not going to go anywhere when someone is shaking the card and now it's time to add confetti on the inside of the window and these are confetti that I have from a card kit that I got from Simon Says Stamp so this is by Martha Stewart. To make my window even more fun I am going to create some fish so I have this stamp set and the matching dice which is from the latest release that has a couple of fish stamps and a couple of fish dyes which I am going to use so first of all I'm picking out the dyes and I am going to stamp those fish using some different colors of Simon Says Stamp ink pads I am stamping way more fish than the ones that I am actually going to use at the end but once everything is there I can go ahead and use my dyes through my physics machine to cut out all those little fish now as you can see I am using every bit and piece of my card stock so I never like to throw out my scraps I am adding some details on their eyes with my gel pen and I will make sure that I add all those fish inside the window making sure that they face the correct way I am peeling off the foam adhesive and I am going to stick on top the other part of that panel and one of the fun parts of creating a window card is always to test out how your little saker is working out and I'm really happy with the outcome so I can now use some tape adhesive at the back and stick it on the other panel so this is going to be the sea and the other lighter blue panel is going to be the sky to add more interesting on my little scene I am going to stamp one boat which comes from a new stamp set from the latest release by Simon Says Stamp and I am going to stamp it first on white cardstock and then I'm going to paper piece it and I'm doing so because I want to have the white border all around which I am going to have if I stamp this image and cut it out with the matching die so I will be using the die and run it through my physics machine and then I can stamp again the same boat on red and yellow cardstock this is also by Simon Says Stamp and then I can use my scissors to cut out all the little parts I am going to be using my glue pen and stick all the little pieces on top of my boat I am going to stick the boat over the sea by using some foam squares at the back and this is going to add a little bit of dimension on my card so I'm securing the boat there and now I can go ahead and stamp the sentiment I'm using the sentiment from the same stamp set as the boat and I will be using my embossing tool to add a little bit of powder there this is going to make sure that when I stamp with Versamark and apply the embossing powder the embossing powder is going to stick only where it's supposed to so I'm going to white emboss the sentiment and I advise you to stamp the sentiment before sticking the boat because I had quite a bit of difficulty there to make sure that I had a nice impression just because the boat was dimensional and I couldn't press hard with my acrylic block so I'm heat setting the embossing powder and my main panel is ready all I have to do now is to stick it at the center of a folded card that's 4.25 x 5.5 I always kind of eyeball where the center of the card is when I want to stick my panels on top but the grid at my craft table always is a big help for this and my card is never finished without adding a touch of wing of stela clear glitter pen so I'm going to add a little bit of shine on the boat and that was the shaker card for today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel Here is the shaker card in action and a few close up photos of the card Don't forget to subscribe to my channel if you haven't done so already because this is the way to tell me that you love my videos and you want to see more For more inspiration you can click on any of the videos on the screen and if you are watching from a mobile device you can find links to those videos just below in the details area Thank you all for watching!