 The following video will demonstrate how to enroll a wireless zone into a 2GIG GC3 smart area. Smart areas will show a status of disabled until at least one zone, key fob, or keypad is added to that area. To enroll a wireless zone into one of the smart areas, first press the 2GIG logo. Enter the installer code. Press System Configuration. Then press Wireless Zones. Select the desired wireless zone number. Then select the Smart Area Assignment Subquestion. You can then select the smart area you want this zone assigned to. If this is a new sensor you're adding to the GC3 system, you'll also need to complete all other programming subquestions as well. Complete the other subquestions by first selecting the subquestion from the list. For each of the subquestions, you can view a drop-down list of options by pressing the list icon, or you can type the numeric code for the desired option. To move on to the next subquestion, select the question from the list on the left side of the screen and repeat this process. Once all subquestions are completed, press Return to System Configuration. Press the back arrow. Then press the back arrow. And press Save. When you press the Smart Areas button on the home page, you'll see the smart area is now enabled and contains the Arm Stay and Arm Away icons. The wireless zone has now been enrolled into a smart area. Make sure to subscribe to our YouTube page and click the Show More tab underneath the video where you can view valuable links pertaining to this product, similar how-to videos, and our low-cost, no-contract alarm monitoring services.