 Γεια σας και ευχαριστώ για ένα άλλο βίντεο για την καρδιά. Είμαι πολύ καλύτερο για την καρδιά, όταν πω πολλές καρδιά χρησιμοποιώντας ένας πέμπρος, οπότε αυτό είναι σημαντικό που θα κάνω σήμερα. Και αν έχεις κάνει με τα καρδιά της Κρίσμας για αυτή την χρόνια, μπορείς να το παίρνεις αυτά τα καρδιά της Κρίσμας για να χρησιμοποιήσεις τα καρδιά της Κρίσμας. Σήμερα, είμαι παίρνει με την Κρίσμας Ρομάντη Κολέξιον από Σταμπερία. Είχα δει ότι αίξω ότι αρέσει τα καρδιά της Κρίσμας και θα τα παίρνω πάνω και και πάνω. Υπάρχουν πολλές προς σε αυτή την καρδιά, αλλά για το προσοχοπίωμα μου, θα παίρνω μόνο με το 12 x 12 πέμπρος. Θα πω στους πάνω πολύ γιωτοί. Λοιπόν, μπορείς να δείξεις τι είναι το πάνω. Οι εμπειρές είναι τα καρδιά της καρδιάς, και τα τραντωμένα σημεία. Και χρησιμοποιώντας ένα καρδιά της Κρίσμας για να βρεις τα καρδιά της Κρίσμας είναι really a cheap way to go, since you don't have to buy expensive stumps or even coordinating dies. You can just use your basic dies that you already have in your stash. And especially for today, I have a 20% discount code for you. You will find it down in the description. And the discount is not just for this collection, but site-wide. So make sure to check it out. And let's start with the first card for today. I will be playing with this beautiful pattern paper that gives you lots of options for cards. And I'm going for the little girl that is hanging those stockings. I'm going to use one of my rectangle dies and try and decide which way I want her to go vertically or horizontally. This is something I always do with beautiful images on a pattern paper. It's just a way to audition them. And I also use two rectangle dies, one inside the other to cut out this frame. I'm going to use thin strips of foam tape at the back so that I can pop it on top of the card and add some dimension. And of course, for this design, you can easily add an acetate so that you can turn this into a shaker card. However, I'm just going with a frame. All the cards today are going to be quite simple. After all, I'm working with beautiful pattern papers, but I'm going to show you little tips and tricks on how you can take them to the next level so they are just not a cut-out piece stuck on top of your card. So in this card, for example, I created a frame that I popped on top and I also cut out a few little snowflakes with a little die that I had in my stash for ever. I'm just sticking them down. These are going to add an extra element that pops on top of the card. And at the center, I'm going to add a little sequin. I did go with those silver ones. I think they are gems, actually. And you can actually use whatever you have on your stash, either sequins, gems, or even you can use your nuvo drops at the center. You can stamp a sentiment on a thin strip of paper, stick it there, then you are good to go. I did go with one of my ready-made sentiments. These are cheaper sentiments at the head for ages. And it's time to use them up. And my card is ready. Here are some close-up photos on the first card for today. And really, with a beautiful image such as this one, you don't need to do a lot. Moving on to the second card and this time I'm going to use this boy with the snowball as my focal point. Now, one thing that you can do is to use this as a tag directly on top of a card. However, I feel like this one is shouting to cut it out. So I'm going to cut out around him. He is really easy to cut out to fast cut so that I can pop him on top of my card to a dimension. And when I do fast cutting, little details like this can drive me crazy so I'm using my craft knife to cut out that white space in between his head and the arm. Now I need a background for him and I will use this pattern paper making sure that I don't ruin the little image at the back making sure that I keep that girl intact. So I'm going to cut out this background with snowflakes and this is going to give me a 4.25 x 5.5 standard A2 card panel. And for this card I'm going to do something really fun. I'm going for one of those infinity shaker cards. So I'm using this as a tag by Waffle Flower that has those four flaps. Those flaps have adhesive so all you do is to add your panel inside wrap around the three flaps that I have already built off the backing and I left only the top backing on top so I kind of created an envelope. With my bone folder I press hard so to make sure that I have good adhesion and then on the inside from the top I'm going to add a few stars these are silver stars these are completely flat so they are going to move nicely inside that infinity shaker card and then I'm going to peel off the backing from the top flap and wrap it around. In any case this is a really great trick if you want to somehow enhance and add something extra on an otherwise beautiful patterned paper that you don't want to cover up and you don't want to do anything on top of it and although I used that on a background this time it is a great trick to use it on one of those beautiful images that you don't want to cover. So here I'm just preparing my sentiment I went with a ready-made one and I did enhance it a little bit with a strip of red cardstock it matches nicely with the gloves of the kid this goes directly on top of the acetate and then on top of that I'm going to add the boy you can definitely go with foam tape at the back of the sentiment and the boy if you want to add dimension however this infinity shaker sits kind of dimensional so I didn't feel the need to add foam tape on top and when you're creating Christmas cards it's a great idea to grab any foliage dies that you may have in your stars cut out a few elements and just decorate your cards Here I used some dies from Studio Light which I have been using and load these couple of months for my Christmas cards this year and I cut out all these foliage from a vellum that gives a lovely softer look So here is a close-up look on the second card for today all I have to do is to stick it on top of a standard card that's four and a quarter by five and a half and here are some close-up photos and I think this one out of the six ones that I'm sharing today is my favorite let me know in the comments below when the video is finished which one of those six cards is your favorite and let's move on to the third card for today and this time I'm going with Santa I'm using my scissors to separate him from the rest of the patterned paper but this time instead of fuzzy cut him just like I did with the poi I'm going in another direction just to show you another idea you can just cut him as he is in a rectangle then one way to create a card out of this one is to add little bits and pieces to decorate this rectangle and I'm doing that by cutting out some of those letters from to Santa from this patterned paper I'm also going to use my paper trimmer and chop off that letter a little bit so that it's not going to cover up too much of Santa and there are other letters that you can cut out even at the front cover of the paper pad as well as on this paper now I'm working on this card panel and that's A2 in size I'm just inking up the edges with black suit I want to distress a little bit after all the images from this patterned paper being touch look and feel and that's what I want to bring on all the extra elements so that I kind of bring everything together so here I'm just using a text stamp I'm stamping around the border here and there it doesn't have to be perfect it doesn't have to look nice it's just a visual texture there so that when I stick the Santa on top it's going to come together nicely and I will distress my Santa but if there are any other cutouts that I have been planning to use I am going with ground espresso it's either this one or vintage photo when it comes to the stress inks for going with a vintage look and feel for me so that's my recipe actually and I'm stamping here and there just distressing all those little pieces and here is mixed media wiki taking over the card making wiki so I just had to add some splashes I had to add some shadows with water this works like watercolor I just used ground espresso with water here after distressing all the elements it's time to put everything together so I'm using foam tape at the back of Santa and I placed him offset on top of my card base now on top of that I'm going to layer some of the cutouts like the letters that I have making sure that I cover up one of the corners without covering up too much of Santa so I made sure that his face is showing perfectly fine and I need more layers so I'm grabbing one of the pattern papers that I used previously and I'm going to cut out some of those tickets I don't want to use them as they are just want to have some elements to tuck underneath the Santa and again I used my foliage die set cut out some of those leaves and the berries I'm going to decorate around the Santa making sure that I don't put anything on top of his face just around the corner and the letters I cut out the berries using a glitter red cutstock just to add some shine on top of my card and with those layering cuts you can keep on adding little layers stuck underneath the rest of them so you can keep on going it really enhances the whole look now I'm using white paint spray to add some splatters these are going to look as snow but I made sure that I covered the face of Santa I didn't want to have any snow there and with these splatters I'm going to call this card done and you can see some close up photos and now for the next card I'm going with this lovely pattern paper I absolutely love that row you can easily separate them and make more than one card I decided to go with the first three ones and I'm just going to separate them with my scissors and as I cut out the roofs I made sure that I keep the snow on top of them for the background of this card I'm going with the back of this pattern paper and there is one that is vanilla colored here with lots of golden snowflakes I'm going to cut out a panel 4 ¼ x 5½ the way I cut out the houses I don't have snow at the bottom so I'm just going to cut out the snow from this row of houses so that I can use it on my card again remember that since we are playing with paper all the cards are really easy to put together if you want to follow along all you need is to grab this pattern paper and you can easily put together similar cards like mine so I'm sticking the snow at the bottom and here is a close up of how this is going to look with the snow at the bottom now what I want to do before I stick everything together is to cut out some of the doors so I decided to go with the green door and the red door I'm just going to cut out this one at the center and this way I can open them up and have a little surprise inside this can be a fun little image you can stamp something or even write down something you want once you cut out the door you can score and I'm going to repeat the same process with the red door just pick which way you want that to open left or right and then just score the sides and make sure that you fold them nicely you can even use your bone folder if you want to and there is this big pattern paper which you can use to give you little images to put behind those advent calendar doors I'm not going to use the advent calendar for this year after all it's already the 10th of December so I decided to use some of those little images behind my doors and I'm just trying to find out which ones I'm going to go I decided to go with the red cap as well as the ho ho ho so I'm adding foam tape at the back of my houses to cover up the openings of the doors and just going around them then I'm going to peel off the packing and place that directly on top of the images making sure that I align them correctly and I will repeat the same process with the other door making sure that you can read ho ho ho then I'm going to place that on top of my panel that I have prepared previously and I have dimensional roof houses with doors that open up I'm using my big scissors to cut off anything that sticks out then for my sentiment I decided to go with Merry Christmas and I'm sticking that on top of that building as if it is one of the labels and you can embellish a little bit more by adding some holy berries like I did here as well as a few white splatters to represent snow now I'm going to show you a car design that works with every image just grab a rectangle die on top of a patent paper to find out elements that you can use as focal points so here for example I have those two birdies I cut them out one vertically the other horizontally and I cut out another same sized panel bringing out one of the colors from the image so here I went with green with the other bird I went with red to bring out more the red of the berries for my cart base I'm going with craft cardstock for both my cards I'm going to recreate whatever I'm doing for one card for the other and one of the best tricks to put things together is to go vintage after all these are vintage images so my go-to recipe when it comes to this type of cards is to go with a card base that is craft cardstock add a little bit of inking all around this can be ground espresso or a vintage photo and also ink up the edges of your other two panels the patent paper one and the cardstock one remember that if you use this recipe you can turn a whole patent paper into cards in no time trust me it works every time just use a rectangle panel and audition which images you want as your focal point cut them out and then put those layers together make sure that once you place one layer on top of the other you offset them so you can see a little bit of that colored cardstock peeking through if you want to enhance your background a little bit and add some visual texture you can do some stamping with a text stamp that you may have on your stash then stick your layers on top and I do have foam tape at the back to add some dimension and then of course add a sentiment either by stamping or sticking by the way here is a reminder if you like my videos don't forget to like as well as leave me a comment and you can also click that bell if you want to get a notification whenever I post a new video these are just a few ways to support my channel so that I can share even more now you can enhance your cards either by some novo drops here I'm just using glitter stickers but depending on the design that you have you can go with gems you can go with pearls or some kind of shine or something extra so here are the last two cards for today you can see it was super simple to put together works, landscape or vertically and you can end up with tons of cards from one paper pad so these were the cards for today don't forget down below in the description area there is a coupon code for 20% off site-wide so you can shop this collection and even more I hope that you had fun today joining me and I'll see you all next time