 Hi everybody, it's Sam at Mixed Up Craft. Thank you for watching my tutorial today. I've got the third project from the three that I was doing from all those stamping up goodies that Kaylee from Create with Kaylee sent me. So this is the last one. I'm down to the last few sheets of my paper. I think I've got about from that paper pack probably maybe four or five sheets left. So I'm going to show you what I've done and then I'm about to make a few little tweaks with one of the flowers because I literally did run ale of that particular color paper but it still looks fab. So this is a really nice reinforced box. It is four and a half maybe four and three quarters. I can't remember. I'll tell you in a minute. But basically it's got really nice half inch and reinforced lid and then it's a one inch box but inside it has all of these lovely little note cards. So these are four by four note cards so they fit perfectly. You see the envelopes at the bottom there and there are six. So this box will hold six note cards with matching envelopes. If I just bring one up here for you to see. There we go. You can see all the gorgeous detail I put together with these cards using lots of the dies, some stamping. Just yeah just had some fun with this and they are gorgeous. So I've got two of each. We've got two with oh hello friend. We've got two with missing you. That's the hello friend and then we've got two with your you're just lovely. There you go. And they're all slightly different shades because they've come off one sheet. All this backdrop here the background paper has come from one sheet of the one with this on the other side. So it's this piece here and it's just this kind of like blended background. So each each card is slightly different. They're more greeny and these ones here are more obviously navy and so on. So that's what I've used for all the cards and then inside they're just blank because they are a note card so you can write a nice message in there if you wanted to turn it into oh hello friend and then you can put just a note or anything like that. So you can add all those bits to it. Got the envelopes there as well which I show you how to make and then these ones are just sitting them on top of each other. So they're kind of like you know alternated so they all sit perfectly and they don't really crush each other like so and then the top one fits perfectly on top and then it's got a really nice snug closure there with the lid on top as well. So this is using for anybody that's not watched the first two tutorials this is using all of the product from the oh so eclectic stamping up paper pack and matching dyes and stamps and pretty much the inks as well because I'm using Night of Navy today and Garden Green as well. So let's start making them. So first of all I want to show you how I made the little note cards. So I'm going to show you one I've already prepared all of my ones for this box that I'm going to be doing. These just make lovely gifts so really really nice and obviously good to sell as well. So I've done loads in there the one I've got left to make today is oh hello friend. So you will need a where did I put everything on my board here so I'm going to take off the card stuff first and then that's everything for yeah that's all for the box so I use all that again in a minute. So this is just a four by four note card you can cut this down from a piece of card that's eight by four and then just score it four inches through the middle these are just pre-bought ones so they worked really well for this and then I've got this to match on top so again I've just chosen one that's got a bit of the green and a bit of the navy there and this piece here measures at three and seven eighths of an inch squared okay so again once that's matted on top it just gives you a nice little one eighth of an inch little frame there all around all four sides that's going to go on top then I've got all my pieces that I've done here and I'm going to do some stamping with you. I've just made little bows here using the matching ribbon so this is the where's the finely woven ribbon and this color here will be because on the back of all of the paper packs it tells you all the corresponding colors so here we've got berry burst emerald emery fresh fig lemon lime twist night of navy peek-a-peek soft sky and whisper white would all go with these patterns and stuff from the paper pack so this one here I think it's the berry burst I believe doesn't say on the front or does it so you can tell oh yeah it does very burst they go I don't alright that didn't even realize it okay so that's the ribbon I've used it's gorgeous ribbon really really nice so I've done one of them then I've got my that was it I'm going to do all the rest with you so we're going to start building this because I'm just showing you the bits that's actually for the lid of the box so let's crack on so first of all I'm going to stick this down just make sure you give yourself a nice even little border there like so then we need to start building up all these lovely little bits and pieces here so with the dye matching dyes here and these ones are called eclectic layer thinnets and just take out I've got some stuck at the bottom so first of all I'm going to die cut this big one and this is this shape here now I've actually cut all around the outside because what this one does is it leaves the die cut in your paper rather than cut it out of the paper so I'm using the stripey piece here and I've just already kind of cut it down so it all fits perfectly there I'm just going to run this one through my machine I'm just going to shim over the top there because there's so much detail in this one just want to make sure it's okay so you can see that so it leaves this wonderful design in your paper but I actually want this piece cut out so all these little bits here what I did is I've saved them all and I put them all into a little container because I've obviously died cut one for the lid of each box that's two and then for each of the six note cards so that's 14 of these I've cut I had so many of these little pieces I've put them all together and now they're great for a shaker card so again if you are ever doing anything like this don't throw these pieces away they're actually really handy and again I could do any color card with this because there's so many colors in those pieces so I'm gonna transfer these across here just so they are safely stored and I can use them for later on and then with this piece here now just with some of my snips I'm just going to just carefully just go around and I want to cut the same width that is in the pattern inside there so if I just do this outer piece here and just show you what I've done like so just bring that up you can see what I've just cut just here I'm just gonna go around and just do that all around that outside and it just gives you a really nice you just now got this really nice cut so that is going to be my kind of back layered piece to decorate the front of this so that's going to sit kind of like that it fits perfectly I checked before it's going to sit on an angle across the card like so so now I need to do a little bit of okay so I'm using the corresponding stamps here so I'm going to take out the leaves and this big flower here and then I've already died cut my sentiment which is this one here so it's just the oh hello friend and that was stamped with the night of Navy okay so I've already done that one so this one here I'm going to festival stamp using just grab some of my swag card here and this is going to be because these are obviously the leaves I'm going to use the garden green so just ink that one out and I love the finish that this stamp gives you so if I just do that one and I want I need one there and then I need I've already done the three for my lid so obviously you'll need one on each card you need to stamp six of these and then three for the the top of the box the lid there so that's another three so what did I say that was the six that's nine in total you would need to stamp of these but I just need to do the one for this card here also what I will do is just remove that one and I will also stamp the flower so that's this one here and I've done it in night of Navy get all the stamping done so again it's just got a really nice I love that look like that faded faded look about it I really like it so that's those two stamps get rid of that one and then this one I need to fussy cut because the die for this one is actually for this piece here so I'm going to fussy cut that there is a die for the the leaves there so I'm just going to cut this one just so I don't know why I've done that and then I'll just cut roughly I want to give it a nice white edge so I don't want to go too close because I'm gonna be doing that and get more detail in a second okay so this one here the die is this one like I said this one here doesn't fit that it's smaller it's to fit this and to die cut separately so and that will give you this one here which I'll be showing you shortly so grab my plates and just pop this one in place and just run that one through and pick it up a really nice little leaf so that's all ready so that one's going to go on there I'm going to fussy cut that one in a minute I'm gonna get these yeah this one done here so the I've got the last piece literally so this is where I used up everything so this piece here is the this color this flower here that I've I die cut it all from that so the reverse is this pattern here this is what I was looking for before this is what I die cut these from the pattern of these but the striping one I just show you just now worked well for it as well so the sheet of 12 by 12 with this pattern on there is this plain color on the other side and that's what I've used to make these ones here now that is the last piece I have left and I need to die cut with these so this one and this one but I need to die cut this twice and I've got none left so I found the stash of this really crazy kind of holographic card but it actually works quite well and the one I'm going to do for the lid is this one here and you can see now when it's die cut and it's got a heart then that kind of pops up so this isn't stamping up I've literally run out the last kind of projects I just I've used so much paper to make these cards so yeah you will use this and die cut this twice but obviously purposes of the video I've got this piece here so I'm going to run through this one first so need to do it twice so this is the last piece love this card really really lovely so let's take that one off so they go then I need to die cut it again so grab this piece here obviously you'll use that same color that you've got so it's going to be one card that's going to have this shiny flower so now that's done so finish with that die and then what I want to do is with this one you then go over this one again and just find where it sits like so again this is such a detailed little die and that piece of card on top it just means I get a really clean first cut okay so now you can see all these just fall out and I've got this really cool little kind of topper and this is going to sit over the top of this PCA so now that's what I've got you can see how great it looks in that textured card and now that will sit perfectly over the top like so so I'm just going to stick that down and then I can fussy cut my flower also what you need to die cut is three of these tiny tiny little leaves excuse me which are this one here you've got an embossed one as well but you want to use the one that die cuts you want to die cut three of them in gold and then obviously prepare your butterfly your butterfly your boom why I was saying butterfly okay so this piece just work out what side it all needs to go just turn that one over once the glue sets and it's all dry you can pick off or rub off any glue that may show through on that mirrored card there but they go so you've got a lovely little flower so I actually do really like that but obviously it's not stamping up so that's that one and then I'm going to fussy cut this one here so again just using my snips and as I've shown in lots of my live crafting that I do and a couple of my tutorials when you fussy cut really all you want to be moving is your left hand the hand with my scissors doesn't actually move it's the hand my left hand that's doing all the work so you just go around there and I'm literally just leaving a very very literally like millimeter or two little white edging there and that just is you're always best leaving a little bit of a white edge because if you're not you know very kind of stable doing this and you're a bit wonky and stuff by having the white edge it hides that whereas if you try to cut this out perfectly even I wouldn't get it looking great and you'd have bits of white showing on one side and then maybe not on the other and it's just you're better off doing it like this and I'm not going into every single little bit just roughly and there you go so how quick that was so that's that piece done and that's going to sit and then I've already pre-cut my little tiny tiny if I can pick them up here just bring it all the way down I've got three little gold here and these are going to sit on my card along with my little sentiment and then my bow so you can do is again just grab a little bit more glue here again with these really detailed dies just going to run that over get that covered and then like I said you're going to sit that down on an angle like so and then I've put these these yep these are on little foam squares so I'm just going to take off just cut let's cut these ones here so bit one two one for the back of this one okay so this one trying to remember how I done the other one really it's kind of like that it's about just looking here I've got this pointy bit and then it comes down so I've got the pointy bit and it comes down there so it's roughly that and then this one I'm going to stick and this one sits underneath so again like so each one slightly different but again that's what's so nice about it and then this big green leaf I'm just going to put some glue just kind of on the bottom to there I want the rest of it lifted see that's all lifted it's only the bottom ones that are kind of upright so then kind of feed that in a bit and just trim the edge because I do want it to go in a little bit further and actually has there we go stick that down and then I'm going to pop my little bow here I always find using your foam adhesive much much better than any other you know it glues and things like that because this sticks really well to the fabric sitting in the corner of the both the flowers there and then I've got my little sentiment which again is going on some more foam so I'm just going to use that other piece and it's only little bits tiny little bits of glue not going heavy with all the adhesives and stuff it's such a delicate little card you don't need to although I am struggling to take off the tops of my tape here it's a bit of a cheap you on there don't want to use that one again and then the sentiment sitting over the boat okay and then you just want to sit all of these lovely little gold leaves just kind of trim this one down a little bit a little bit of glue there and that one's going to sit down coming out from the bow and then the rest I've got one coming out under here and then I've got one and they have it so that is a really nice little note card or birthday card obviously you can just change the sentiment I just think that's really pretty and I love these little clusters that you can kind of make up before have and then obviously you know you could make all that together and stick it all as one separate piece and then you know keep them away and then when you want to make hard you just take that whole cluster out and stick it on your card and they have it so you now want to go and do that six more times obviously you can just do it the once you could have this on a nice six by six card that would make a beautiful just singular singular card yeah so that's that one done now I'm going to move on to the box and actually what I'm going to do is I'm just going to crack on and decorate do the piece first so this piece here measures four and a half by four and a half and this is this one here basically it's the exact same composition since the same little cluster just minus the sentiment but you could have a sentiment on here if you wanted to so again kind of play around but it's exactly the same I've just used two more extra of these leaves so I've got three of the green leaves as opposed to just that one because it was a bigger area that I was covering so my piece here that I've cut I've already got here so I've got a big green one so again that's going to sit like so then I've got my three leaves here there we go and I've got my fussy cut flower I've got my completely glittery shimmery shiny flower there I've got my ribbon ready to do my bow and I have got three more of those little gold there they are these kind of I keep losing them so I'm going to just go ahead now and get that all stuck down that's my decoration for my lid all done so now we can move on to make the lid so keep that over there for a minute so for the lid and for the base of the box you're going to need one piece of six and three quarters squared okay bring that down sorry there six and three quarters by six and three quarters for the lid and then for the base I've got a piece here of nine and five eighths of an inch squared okay so first of all let's yeah yeah let's crack on yeah it's such a hard decision so let's make space at one and a quarter two and a half seven and one eighth of an inch and eight and one eighth of an inch okay and then just rotate your card and do the same again then we'll just score the lid as well while we're here so again so scoring along let me just line up my lines there we go so scoring along the six and a half for the all six and a half pick one of the size you want to score it half an inch one inch five and three quarters and six and a quarter okay then rotate your card and do the same measurement again and then you'll have this grid effect like so and again that grid effect like that so let me just get rid of the scoreboard and then what we can do is first of all we'll just burnish all of our score lines on the lid and on the base okay so all my score lines are now burnish we can do some cutting so I'm gonna do the lid first of all so again pick a side and you want to cut down this is just the same I think I make these nearly every tutorial a nice reinforced lid so you just want to cut the two there so you're cutting down you can see you've got these four little squares just cut right down there and turn it on its side you're gonna cut this one completely out okay and then cut that one off so you just left with this one little square then just go around and just tidy off all the edges so I'm just kind of notching off these two main sides here and then just make this little one more of a tab shape like so okay so then on this same one here I'm just gonna cut straight down like so and again turn it on this side cut that out completely and then cut that one out so again you're left with that little square and then again just tidy off those little edges just cut a little notches out and again little wedges off of both of those there okay so put it against the blue that is what you will have then rotate the whole way around so it's now facing away from you and just repeat that again just as I did before okay so that is now my lid all done then you want to do your base and cut it exactly the same way but it's just bigger so here we've got those four bigger squares so you're gonna cut all the way down like so again all the way down like so so you've got these two like that rotate it cut that piece out completely and cut that one like so so you're left with that square and then again just tidy up the edges and just go around and do all the rest now just as I did okay and that is now what you will have you know looking that's what you'll have your base mumbling all my words so there you go you got your lid on your base so I'm gonna do the lid now first so with some glue you want to pop some glue on the tops here of your tabs just do one side first and then fold it down and then bring down the sides of your lid here and just hold that in place I can see some of the glue kind of coming out the sides there which is good because then I know that I've got my join and it's all nice and kind of stuck right up to the edge there you want to get a really nice bright angle and a real nice corner sharp corner again then bring this one down and bring that side down with it and again once it's in place just hold it there between your finger and your thumb till you get a really nice seal and it's nice and stuck and just repeat that on these two and fold those down as well that's what you will now have then just move that out of the way inside of the outer long pieces here just put some glue you don't need too much just enough to stick it fold it over turn it up on its side and with your bone tool just rub it over there and you can get a really nice sharp edge and obviously that will all be stuck down because all of that glue will then get kind of spread out by the pressure of your bone tool so you can see now I've got a really nice side so again go around to the next one put some glue in this one and just do that for all of your three sides okay and there is your little reinforced lid really easy now grab your base you do exactly the same thing again so this is the bottom that's going to be the inside you always want this side facing up pop glue on your tabs so again just do two at a time okay and then bring it down and fold up the side and just hold it in place and bring that one down and over and just repeat that again stuck down again and then you just want to put glue in there and fold in all those sides there's my base so now your lid will fit really nice and snug over the top because we've reinforced the lid you get that just that really nice like I said you can kind of hear I always say you can feel like the air being pushed out of it that means you've got a really nice closure so there is just a lovely little box as well so it's perfect for necklaces earrings things like that bracelets then we can grab this piece here which is going to sit on top and will give you a really nice little frame so I'm just going to put the same glue just again just lightly around the edges just to kind of stick it in place you don't need to get crazy a little bit through the middle and then just sit that one okay so that's now nice and secure again just a lovely box on its own now and we just need to obviously adding our cards and envelopes but I need to make the envelope so because they are four by four cards using the envelope punch board for four by four card size here you need a piece of paper that's six and seven eighths by six and seven eighths of an inch your first school line is going to be a three and a half so I've already got my paper prepared here in the size so again three and a half so you pop it in line it up to three and a half punch and score then I rotate it so now I've got that piece at the bottom and again put it in a three and a half you don't have to do it this way it's the way I prefer I find I get better results and punch and then I then line up this score guide with the score line so ignore the three and a half now you're just lining this piece up with your line there punch and you want to get it perfectly lined up there so I know now I've got a square coming on rotate it again line up that line if you want more you know seeing more detail how to make envelopes I'll share the little link up here and that take you to my envelope tutorial that I've done using this board so there is my envelopes and now obviously you want to do that six more times so you've got an envelope for every card that's one side and then all you want to do is just carefully because this is just thin paper I need to tidy up that edge there actually oh no hide that one didn't punch it very well actually I'm going to just tidy up some of these edges I think my trimmer's on its way so then I'm just going to have this one here and then these two are going to stick over the tops this is going to be my you know what am I saying seriously I don't know what I'm saying this is my top this is the bottom so all I'm going to do is just run some double-sided tape just down that side there and again this side here this one first stick that one down so it just sticks onto the top there anyway it's disappeared now you won't see it and there you go there is really easy quick envelope okay so again you need to do that six times I've already got all of that ready now so I've got my other five here all ready to go like so I've added my other card that we made earlier on top there and then grab my this one here and they will all sit obviously the size is to fit the envelope so that's bigger and then obviously those note cards fit in perfectly so you have it so thank you again Kaylee it was really nice of you to get in touch and send me the products I've thoroughly enjoyed you know making with them and I've still got a little bit left of the paper so and I think I'm going to purchase some more anyway and as I've mentioned in my other tutorials please go to Kaylee I'll share all of her social network links below in her website and if you do want to purchase any of these products today I will obviously give you all the details to go through and get them from Kaylee so thank you again thoroughly enjoyed this hope you've all enjoyed it thumbs up if you have and subscribe to my channel to see more thanks for watching