 What's up everybody welcome on a Saturday Saturday. Yeah Saturday day How you guys doing I Hope you can hear me. Let me know if you guys can hear me, okay? Because I don't have a guest today to tell me they can hear me. So there's that I'm just watching chats on Streamyard today because I am actually broadcasting on Facebook on my page and on my Regular Facebook profile. So if you guys are joining and Welcome, how are you on Facebook land and on YouTube land? I see Gary How are you Ethan's dad Marcus is here? Marcus and Ethan will be on hot makes this Monday. So wait watch for some promo stuff this afternoon on that Looks like Shane is here I Don't know how to say that Joe Oaks, I think How are you? Andrew Rogers bill Anthony How are you guys all doing out there? I see we got some people on Facebook land. So how are you Facebook land? So here's what I'm gonna do I kind of threw my hair back today and threw on my maker shirt from Milwaukee Maker Faire gotta love a Milwaukee Maker Faire and I'm gonna build this monster. So ecube maker watched our last live stream on the the foreign one the little guy and They asked if I wanted the big version and I said sure and this thing is actually live now on Kickstarter We'll go through it. We'll see what we think we'll see what we think of the packaging and build and all that stuff I'm not Recommending it on Kickstarter, but I'm not not recommending it because I don't know anything about it So I just wanted to do a video. I think the only other video out there I think Chris or Narisse did one on Wednesday I didn't get to watch the whole thing because it was kind of long and I was super busy at work the last few days but He did one and this is another one. Yeah, BC, Canada. How are you? So we're not gonna take too long to say hi and stuff we're gonna get this thing built and get it going because I know these Things take a little bit of time As long as everything looks good and you can hear okay on your side. I'm good with it So today a little bit different We got some uh, we got some fun stuff for you. I got three camera angles. We're gonna do the front one We're gonna do a hey, Dan. How are you? We're gonna do a side one And we're gonna do a desk cam too So we'll see where we're at depending on what we want to do with cameras This is an ecu maker di or toy diy two Four and one so it does regular 3d printing dual color 3d printing laser and cnc Just like the the little one did it's sitting right over here on a shelf, but um, but this is the big version So I can pull that up real quick while we're talking so we can go over that um Let's see Maybe if I could type that would be amazing. There we go. Let's see Poy diy two. I thought I already had this pulled up, but I didn't So there's that So i'm gonna pull up their uh Kickstarter here. I'm gonna share my screen. We'll go through that real quick and We'll look at that. So Here we go I'll just make it full screen. So this is their Kickstarter page. Um, oh, you know what? Let me let me kill the nightbot. Sorry about that Forgot about that. We uh, we don't have a giveaway today But I forgot I had that set up for hot makes now for our with our new sponsor There you go. I just got to turn off that ticker And tell it to stop yelling at us All the fun things all the fun things Yeah, yeah, yeah Timers Disable There we go done Now I feel better about it. Okay. Now nightbot won't yell at us about the giveaways that there's not any of Lightspeed you're right. That's a huge box carry. How are you and family? Um Hey everybody, dany's here too. I think I saw shane in here Chaz is here all right, so Let's talk about this. So This is the Kickstarter page looks like uh 77 backers already jumped in which is awesome This is the new version the toy diy 2 4 and 1 Like we talked about 3d printing dual color 3d printing laser engraving and cnc carving. So this is 350 by 300 by 350 So the other one was a lot smaller than that and uh, so this is going to be a pretty good size machine um I won't go through too much of this because I want to get into the build right away, but It is a lot bigger than um, then we had before it comes without a auto leveling again Just like the other one linear rails uh all the fun stuff and that's that so Yes, the box is huge and not only huge but it is heavy. This is the this is a very heavy box. I'm gonna put my My keyboards and mice is over there Uh, don't forget You guys can always hit me up while we're streaming with the superchats or uh, even better on The pay pals there we go Checking to make sure I had that on there light speed. Thank you so much I really appreciate that by some diapers amen little man is Nine months now he was nine months on the fourth and he started crawling on his nine month anniversary birthday thing whatever you want to call it He was always like scooting and rolling and you know all that fun stuff But he actually crawled now and that's pretty crazy. He's fast Can't see you anymore. I don't know what you mean. Can't see you anymore. I look like I'm right here Hopefully you can still see me Um But yeah, so this is a giant box I want to get this thing built because I want to spend a majority of the time looking at the machine if we can Uh, I think Shane is still watching And I'm gonna meet up. I think I'm meeting up with Shane today. So I chatted Shane if you're watching I chatted you on the facebook's you get a chance. Check it out. Um Best yes best moments for sure. So this thing came wrapped uh in four huge, um What are they those big straps, you know and then wrapped in plastic over that and all of the shipping information and stuff was on the plastic It does have a fragile Or if you're like me and you want to call it fragile sticker on it. Um, so there's that So I don't know how fragile they treated it though the box kind of was beat up um So, but yeah, this thing is a monster. I mean, I don't even know how I can show you the depth of this thing It's big we'll say that I'm gonna set this right over here All right, I just saw your chat there So I'll hit you up as soon as the stream is done and we'll come up with a good time if that works for you, Shane Um, so right away. They actually shot a packing list over. Let's see if I can do this And Show you I gotta get used to the second cameras here It's kind of hard and washed out, isn't it? Well, anyways, it's a packing list So it tells you it should come with all the stuffs um Also in in in true fashion it came with a pretty nice thick book Um, I'm sure it's multiple languages But I like I really like their instructions on the last one and and the these books are really nice from eq maker It is pretty washed out. I might have to figure something out on that one, but Anyways, hopefully you guys can hear me when I walk away from that microphone Oh Go back here. See if I can keep remembering to do that Carey said hi Um, hopefully my chat is not stuck Perfect scorpion king Yes so In this box, it says extruders. You can't really read it. It's a tiny little writing like right there But it says extruders. I promise so we're gonna set that way over in the front here and then Oh, jeez. This thing is this thing is a monster. It's super heavy. So this is We'll give you an idea And this is the size of the packing and it's it's huge um, so that pack came nice and then inside And I I don't know if this will be final packaging or not because this Kickstarter just started a couple days ago. So, um Can hear you perfect. So, uh, you know, this may change All of this could change a little bit depending on how you know what they change in the For the Kickstarter and with our feedback, but here's, uh Here is a look On the inside of the box there It's a bunch of plastic Which is kind of cool that they not only foamed it, but they wrapped it in plastic just in case i'm assuming Um, you know whether it gets to it or something the other thing is I don't know if you noticed Look how thick this this cardboard is right here I mean it is some really thick thick cardboard So What are we gonna move? I'm gonna slide this over And the first thing we're gonna pull out is our gantry Nice big gantry And then inside It looks like We have a little box of stuff. Let's see it says Uh, this is this looks like filament. Okay. So on both sides, it looks like they give you some filament We'll we'll be surprised. We'll look at color. What color it is later Uh, but there's some filament there. I'm gonna set the filament back here Just to get it out of our way and then Uh, let's see. This is interesting So this says extruders on it, okay and in the box here Just like the other one is our tool heads. So These tool heads are really cool. They come individually boxed um, so you can see Wow that is really blown out. There we go So you can see they tell you what it is. That's the cnc tool head You know, then you have your your dual fdm tool head And and so on. So I like that they're they come individually boxed and been packaged nice. Here's the fdm one and the laser one We'll just stack those right there for now and then A big box of mounting. That's what it says mounting So we'll throw that in the front And this base is huge. Holy moly So I'm gonna I'm gonna show you this here So there is what I see now And that base is is quite large. So I'm actually going to probably See if I can pull it out of this Maybe Oh, it looks like the bottom panel isn't on this one. So So it looks like We may have to put some panels on On the bottom So here's a a big plate here. I'm assuming that's a cnc plate maybe And then I think the the whole bottom of this thing is wide open right now And Move that over and carefully set this down This thing is a monster What was plywood? I didn't see it. Oh, I see Um, so this is the bottom panel All right This will be a fun build then So nothing left inside of the box Just a giant box So this one looks like it has a little more to do than the little guy Little one was really easy and fast to put together um So Yeah, there's our there's our instruction book. Maybe we'll get everything out here. Look Okay, remember what I did with it Maybe I put it underneath that. No, I didn't Oh, it's right here. Good. I did put it underneath that Nice astral printer. That's awesome Okay I saw astral printer. You just did a idex I think The other day Hmm. All right so basically It uh, basically tells us to unwrap everything cut the zip ties all that happy stuff and then Um, there's some mounting we got to do to this thing And it looks like the cables are going to go down into the bottom Interesting I see Yeah, this has a little bit more to do than the little one Um, but I don't think that's I don't think that's a bad thing So let's get everything unpackaged here. It's kind of fun, right? Hey chris. How are you? Here's a back plate Just hanging out chris just hanging out Uh, this thing comes with no back plate on it currently. I don't know if they'll change yet for production or not but Uh, so so yeah the plate comes off. I'm actually going to set it over here till we need it The it comes with a second cnc bed which is a Pretty thick Piece of a metal of some sort I'll have to look into that and see what it really is Uh, let's see this thing. It's what what what we say 350 by 300 by 350 Idex nice Just trying to get everything unwrapped here So it does have a glass built surface for the 3d printing with the kind of that Texture like everybody's using now A lot of plastic a lot of cardboard So, um, hey chris Guess what? We're going we're going fancy today We're going uh, let's see I thought you I thought you would I like this one camera A side camera and a desk camera. Whoo fancy. We're fancy So that This thing is the base and this thing is huge. Let me let me just give you an idea Just to give you an idea It is 21 and a half inches wide By Let's see what we got here by 21 and a half inches by 17 and a half inches As far as the printer goes, it's a huge that's a huge base This thing is big not not ender five plus big, but it's big All right, let's get this on box or unpackaged Of course, there's lots of uh Styrofoam, which is great Zip ties curse. He says he loves it It is a monster of a unit. Yeah, I hope it you know what? I really hope it it performs As good as the first one. I I think Chris would Agree with me the first one does it's actually a really solid little printer And it does some fun stuff The gym cam the first person view that would be funny gary Just what I need Like the the forehead camera because I had my hair pulled back I could get one of those like go pros on my forehead. I could try to do that Actually, um I've been playing so I finally had time to come out into the shop here the studio And uh play Getting some more stuff set up my desk. I'm getting more set up. I got stuff nicely cable managed on the front Um with ports for you know, my cameras and all that fun stuff um And and I'm just slowly one one thing at a time but getting it kind of more and more put together I actually had some drawers that I did. Uh, I printed Some uh with coax. This was a coax Mystery roll that that the base is printed in and this was a green. Which one did I use here? This was also a coax mystery green Um, so, you know, I I've made some little drawers Of course, you got to print them, right? I mean you can't not print them because that's what we do But now I got to get them together. There we go. There we go so little some little drawers that can mount up underneath and Obviously I put that in backwards But yeah, so I get some more little drawers put together and that'll be fun and more and more it's coming together on this thing Uh, let's see 220c top nozzle temp I didn't look at that yet, but I imagine it's mostly for pla. I'm just maybe some petg um Make sure you Keep your drawers on. Yeah. Yeah. I definitely will keep the drawers on that's a good plan Uh, let me see what I got. I need a slippers Gotta get out the trusty blue ones. I won't tell you what manufacturing those came from But I can tell you that these Scheme any Christmas these cable ties much like Everything else look out. Look at how chunky those are man. Those are huge cable ties I mean Interesting Basically it ties them to the uh, it it cable ties them to the foam That way you can't move off that foam Which is cool Anybody else out there watching on facebook land? I'm just curious because today I actually went to my my page on facebook with the edge of tech and i'm going out to my actual personal facebook account as well Never never did that before but I wanted to try it and see what happened All right Oh, there's more zip ties up here There's zip ties everywhere And it looks like I'll get a shot of this in a minute, but it looks like Um, all the cables are actually Individually labeled really nicely too All right, what do we get? Let's stop playing with your cable. Yeah, thanks travis Now i'm disappointed too. Why is that? Why are we disappointed? I don't know. I don't know why we're disappointed We're not even far enough into the build to be disappointed yet What are you guys drinking right now? I got the water because it's uh What 12 20 something on a saturday So i'm drinking the water currently um, but What are you guys drinking? Oh, i'm keeping my drawers on so everybody's disappointed. Hey, I gotta tell you this i'm down About 12 pounds. So i'm working on i'm working on the weight. I'm eating better and all that stuff You can't tell yet. Maybe but I can feel it hugely I mean, I I feel so much better right now and i'm only down 12 only like 50 to go, but i'll get there Mr. Pib for the win I love it. I love it I'm watching from facebook, but my comments did not show up weird So I started watching on youtube if you're watching from facebook and your comments are showing up I apologize. I'm not sure why that would happen, but um Yeah, thank you guys got to keep it going got to keep it going It's it's really easy to do and you stop eating the garbage and start focusing on i'm logging every day what we're eating You know stuff like that. So all right So the first step take out the machine use the scissors cut the zip ties uh Grasp the z-axis slowly take it remove the plastic protective bag and put it on The counter we did that grasp the bottom take it out did that check take out all the accessories did that check Install the z-axis assembly. So I guess we're going to put the gantry on right away Let's do it. So For this I think i'm going to swap over camp i'm going to move some stuff around here So i'm going to i'm going to take this and bring it over here and take this and slide it down I'm going to get it in front of that other camera just so we can Maybe have a better view So much foam so much foam I'm going to put all this stuff over here Because I want to give us some more space here Shane if you are still watching i'm assuming you are I might do a two for one today. You never know what's going to happen I'm sick of I need space I need space. All right, um So let me see what this looks like Hey, look at that not terrible, right? I'm working on it Let's see Come back a little bit I'm working on this new angle stuff, you know this new fangled camera multiple, you know chris chris did some sweet stuff with his and uh now I have to like I have to get with the times, you know There we go. That's a little better. So you can kind of see the screws here and the screws here What do you think? Uh, yeah Yeah, yeah, you need that shirt. I love it I can see the weight loss. Thank you. I appreciate it Um, I don't know what that means Shane lucky duck. Well, we'll see what that Um, we'll see what happens. We'll see what happens. Um, that's funny Dan, you never know You can be next on the rotation. All right Uh, so what it says to do currently is unscrew the eight screws. That's these um That fixed the x axis profile platform and then Insert the z axis assembly from the top and then screw it down. So let me grab my handy dandy, uh Let's see My t handles because I really love t handles here That is just me You never know what they're gonna have see see what happens is I got space or I need space. That's what's happening We'll see I was out here for a couple hours before the stream Getting everything kind of set up So i'm going to take the four out here So what this is and i'm going to show you this in a second Actually with the other camera because I could do that Why not let's see Maybe Hey, I thought you would go further down than that Disappointment All right, we'll do this See this uh right there. So these are t nuts in the extrusion The plate is cut out around that extrusion And we're just taking these out of the t nuts here And then when we put everything down there's going to be a bracket that screws into these four And it looks like two bolts will come up or two screws. Whatever you want to call them We'll come up from the bottom But that's what we're that's what we're looking at. So Yeah, cool. Huh cool Huh sweet Let's see land that yeah, that's funny You know chris you have the funniest uh Tracking issues with your printer sometimes like all of a sudden they're in alaska, then they'll be like in russia I love it. So there's eight of them i'm going to take all eight out You do it This is the edge of tech. Hey jim Dan shane. Hey, how are you doing? So, uh, I don't know if you guys heard me say this earlier, but ethan Or ethan and ethan's dad will be on the show monday on hotnakes. So we'll be releasing that pretty soon here As far as promos go But I think that's awesome I can't wait to talk to him about that sweet app they came up with or they're they're working on I love that But you do it's in the house. Len. How are you astro printer? Hey again. All right So it wants us now to put the gantry on I'm i'm gonna assume that we might have to um We might have to raise the gantry but Uh, you know, I want to assume until I actually drop it on there, but I'm just I'm gonna go out on a limb and say We're gonna have to raise the gantry Jonathan barns five bucks to paypal. Thank you so much sir. I really appreciate that Paypal is awesome because it doesn't take 30% like like youtube does but I appreciate all the donations we get It helps us do some awesome stuff Uh, get some awesome product and do some more videos So thank you guys for all the donations Here it on hot makes everywhere so Next there's a bag hanging from the edge here. Let's see what we got Interesting We'll just put it to the side. So I'm going to set this down Like this and it looks like It doesn't look like what happens here is this sits down like that and those four Bolts that I just took out or screws or whatever you call whatever you want to call I need to go in here Which should be interesting because that means We have to figure out a way to make sure those t-nuts are in the right places So We're gonna uh, we're just we're just gonna do it. We're gonna hope Why not pete robinson? How are you? Let's see and you know what look at this I might have to Hear that or lose the t-handles here. Let's see Now this could be a fun game of fishing To try to catch those There we go. I got one I might have to raise this gantry up so I can use my so you can look down and kind of see where the t-nuts are So there's that Chris later. Thanks for swinging by Chris Thanks for coming by I'm not a huge fan of finger tightening because I'd rather use my t-handle But we're going to get to that part I promise We'll uh, we'll adjust this later to make sure it's straight because I can see that it's not going up completely straight while I'm doing this But that's okay And we'll get your shots all around the printer too um So you can kind of see What everything looks like Cable wise and stuff. I see some cables hidden in channels. I see a A ribbon cable back here Um And again, this could change with production. You never I don't know Production wise what it's going to end up being but Uh, you know so far Not a I mean the build this thing is metal The base plate we saw a little bit ago Was was huge All right I'm gonna have to go around the other side of the table for that probably I'm gonna swing around to this side Cyberdeck cafe is in the house We're gonna be on there, uh Their stream coming up in a couple weeks That'll be awesome So I did not tighten the other side because I want to make sure I can I didn't tighten the other side because I want to make sure I can get to all these, uh All these t-nuts I got to that one Yeah, I use these normally Good on that one What do we got Idex what Let's see. Idex is interchangeable head. See the color dual color laser. Yeah. Well this one This is a four in one. It's not really an Idex So Idex I think we're talking would have two two individual heads, right? Come on catch All right There we go So I believe we caught all the t-nuts what we're going to do is screw these down and Make sure we're all tight here Ken C is looking for something under a thousand bucks Uh flash forge creator pro max interesting See if I can get these tightened down without having to uh use the little one that came with it probably Yeah, we're gonna be on uh Cyberdeck cafe here in a couple weeks. I can't wait for that. That's gonna be a lot of fun it's like a virtual con uh and and You know having to have a little fun with those guys But joe and crew, uh, I'm assuming blasto will be there And uh, hopefully you guys all come it's are gonna be a lot of fun one day I think it's the later in the month. I think it's the two weekends from now. Maybe No Gotta go back. All right Walk it around. So That one doesn't like it. So I might have to adjust the t-not in that one Yep Okay Just trying to knock this out quick so we can get to the next steps here, but Not paying attention to chat too much 27th little Oh, yeah, 27. That's what I thought. Okay It's gonna be a lot of fun A lot of great, uh makers will be there SPC 3d. How are you? You know, how are you? I might have to get a different allen wrench for that one Little tight little tight But i'm sure they sent one in their giant box of stuffs They did We'll go through all of this in a little bit. I just was curious Because we'll need that Probably need that Some sweet stuff there Okay, okay, woohoo. Here we go. This is what I was looking for so I found this bag and it has a whole Thing of allen wrenches. It's it's called the tool kit bag each bag is individually labeled So that's awesome and they give us, uh, you know a set like this So that's kind of cool An individual one here and a little phillips screwdriver as well so That that's pretty sweet that you get, uh, a little a full allen set Now I can come in here My fingers won't allow me to And tighten that one in or if it's being a pain don't tighten it in Just joking We're gonna leave that one for now because you know, it's just one. I'll come back to it This isn't a bad little allen wrench set and it comes with some monster ones, you know If you have a printer that needs some of those that's going to be a big printer Nice nice toolkit though for for that The next thing it says is we want to drop the cables down through the holes in the printer itself, so Let me just Spin this bad boy around So on the back here Let's see what I can do here Look at that There's a hole And there's a bunch of cables in a bag That I'm assuming I'll go down through said holes Um, there's their Cable tied so we'll cut the little zip tie here Be careful. You don't cut the cables That would be bad Oh, there's two zip ties Here's another one, uh, right there, okay so this No, let's see if you can see This is a bundle of cables uh each one individually Let's see if I can get to zoom There we go each one, uh individually labeled like that And it says Drop the cables down through the holes So that's what we're gonna do. That is a lot of cables. So here's that ribbon cable. I was talking about Um, I don't want to put that in there twisted That's an interesting I don't want to put so i'm gonna untwist that I'm gonna come down Yep, I don't think there's a way to get it in. Oh, there we go. Perfect So then We have all these other ones here I'm just gonna do them one by one. Uh, so they fit a little easier So it looks like we're gonna wire the board ourselves On this So While I don't mind doing that. I'm not sure Someone that's brand new would quite Get there, but We'll find out how hard it is when we flip this thing over and see what the bottom looks like Because we know we're gonna have to turn it over. So we'll see what power supply they got what boards in here All the fun stuff so What's the other interesting thing in my model in this pre-production model Is that not everything is run through the cable management as you can see right here That's not run through You know, it's not cable wrap. It's not cable tied So again, could just be a pre-production thing Um while we're here this says Let's see if I can get it to zoom Come on z1 motor there So while we're here, I'm just gonna plug this motor in Because it's going uh right here Maybe What am I doing? Oh, I'm upside down, of course So it's gonna go in like that. I am gonna push the rest of that one down through. Why not? I mean But it is nice that each each wire so far has been individually um Individually labeled. So I really like that. So we're gonna go to the other side now Right over here. So I've not been watching chat. Sorry about that. Uh Nice Never use the laser or drill on nice Too much fun. So I'm gonna come on over here. It doesn't look like there's nearly as much to push down on this side The other side must house most of the stuff But in this one we have Uh, just a couple a couple of things here So I'm gonna pull that one back. I'm gonna push this down through And again, they did a really good job of labeling every cable so far. I mean I That is a big thing even You know, I think it's important to do that I Especially for people who are new and Never seen a printer or never played with a printer would be very important. Sorry about my hand there I'll push this one in too And then I'm gonna push the rest of that cable Down in there So we're looking at the back There we go. This is the back of the printer What do we got next here? Looks like we're gonna Turn this thing somehow And there we're gonna put the four I don't know how we're gonna lay this thing down though So let me go back to here. So the next thing it wants me to do is Go underneath it and put These four volts in through the bottom of the extrusions into the you know into the rails here, but I'm looking at this going where am I gonna how am I gonna flip this thing over? It it protrudes here. It protrudes there Ten dollars to pay pal Thank you so much Thank you so much, uh bill. I appreciate that Yeah, so far it seems nice again pre-production. It could change a little bit But so far so good. So what I'm gonna do probably is tip this thing somehow and Rest it on some of that foam So it doesn't lay all the way down I think that's what I'm gonna try to do now Yeah, I definitely I'm a little bit concerned about laying this down because there's just so much. I don't want to set it on um Jerry, how are you? So I'm gonna grab a couple pieces of this foam and let's see what we can do Maybe like that Maybe like that Move this around Gee many Christmas This thing is a monster I might even have to go higher Yeah, I'm gonna have to go higher. All right. Give me a second Well, we'll get a good shot, but I want to make sure I'm not crushing anything when I'm laying this down Good old toolbox here See what happens Not that I necessarily like that either because we're putting pressure on this gantry Interesting for now I'm gonna do this, but when I tighten this in I'm actually gonna let it go back so That's what we're looking at. So right now so it looks like a Hunt key. I don't know what that is. So a hunt key power supply here And I'll get a close-up of the board here in a second Let me just get this thing tightened in so I don't have to worry about the gantry anymore Where did I put my So I'm gonna get these started and then I'm actually gonna Pull it off that box To So I just want to you know, again, I want to get it off that gantry as fast as I can So I'm gonna get these started but not tight Hang over the edge of the table. I would love to the problem is There is stuff all the way around this box That it wouldn't be flush anywhere to lay it down. So what I mean by that is in the front the The 3d print bed or the bed itself hangs forward on the sides. It protrudes out the side and on the Back there's ports as well. So now what I'm going to do is I'm going to pull it up off that So it's loose And then I'm going to tighten these in Now just make sure they're good and tight and the the ones we put on the front where l brackets Theoretically They uh, no, they are metal. So they're they're steel Or metal l brackets. So theoretically that should hold this thing square If those brackets are square Run the z all the way to the top and lay it on its side. I could maybe Um There isn't a lot On that side so I could try we could try to do that Let's see what I got here so I'm going to give that a shot. Why not here? So we'll run it all the way to the top I think the only side we could possibly lay it on is the one closest to me Because this side protrudes out Hey, we're not uh plugged in yet, right? I can see that There we go So let's try it. Let's Put it on its side closest to me Push it over the table a little bit Let's see how that goes Hmm So I did notice something cool too on the I'll show you a little bit later But it looks like the motors Are connected to a plate The the z motors that have slots that can allow the motor to go back and forth and align itself I like that Okay, what do we got This is the only way it could go There we go This thing's a beast Let's see what I got here. I could fix that so We'll go to that when we're uh, we're gonna get ready to play in the bottom here and then we can actually Adjust that camera Here we go That's a little better. And then when we play with that when we plug everything in I'll pull it in So we can actually get a closer view of that board But it looks like an ecube maker board. Let's see. I got stuff everywhere Too much boxes So yeah, it's an ecube It's an ecube maker board. So it is their own board Um So that's cool. That's cool. Yeah, all right So let me get this out of the way How are we doing out there? Sorry I haven't been watching chats too much trying to get this done You need that heft for the cnc. I yeah Good job. Good job Ramps one four I want the look So what do they want us to do next here? Of course While we have it flipped over to tighten it in they want us to put the spool holders on the top I think we're gonna come back to that Um I think we're gonna come back to that. I think we're gonna come back to that We're gonna come back to that Okay, since this thing is upside down already. We're gonna go straight to The wiring diagram So let me show you what they're doing here They give us a two two pages And if I get it close enough You can kind of see They give us two pages of instructions on how to wire this bad boy up So we're gonna do that Let's just see where this camera shot is here to Something like that And then when we go here, I'm actually gonna bring that in a little bit for you guys All the cool kids here here, right? So Just like that I think I'm gonna Turn off my focus. There we go Okay, how's that shot look look good Hope so Maybe We'll see if my hands get in the way too much So I am officially facing away from my chat But I'll pretend I'm not all right So we brought all of this stuff down in And you can't see this because I um I zoomed us, but All of this stuff is in here Let me let me do this and show you what I'm looking at There we go. So all this stuff is what we brought down So we need to connect all of this stuff back to the board and I'm just gonna unwind it a little bit make sure it's all straight and not tangled up And we're gonna do that Quick while he's not looking. Yes, good idea Lama's here. How you how you doing llama? Okay, so Looking at the board And it looks like it looks like the board here It looks like the board here is labeled as well. So that's a good thing um Now we just got to find everything right So there's there's filament sensors There's motors All that fun stuff and we got to wire it all um One thing I can tell you is not here I don't see any hot glue No no hot glue on this one um So let's do this So uh filament sensor 2 Which goes here looks like this one Looks like that goes uh right there Okay filament Sensor 1 Which came from the other cable set Looks like it goes up in here Hopefully we can see that Is that shot okay? Let me know if that shot's okay. Hopefully hopefully it's decent. We got up in there um E2 motor which is this one here that should go in the bottom Right here The bottom left on my side here great So i'm gonna get that out of the way Now we have uh e1 motor which goes next to it It's kind of hard to see now with all these cables in the way, but it goes In this one here So this is kind of fun. You know, I don't get to do this very often So that's a lot of fun sometimes. All right X motor Let's see x motor is going to go way down over here In the bottom corner Way way over here Like that and what do we got x limit switch That is going to go in the top right here Like that check and then the tool head cable itself Looks like it goes Right up in here like that check So I officially think all of them are plugged in now if The ocd me is saying that I should probably clean this all up And zip tie it nicely and all that but you know Good idea. Oh, you don't want me to touch you with the ring. Come on That's no fun. So it looks like we got everything plugged in Check check check check LCD is up there and while we're down here Which it says we could put the bottom of the board back on You know, we probably should power it up to make sure it works first, but We're gonna go for it so Yeah, it says, uh, well, this is like one of the last steps I'm gonna go back to the other ones we skipped because I had this upside down. What's the point of doing it twice, right? um But my thought is why don't we put the the bottom of the board back on And we're gonna we're gonna bank on everything's connected, right? We're gonna bank on that. It works again It's a hunt key I don't know what that is a hunt key power supply It's an ecu maker board um Yeah Everything plugged in really nice. What I liked is it was all labeled. It was all nicely diagrammed for whoever's building it and now We're gonna put it together. Everybody's like you don't want to do that uh, you're right Don't get don't get the ring caught that would that would hurt Okay Let's see. There's those parts. There's those parts Here we go. Here's the rubber feet Got the good old rubber feet with the screws And it has four that we're gonna hold on the bottom with Man, we've been rocking. I've been here for an hour already. This thing takes a minute to build now Again, if I wasn't talking I'd probably been done in a half hour or something, but You know, we're talking Thank you guys so much for the donations. Hopefully I didn't miss any up top. Um While I wasn't looking But I hope I didn't. All right planks We got this giant plate that that goes on the bottom there Which is cool. Let me see what I can do here I go back here and I zoom this out. There we go We can show it that way Uh, you know before I do that let's just check the power supply See if there's a switch on it You know that old chestnut No switch that I see So I don't see any switches on the power supply at all unless it comes from the top um So we won't worry about that Let's see This looks like it's going to go on like this with four And it does have a pass through here. Um, I bet you if we turn it the right way Yes, so if we turn it that way the pass through gets us up to those bolts we put in for the gantry as well So that's awesome I'm going to go back to my trusty t-handle Longest rivet cable It's a bit of a show and tell kind of yeah Definitely is I'm showing you a printer and telling you what I'm doing Okay, hopefully my head isn't In the way I'm not tightening these yet. I'm just getting them all in there about time for some more water So this this is kind of interesting that there's only four that holds this on it's kind of good because you're not putting you know 20 20 volts in but But it also is interesting because it's only four Makes it pretty easy to get out But what i'm already seeing is that there's a bow See if it goes away when I tighten it, but I'm hoping that goes away when I tighten it Okay, good. So there was a bow right here But it went away when I got those tight in I just wanted to make sure otherwise that would be interesting to have this thing like touching the You know Hanging down or something touching the table all right It appears That our panel's on Yeah, we definitely could get vibrating. Yes And we don't like vibrating right we don't want vibrating So we we wired the board we put the back panel on Now we're going to set this thing back up off of its side and turn it some way Probably turn it this way because it's a bunch of wiring we got to do up top now I want to make sure you guys can see that Here look at this I might have to loosen I I'm going to check this on another table, but It might be it might just be this this table But it looked like it had a little wobble there wobble baby wobble baby All right, let's go back a couple steps that I skipped Good we put those on now wants us to install the filament holders um It's the filament holders That must be over here That must be what's in this giant box here. It's very very taped giant box pooch table I hope not Holy mother mercy. All right then these things are Huge uh, interesting the ptfe has colored tape on it Which is cool Little colored tape slide that back Now these these holders go on top it looks like um and they are They're taped up good How's it going out there? I apologize. I haven't been watching the chance 100 percent just trying to build and and do everything at once but Dual extruder. No, it's a single extruder but One of the extruders can do dual filament So it has a single filament Uh head tool head it has a dual filament tool head And then it also has a laser and a cnc But I gotta tell you Holy So the extruders I gotta show you this. Give me a second. Let me get this other one out This why these are so big is because they built the extruders right into the Um filament holders here with the filament run out on them With the filament run out. So let me uh Interesting Interesting interesting. Okay, here's to some water so Let me let me do this That is oh There we go I'm gonna turn this a little bit get this stuff out of the way Go back to here So this is our our spool holder. Okay And and that is what they did Kind of hard to see because it's all black but um what they did was They built a run out sensor And then your extruder which is right here I'm sorry your stepper motors right here go through the extruder right here and so That is interesting. That's I've never seen it done like that. That's kind of cool Um, what do you guys think of that? Yeah, it's it's definitely I don't think it'll be cheap when it comes out. I don't remember I think it's around 600 bucks currently if you can get it uh now I think it's around 600 but so it looks like your filament comes in here Through the extruder and then out through the ptfe tubing that's going to go into this one But it's all built in you see that And it's built into both of these and so if we turn this around and look It says e2 extruder this and there's another one that says e1 extruder. So everything is labeled Really nicely Really nicely And it looks like my little guy just went to sleep Taking a little nap So I got this on the back. Um Let me go back to here And this is going to be a hard one to show Maybe I can bring another camera over here. Um, but it looks like what we need to do is mount these Up onto the top of the machine Interesting So how do they have them looks like they have them, uh Mounts to the back of the machine One and two Got it So it looks like there could be already there is so Um Something else that they did already ahead of time is they put just like they did in the bottom part there They put the bolts and the t-nuts in here for you. So you know where to mount them So that's that's cool. That's You know, that's that's cool. I like that There's a lot of prep that goes in that, you know, it seems like there's a lot of prep that went into ahead of time um To getting these ready. So and and here there's e1 and e2. So you know, which one to put them in So i'm gonna see if I can turn this Let's see if I can get a good shot of that And We'll see what happens here. Let's see the best way to do this. I'm gonna move it Why not we could do whatever we want, right? Yeah How high can I go? Oh, yeah How's that look and get this back in here There we go What do you think about that? So i'm gonna put the spool holders right there and how they go on we're gonna find the number one I'm gonna take the bolts out here Which will loosen these t-nuts up So thank you, uh, whoever's dropping. I thought I think someone was talking price If you guys are jumping in that Kickstarter looking at the prices. Thank you for throwing those out there. I Don't remember all of them Um that they were I think presently 350 on kick Kickstarter with a single fdm head 399 with the fdm in a laser or 600 for all four okay I mean, I'm not gonna lie I have not used this yet. I can't say to buy it or don't buy it or anything like that but so far quality wise I mean 600 bucks If this thing 3d prints nicely like the first one did um 600 bucks for a 300 by 350 by 350 Um printer and then you add those other heads on it That's not terrible. Not terrible at all Okay So it appears that they're gonna sit on like this Okay So that means I got to go in and see if I can rearrange the the good old T nuts So we all fit Do you always want to make sure? Do you always want to make sure your nuts are lined up? Loyal moses 24 99 Good morning, sir. Good morning Well, that's another one. I can't wait for I'm super pumped for that mini to get here Here that or it went to someone named jump in in Illinois. I'm not sure But we'll find out soon Interesting So the the hard part about this Would be uh, you know holding it all and Putting it together But or you know when you drop stuff My wife if she's watching she's probably lying I mean uh laughing is what she's probably doing because because every time I do a project I drop I drop stuff That's what I do Just dropping it dropping it like it's hot and then We got to hope we catch the t-nuts, right? There we go. Yeah, I think I've definitely dropped stuff a lot Someone said drop stuff like Linus. That's that's funny Yeah, come on There we go So I got those first two started And tight Always need extra screws. Yes Yes, yes, yes You always want to make sure your t-nuts are lined up correctly because If they're not You won't get tight, but you'll uh, you'll strip them out That would be not cool There we go All right one down one to go This thing is going to take up some space definitely So on this next one Um, I'm going to put it as far over as I can That you know as far as it allows me over to this way That way we separate it a little bit. Actually, you know what? Bulls right here. We could put it as close as we want probably Let's see That might be a little better for everybody So the second one Um Excuse me the second one sits on there like this Right next to the first one And we just got to line up our our our nuts here It's always good to get your nuts lined up like we talked about earlier pretty close Now I'll get one ready I didn't uh, let's see. What does it say? What do you think of? Filament one's a glint PLA. I've not used it yet So I can't honestly say I think anything of it um I know a lot of people use it I've heard a lot of people using it But I have not used it All right one down three more to go if I can uh See if I can Do this without dropping anything, right? Let's get this slid over Hopefully we caught it We did nice I'm leaving it a little loose in case I have to slide it Take a magnet to the end of the hedge pecs wrench. Yeah, I think I would still drop them. I I'm not even joking I am parable with that Somehow I would still drop them Cool One more to go one more to go Glint is fantastic Moses Moses has spoken Now I'm gonna have to try it. What's the new slicer? Everyone's talking about Um, oh, you know, I are you talking about the resin slicer or Which one? I can't see the screw There we go Somewhere out there knows the answer Stephen, how are you? Just getting these Last couple bolts done. Here we go All right, holy moly fdm Good question um So now what I'm gonna do is I'm just gonna plug in the cabling. So here's a run out sensor cable. That's right there and the motor Cable that goes right there And that'll go to both of them and they're very well labeled again. We talked about this um On everything else so far. This this has been a very well labeled machine. I I really appreciate that because Sometimes when you get a new new machine, uh, it's just you know, you don't know where any stuff goes and and stuff's not labeled That can throw you off. So There's that. All right The next thing we want to do is install a Purge tray Woo a purge tray Where are we going on this side? It looks like Let me turn this beast around. I mean this thing is look at this thing This thing's huge The machine itself is just it's huge Um, it looks like we're gonna do a purge tray over here So I'm gonna get this out of the way um See if I can get you a a better View of the purge tray the purge tray Is in here and there's there's a protective coating on this bed in case anyone's Screaming at me not to set stuff on it There is a protective coating there purge tray Holy moly. This is a great build. I really I'm really enjoying this build Anybody else? Let me know in the chat. What do you guys think of the build so far? I mean, I don't think it's um Unreasonable. I think it's Pretty reasonable actually So we're gonna do a purge tray Right about there Let me just do this somewhere right about there It's kind of hard to see isn't it? All right That is not in focus There we go. So we're gonna do a purge tray right there Let's see what your comments are saying. I'm just watching you uh Yeah, I wish one rise. This is a monster. I don't think I'll be sending it anywhere. Um Wish I was there to help build's looking great Hell of a lot easier than a And then the tronxy. Yeah, ain't man on that Uh, I've seen I've seen I don't have one but I've seen a couple play with those and It doesn't seem fun. All right So we're gonna drop the uh the good old purge tray onto the side and it's gonna go right there So This is this is pretty cool Um when it does dual filament a dual color printing it'll actually pop over here And wipe the nozzle on this little purge tray And then the extra filament will just slide right off that tray How do we enter to win this printer? Um, you don't Not this one This one's uh, they just started a Kickstarter a couple days ago They shot it over to me. I think narisse did a video on wednesday. He did a live stream on wednesday building it. Um Let me know in the comments if you if you watch that one too But I didn't catch moat much of that one because Uh, I was working and too busy to catch much of it, but I usually watch a lot of his live streams So the the next thing we need to do is Cameras in the way Get this out of the way I like having uh movable Stuff it's kind of fun I should just build an arm though. I can be like right here, you know So the next thing I'm going to do is just plug this into the back of the machine Uh, it literally is kind of like a cr10 where You just push it in and screw the connector in So i'm not going to uh turn in the printer around to show you for that one, but You get the idea next um the two z's we already did Next installing the Cables for our extruders up top here. We already did Let me turn this back towards you guys And look at this thing Thing is huge Um got that in there Then it wanted us to wire the board. We already did that Cut the yellow zip tie off of here. We did that as well Looks like we got linear rail there Remove the y-axis Uh fixing block There's a yx. Oh right here So there's a little uh in the back There's a little block that was pushed over the belt It is 3d printed it looks like but it was pushed over the belt probably so The bed doesn't move that was kind of cool. That's cool idea there um Okay, okay, okay unpacking complete All right, so Oh, I see so this is the tool head plug They have it in here so the plugs here and they just have it wrapped with that uh Boom there all right I think we officially uh got it built So that's cool. I think um, I have no idea what's on this card but I think we'll do a Dual color print just to put it in and see what happens. You know why not? um We're gonna go through mounting a tool head in a second here And I'm gonna do I'm gonna push our ptfe tubing in the front So this will just connect up in here So that's uh red there and Blue there There you go Thank you so Let's find the tool head we want I think we'll do dual color 3d printing today. Let's burn something on wood. I love it Oh I'm really curious this this is the part i'm really curious about because if this tool head is dialed in nicely from the factory It should print You know great with the the print they gave us so here's um Just some packing i'm gonna leave it in that box because i'll probably store the tool heads in this box in the boxes they came in Um, but what i'm gonna do is turn this we're gonna get a good shot of how this thing connects We're gonna connect it all up real quick If I can step around the box I laid on the floor Get this over here Just trying to get you guys a better shot so Whoa, let's not keep the tripod, huh? There we go. Oh boy Now I did it There we go. Can you guys still hear me? I think you can check Good, so I definitely I accidentally unplugged the camera when I was moving it, you know that old chestnut weird Yeah, it doesn't want to go back to that one. So We're gonna let it fly Camera two is working. Let's see Nope, it's not But I can probably No, we're definitely still stuck, huh? Yeah, that's okay. We'll just stick with this one. I'm not worried about it Mostly because I don't want to waste the time to fix it. So I accidentally unplugged it while I was Adjusting it and then it then it didn't go up. But what I'm gonna do I'm gonna give you a better shot anyway one way or another we'll give you a good shot. So there's a screw up here. We'll Just do this and loosen This one still works So I loosen that screw right there Okay Then you take your If I could show it. This is the head here It's two in on the top one out on the bottom there and that slides in No, you do have to take that out. So I guess you do have to take this all the way out Should have remembered that from the first one There we go So then you take your your head and it slides over this right here All the way down so it sits like this Then you take your screw and you put it into the top And it holds the head down So it doesn't move there So you can see that screw Right here That holds everything in check check so then We grab our ptfe here. I'm going to go red on this side Push it all the way in I'm going to go blue on this side all the way in there so now we have Our tool head set up here. All right Hey, how are you? How are you? okay Check and check Now we're going to grab the filament and we're going to go through that. We still haven't fired this bad boy up We probably should do that, huh? So filament Let's see what they gave us here What time we got holy moly it 136 108 people watching you guys are awesome Bernie Sanders, that's funny there Oh, man You need to plug the tool head cable and I will we get to that part. Thank you So looks like we got blue and green this time Someone said plug your tool head cable and that is this one right here and that just plugs in behind these Just like that Cool So we got a bright green and A blue last time it was blue and yellow for the brewers this time it's not this is All the above andrew I'm not sure what release this is officially. I don't know what they're going to do to change it going forward They didn't tell me what release stage it's in I can reach out and ask them And then update you guys on monday on hot makes if you want, but um But they did not tell me yet. What stage this is in So those two will sit like this. I'm gonna Oh our camera, darn it camera. Let me just see something where's my mouse? Where's my mouse? I can Well, we're still seeing that picture so Here I got an idea. We're just gonna do this one one again That's still stuck. That's so crazy because I see it in my other my other program here Um I see it over there, which is weird Okay, doesn't matter. We're gonna rock and roll. So what I wanted to show you is that one I'm gonna flip this around so you can see better And cut that's right and cut too much messing around what happens when you accidentally hit a cable so Real quick filament is here it's gonna come out and go into The filament runout sensor here Through the extruder and then down to the hot end. So that's what I'm gonna do now is I'm gonna run the filament into these um runout sensors here and That's we're gonna do cool cool I like it. What do you guys think so far? I know this is uh interesting I got a any broke it. Yeah. Yeah I definitely I definitely broke it. It's frozen Where did I put that snips? There it is So I'm gonna use green first naturally. We'll cut it at our angle Put it up there. This thing is tall I'll give you a dimension in a second here So I'm gonna push this all the way through Because I want to make sure it's all the way to the end of that To that head. I know it's not heated up yet but I don't want it to Be too far out That's a lot of ptfe tube All right. I felt it hit the end. There we go. Check check on number one Check check check always hold the end of your filament by the way Elegyu neptune 2 I it showed up here yesterday and I can't find any info on it uh Was sent direct me from elegyu. Hey, you know what? I got one yesterday too Um, and I think my friend garret over at 3d print farm got one yesterday too and he already built his I think it's a pre-release Uh, they have not released it yet. Obviously, it's you know Not out there anywhere in the wild Um, I don't know anything about it. I know I I didn't ask elegyu for it and they didn't ask me If I wanted it, they just sent it which is awesome But I don't know who they sent it to why they sent it to us Or anything like that So i'm just getting this pushed all the way through like I did the other one To the end Check and check I'm gonna put my Tools away here like that We are gonna spin this back around. Holy crap Oh Actually, no, I'm gonna go this way My power's over on this side. So I'm gonna go over here with this like that Okay So the next step after loading your filament it says um There we go filament had correct position Okay It'll get jammed if you don't uh, you need to place the filament in the position Oh, so it wants me to pull it back out a little bit From the end Apparently One centimeter it says So we'll go with that The good old one centimeter There we go check Now it wants me to remove the transparent film Uh From the plate here precaution Using precautions for using the platform adjustment It's used to adjust the flatness of the engraving platform during c and c engraving you cannot Uh, you cannot use the adjustment of the platform during 3d printing or dual color 3d printing So that's interesting. You don't use the the wheels under here for that In 3d printing the platform adjustment knob can't be turned Because it has automatic leveling function if the height of the platform is adjusted by the knob It'll cause a deviation offset value and The distance of the nozzle of the first layer and print will be too high or too low Uh in 3d printing to do a color if the adjustment knob has been turned Be sure to execute the auto set offset option to save it correctly Also in printing and dual color printing the first layer cannot be adhered Please use the auto set offset option and save it so a lot of good information there Let's pull this bad boy up So again, it has the the standard base that we're seeing on pretty much everything these days That is super sticky Little water cheers to everybody. Thank you guys for watching We're gonna get something printed though. Something's gotta print So what do we got next peel it? Who plug it in? Here we go Now we see if we if we wired everything underneath right, right? um Yeah, so I know early uh Some early stuff on that lugu printer is it had a lot of assembly much like original ender 3 I think the price point on that thing is going to be around 182 180 us is what i'm trying to say, but we'll see I don't know much about it. It just showed up I also Just got an ender 3 max which is right over here So we'll play with that. Maybe we'll do that next weekend or someday this week. I'm not sure yet I want to get that thing going That'll be a nice big surface like this one actually. All right, so I got it plugged in uh I am going to See if I can move this little guy Turn this I just want to show you guys the screen when it comes on So we'll see how that looks when it actually comes on but um Here we go. Let's pray for no smoke, right? Here we go. Well, we have power Immediately I don't see any smoke which is great Let's see what we see here nothing because it's too bright Here we go so um I'm going to see if I can uh I don't know the best way to show you Maybe I can hold it Maybe There we go So it looks like f dm So we're actually going to change this we're going to make sure it's on the dual um Let's see We're going to change the tool head. We're going to make sure it's on the dual Tool head. Okay, so it is changed to f dm laser cnc So it looks like there's only one f dm which is awesome We'll go back We're going to go filament Let's do a preheat. Why not? Oh, look at that. So that's interesting when I stopped it. It actually shut it off Hmm Can we heat everything? We can't heat everything so I want to uh heat this up to clean the bed So you can't heat up. You see that? Oh, you can't see that. Hang on. Sorry guys It gave me two options. I can heat up the head or the heat bed. That's it So let's heat up the heat bed first Just so I can clean it off before we start a print all right David, how you doing man autocorrect is killer here Okay, so While that's heating up I want to heat that up. I want to get just get it cleaned off before we start a print And then we're going to go for it. We're just going to hit print and see what happens That sounds good While that's doing that They did give us a usb cable, which is great Um, we got all this stuff to hold down your cnc We got laser glasses And then we got a mounting tool kit it says Mountings and toolkit Watching more snow tonight. Oh boy. We just got a bunch and then we got a bunch on uh I don't even know what day was thursday night And then it got super cold. It's like I don't even know what temperature. I think the high today was supposed to be Really low like zero or something. I know tomorrow. It's like five Oh, it's seven degrees right now seven um So there's that It looks like there's some cables maybe some extras hopefully I don't see anything else. I need to plug in so there's that We got zip ties extra zip ties we have Uh, I really like they sent extra couplers Extra little pieces of ptfe tube that are that looks like they're cut. Um Just little guys like that. I'm not sure why we'll have to look that up We have An extra a little screw hold down for the tool heads Gonna have to read some instructions because a little board Just a little board like that We have a four gig sd card like this And a card reader. So It's an actual full-size sd card Yeah, I hear you with the laser glasses I got uh It's over there. I bought a really nice set A couple really nice sets for when people want to watch too, but I bought it um that fit over my glasses and then I don't use the ones usually that come with the kit just because you never know Just be careful if you're gonna Uh, oh, I wish I was in Arizona right now. Amen. So I'm gonna go around and put this sd card in The heatbed is getting warm, which is great sd card officially inserted Little isopropyl. Oh, don't worry about the isopropyl. You can find it now And I found a pretty good deal on amazon So that's awesome Yeah, uh California nice I'm just gonna shoot this bed down Little isopropyl And then we'll see how yellow it comes out because they always do Nice and yellow. You can see it from here The yellow on that Just want to make sure we're good That was even worse. Okay. This was the second wipe. It was the second wipe So always clean your beds before you use them There's a glut of IPA. Yes, that is a true story. There's a bunch Why is it yellow because of that's a great question? I don't know the official answer But my my answer is always because of how they manufacture it and the coatings and all that stuff But somebody knows the real answer go for it. Throw it out there It doesn't smell or taste like lemons. No, I don't think so So The heat the hotbed is good So let's let's print from sd. Let's see what they're out there. That's a dual 3d printing There's cnc carving 3d printing. Let's just do it dual 3d printing. Here we go. Yeah, it sounds like that work It still doesn't go interesting So I'm just checking out the uh, this side where it was hidden here And I see what's going on here There is a On this side right here There's this L bracket And I don't know why it's there to be honest with you I think it's supposed to hold this stuff together, which is great But He is preventing that from going all the way. So I'm just going to check the instructions. Maybe We're supposed to take it off. I'm not sure. Let's look Just to make sure No not yet not yet Not yet not yet Actually shows it on that picture It shows it here That's a z-axis collision block Interesting. I wonder if we're just too we're just too tall here. I bet you that's what's going on. We went a little high I'm okay with that We learned right I'm gonna actually bring this thing down And just make sure it's it's level two. I didn't do that yet That was my fault. I think we I had it too high when I raised that up It definitely had it too high It's not doing its job. Well, it will be hopefully it will be soon here real quick I'm just gonna make sure we're 95 Of course, I can't see it over here. We were close Bam that should be straight. Hopefully now I just wanted to make sure our gantry straight. Okay Let's try that again without colliding Right. All right print from 3d dual color printing Hey, hey, we made it So it's going up for some reason. Oh, I see So this What I messed with here this one That's actually gonna tell the tool head Like the other one had that too, but not quite in the same but nice So that's gonna go up I don't know if you remember the first one we did but it went up and then it presses this button down right here It's not not the fastest thing But that's okay I look totally different. Yeah my hair So I was out here this morning working and working on the table here Getting bunch of stuff cable managed underneath getting the camera set up um stuff like that and then um I went inside and made lunch hung out with Lindsay and the baby for a few and And I was like, all right, I gotta go. I'm just gonna throw my hair up today. Why not? It's a little slow Well, you're gonna find out now one thing I did notice If you remember the very first one I have it over here the book very first one had Uh an offset number Written right here on the book So that was written on the book of the very first one this one. I didn't see that I didn't see that yet So it looks like it did its thing It's coming back down I don't think it's heating up yet, which is interesting I'm looking here I don't see any of the offsets Yeah, so but there it looks like there's an autos the offset button So we'll have to look at that Yep You're talking about this Yeah, I think all that does is literally there's a little switch I'll grab it I get a lot of noise right now And it's uh auto leveling Or something I don't know what it's doing. Uh-oh So I don't know what it's doing right now. It's doing some crazy stuff But we're going to pretend that it's doing something. I don't know. All right, so it goes up This is the one of the the printheads maybe That's what it looks like. This is the laser head So it goes up in the top there and it just presses this down like that And and then when it hones it pops it up like that so Uh interesting You know how that works And when it pops it down like this It actually puts out the probe right here Um, I believe that's for your for the leveling for the leveling there. So currently it's Doing something Probe reset error it says Uh-oh You better check that out Reset error So we were just talking about the We were just talking about those probes And it says there's a probe reset error currently I didn't see what you said Too fast too fast Ah, good one. I got you. I see what moses said now Um So let's see what happens here again So an auto home to there Now it's got to go up and hit this button here And it takes a minute to get there. We'll call it a minute. I saw that. Yeah So I wonder if It's very possible that um Maybe one of the wires They have the wires swapped in the harness maybe Because we plugged them in there's only one way you plug them in so We're gonna find out We'll see what it does again. That was weird though that it was going up right instead of down It might be one of those things because it's a beta or a pre-release. I might have to dig into You know and figure it out off off camera and then come back and and update everybody or do another stream printing or something We'll see what happens first It's really it's just one one cable here that runs You know in and then it runs down So it did its thing the the probe popped out right here It's doing some crazy stuff is what it's doing interesting So that time as you saw It went all the way up and instead of like coming back down It just hung out up there and ran into that edge so I don't think Let's see. I think if we home it again, it's just going to keep running into this edge I'm willing to bet Let's just see what happens. I don't think there's a way to actually just tell it to go home. Oh wait auto home So what's interesting is it doesn't seem to know that it's up all the way like that You know what I mean I mean because this this pin here Is up so if I push that down it might clear it Maybe Let's see what happens Yeah, I think it's up too high But we'll pop it up See even if I pop that up a hair. It's going to clip the cables here. We don't want that either so It's it's got a home lower than this So I'll probably pop the bottom back open Make sure everything's in again. I mean I followed the wiring diagram, but hey, you never know And Keep playing with this, uh Until I can figure it out and then I'll have to Okay, so that homed when I lowered it So now it comes back across It goes up to hit the top It might be reverse stepper motors, but if they were reversed You know, it would be weird because it wouldn't hit this So it pushes that little pin down I mean, so these are going up and down And it appears to be moving right because it homes that way. I see the the End stop there. I definitely agree cyberdeck Right so that worked So that actually worked there It worked that time it actually homed in the center That was cool So I wonder now So that just homed sideways and backwards And now it's got to come all the way up to pop that little tool head in this piece So I'm wondering if it's actually the print Because that time it actually homed okay I did so I pulled this back down a little bit So it would hit, uh, you know a little lower Pre-production. Yeah The benefit and the downfall of a live stream with a pre-production unit, but I tell you Um Once the kinks are worked out It's got linear rails dual z Four different heads if you want all the different tool heads Um I mean it's built like a tank. It's heavy. It's huge So let's just see so floor Remember i'm using little rolls of filament to here, but floor to top we're looking at 32 and a half inches So there's that All right moment of truth here Moment of truth Okay, so it pushed it. That's good right Maybe it thinks there's a different tool head. I I don't know what's cool about this and I I showed it in the first one The little one is that the firmware is actually all control you you go in you say I want this tool head and the firmware Completely changes what everything does. It's really cool But this is where we're going to see moment of truth, right? So it needs to come down. It didn't do this before I did it the very first time but not after that Sweet looking setup. Thank you We're going to see what happens So I just heard it So it touched uh like it's doing the bed leveling It just popped that out I don't know what it's doing now. I don't know why we'll be going all the way back up to the top, but hey You you never know You confused it. Yeah It's in an endless loop. We'll find out that would be that would be hilarious So the bed is not heating Uh It doesn't appear that anything's heating yet But maybe it just has to go through this. I don't know we're going to find out in a second And again free production. So they could be updating firmware Um, it could just be a firmware thing. It could be Pretty much anything Um nice All right moment of truth All right. Yeah, we saw this before So it appeared now it appears to be going to this corner of the bed. So maybe it's going to do the bed leveling now It's getting chilly in here. So I turned off the heat because I'm waiting for a new blower for my furnace or for my um heater here And uh it is officially 58 degrees in here now That's what it's doing It appears to be uh Appears to be doing the bed leveling now interesting We just want to see it print now it's getting so cold ambient wise in here Uh, you know, I don't know how it's going to print anyways Turn the heated bed on Yeah Let's play a drinking game every time it goes around and we take a shot Uh, I don't know It's not a bl touch. It's uh, it's kind of similar ish, but it's a little probe That comes out of the bottom of the tool head and Um, it's it's built in it's really cool It's similar to a bl touch where it's a probe, but it's not it's not a bl touch, you know Let's go see here. So now it's setting the bed to 60 And 200 on both the extruders and they're already heated up So now it's just heating the bed. So it was heating the extruders that time. So that's good Any questions any questions It's definitely a touch probe. Yeah, I'm gonna have to fire that heater up get a little chilly Wonder how much you guys will hear it. Hang on. All right. We got it fired up Let me know if it gets too loud and we'll figure it out Uh, that is a great question. That's probably because that's not how they're, uh There's software or their firmware works. Um The most recent said why wouldn't they heat the bed before probing? I don't know That glitched my video weird stepper motor drivers are I don't know what the look I didn't I didn't dive under that in the board I did. Thank you I did I'm down Last time I looked it was about 12 pounds We're getting there though The video glitch hard when I plugged in the heater. Oh boy There goes the loud noise. I bet that's going to be crazy Yeah, it might be too loud How about now? Is that is that better now? I think that's better Hey, it's doing something. I think What do we think is that better? Well, that's doing something So it's uh, there we go. All better. Good. Hopefully it's not too loud with the heaters. So right now currently It's too high off the bed and it's not not sticking so I think all I can do Currently is uh started over until to do a z auto z offset Because there's no up and down on the z there I'm not sure why I think what it's doing trying to do now Is prime the other color? It definitely is it's priming the blue now It's a maker fair shirt. Uh, this was maker fair Milwaukee, I think this was my Briggs and Stratton shirt. Yeah Uh, actually it's it's purging. So I think what it's going to do is purge both colors um That's what it's doing on the side over there. You can't I don't think you can see it from the front but it's it's uh Purging it's both colors You're that or it's pretending to print by itself on the purge side So it's currently too high. So it's never going to print. Oh, and I can't see the control panel So there is a z offset process here that it's set in the manual if it doesn't stick to run through the first thing it's going to do Is come up an auto level Um, I'm really curious what it does if I just press that little probe down so the the button comes out, but not gonna um So what it's going to do is it's going to auto level first like we saw it do a little while ago and then The next step is the Adjust the z offset step and then check and save that's the three options it's given me So basically we got to go through the auto leveling and fun stuff because it wasn't set so I'm imagining um You know this back corner looks actually much more squished in the front corner and that one actually it does So i'm wondering if uh, you know, they just moved to us shipping or something. I don't know But we'll get it interesting Yeah, no That's what it's doing now. It's leveling itself. Hopefully like I said that heater's not too loud. It just got pretty cold in here Is seven degrees outside so My garage is like nope. We're uh, we're gonna cool down But we've been going for about two almost two and a half hours um What I might do is run through this let it do its thing and then uh Hopefully get some prints out of it. Um, I know we have some stuff to get done today Lindsay and I and the baby and I don't know how long much how much longer I can hang but we're gonna go through this part and see what it does Because I want to see what it does here negative 21 I need to see this thing print That's funny. I need to see it print too. Let's see what happens. Let's let's see how long this takes We'll give her a quick heads up that um, we're still here Oh So i'm wondering if I what happens if I press this down myself to get it not to go all the way up again I probably shouldn't I should let it do its thing jonathan barnes, definitely I will Let her know lunch date is now a dinner date. That's funny So, yeah, yeah, I know right what would the elate what would the laser have done? We just started there. No, um Good, I like that too. Um How about I should do that a little uh, like head to head A cyberdeck cafe. I'm not sure I'm assuming that's joe But um, he they said a little head to head between this and the or tour. I definitely should I got some fun stuff for the or tour While this is doing its thing. I got so they're newer. Um, their newer ones are going to start coming with a fixed Um, that's not it a fixed head Focus head at least and then you'll be able to just move up and down the z to the right height I put it over there. So there's that Thanks. I don't know where the heck I put it. There's too much stuff That goes with that one um, but it has a Fixed focus and then all you do is it has an adjustable z that goes up and down So that's cool They build on the firmware of a totally Useless machine. I'm not sure what you mean, Andrew Philip my friend z. How's it going? Not often we stream enough at the time where you can join right? So I I really like the little one Um, of course when I got it it was well into production. So as well we find This one being a pre-production model. Um, you know, it might be a little different than what comes from kickstarter So, you know, we got to go through the The the growing pains will call it Okay, so it did its thing Now it's Doing another thing So now it's in the center Um, I think it wants me to adjust this now paper for this So the second step there was to adjust this offset. I literally just used that piece of paper And leveled it like I would you know, I set the z offset like I was leveling it with a piece of paper And then I had to go down to step three, which is save. So I saved it delta Good, I didn't look that close. So if you've got that that's awesome So I don't know what it's doing right now. I told it to print again So we're gonna see what happens It can be slow. It depends what it's doing. We're gonna I don't know as far as when it prints how it's gonna be but um Got good point there Right So I think it's heating So it was just heating the nozzles and it appears to be Um It just retracted one of them Now it's spewing out the green side. It looks like It's like a play-by-play Again, uh, we got to we got to remember that this is a pre-production I mean Kickstarter literally just started like three days on this three days ago on this so Uh, now it's it's pushing down or it's pulling out the green it looks like and Oh, there we go. It's still losing there we go So it's interesting how that works it it You know because it's a why Because it's a wine that goes in and then there's a single nozzle It it's interesting how you know how much it pulls back and works like that Now we hope to see how upset is right. Otherwise. We might be cramming that bed, right? longest print ever yes Yes, yes, yes Yeah successful build. It hasn't crashed into the bed too. Shea and what we're about to find out here in a second so It's doing something Whatever it wants probably right now it looks like it's homing Definitely definitely homing So that was interesting it it purged the green It purged all the green out While it was heating or you know after it got up to temp it looks like Uh, then it just went to the center for some reason went back and now it's going up So that's uh Different we'll call it different Yeah, definitely it had a little crash a little crashing issue for the beginning there I think we're over that. I think we're we're past it I think it has to do this no matter what print head it has on it what tool head It has to come up It has to hit that top plate to push the probe down and then it can come down and and um home on the z And I think we're going to see that pretty much with every all of the tool heads. They all have to you know home so Um the difference between this one and the little one is the little one was much faster because it was a lot smaller Yeah, so like I said, it has to come all the way up to press that little probe in Um And then it you know it presses the top in it pops the probe out Gives you time to pull off the oozing filament if there is any Get a little filament cleaner brush There we go, I'm assuming it's it's going to come down it's going to home itself in the center And I have no idea if it's going to do the auto leveling again If it does that means it's going to go all the way back up again Yeah, amen. I don't know if it's I don't know if it's wrong. I think that's how it works So now it's zed it's zed, you know And I think it now it has to come back up How the tool heads work it has to come up to press that in now I can try it if I press this now Let's see what it does Okay, so I stopped I just pressed the tool head myself Um Hopefully that Yeah, it's actually doing the auto leveling now So we'll see if that worked if that works you can probably just do it, um With your finger and stop that going all the way up thing That's funny, let me just show you this if I can so This is the head this this is one of the heads this This is what it has to press when it goes all the way up like that So it goes all the way up it presses this button And then when it does that this probe pops out And that's what's probing the bed right now Then it homes itself when it homes itself it presses the side button right right here it presses this one and watch that probe It retracts the probe So now the probe's out of the way And everything is level, you know it homed itself and all that And then you know so when it goes up it's kind of a very smart Way to retract the probe because it has to hit this button To pop that out see right there And then it when it homes on the uh x axis over there It hits this button and pops that probe back in so then it's stored inside of there Um now it's out of the way and and what we're seeing is it's just taking It's just taking a long time to go all the way up and hit it and then come all the way back down right Now it's heating the uh the bed So one thing that I wish it did is heated the bed at the same time But it's not so now we're waiting That's funny Andrew. I actually I look like uh, oh 70-ish people earlier today, but um But yeah, I mean if you're if you're Using a multi-head system like this it has to find a way to probe right And it had and the way they came up with was to press that top button in which drops the probe at the bottom and then You know go from there the the difference is it was much faster on the little one because that little one is so much smaller than this That is true story. Um cyber deck I'm hoping I mean, I think this one. I'm hoping it will be different because obviously the ecu ecu maker Has already had printers out there. They've been successful and you know Hopefully this one that comes to fruition and and they do it I you know, the other thing is it couldn't have a like a be able to touch or an easy abl or something on this because It it would protrude right? Um And I guess their idea is to hide it So we're about three degrees here on the bed away from hopefully getting a print It's 58 out of 60 I think um I think what we're seeing is we're used to much faster process in the beginning And also it would have probably printed better I'm hoping it's going to print now if I would have just run the the auto z from, you know The z auto thing from the beginning But the instruction said to try it if it doesn't work then run the auto z. So that's what I did I mean It's going to be interesting to see that um cnc because the cnc surface on this is huge it's I mean That's a that's a good size cnc surface. That's a thick plate too. There's a really thick plate um So yeah Big uh, I mean that thing is going to be awesome Yeah, I'm hoping they you know, they probably have some firmware tweaks to do And we got good news Here Look We're sticking mostly That is uh better than we got before It was way off the top. So looks like it's doing a green square here So i'm wondering if it does like a purge square, you know That's what we're looking at now Do I have the mill tool head? Yeah, so I got I got all four so now it is Looks like it's pulling the green back and it might be pushing the blue in um so This is the other one same thing got a pop got the probe Um, but it also I don't think that probe will do anything I don't think the probe will help because it's it's lower than that mill, right? But that's what it looks like your spindle here um So yeah Six I doubt it. No No, no, no Yeah, I also came with a regular fdm head um A single color one it also came with a laser head And that's this one diode is in here And otherwise that otherwise the head looks just like everyone else. So each one of these just has its own Head now. I really like that has the fan for the laser. Otherwise you overheat it Uh-oh, that doesn't sound good does it? So, uh, what's interesting is it just hit the side of the bed. So I'm gonna stop it there So we'll raise it up a little So definitely a little bit of uh, you know Growing pains being a pre-production model and we're gonna get that I mean You never know what you're gonna get Obviously they have some stuff to work out before it goes live, right? um But definitely is a pre-production model and Let me just pop this over What I might need to do too is Some of these I'm gonna I'm gonna look and see in the instructions again So this back wheel here is all the way pulled down and the other ones aren't So I'm wondering if that matters even though we set the z offset already. I don't know but Uh, we did get a square To print which is which is super crazy to me because we didn't touch the printer um After it purged it went through the blue It purged the blue and then it hit the side of the build surface. So, uh, yeah, we're gonna Keep playing with it. I'll probably reach out and tell them what I found They'll be able to see it on this video Um sounds like a Harley-Davidson. I love it. Uh, you know, and I don't think As much as we want to see this thing print. I don't think that's happening right now I think I just need to either reach out and see if they have a new firmware Maybe play with the z offset 17 more times. I don't know. We'll have to figure it out. Um I'm willing to bet. I need to tighten these down, you know to make them all the same Uh, even though it shouldn't matter because it did the auto probing so That's interesting Yeah, rammed it rammed to the side of the bed that time So after it went back it purged, uh, it pulled the green out. It purged the blue through That's what it's supposed to do because it's a dual color print And then it rammed right into the side of the bed so We'll have to check it out I agree. Yeah, it should it should have well What's interesting is It probably should do some sort of move up and down when it goes over there But the thing is it's all in the same plane So it went over there. We saw it go around once so i'm not sure why it would have even lowered But but we'll play with it. We'll keep playing with it. Um, maybe I'll See how it goes. I do have some stuff we got to get done today But maybe we'll see how it goes and Um, I can go live tomorrow and get a printer play with the laser or cnc or something. We'll see uh, I just don't want to You know For lack of better terms keep beating a dead horse We'll have to dive into it again. It's a pre-production printer. It's not released yet. It's not, uh, you know, it's just on kickstarter now so While they probably incorporated a lot of things from the other one and the other one did really good The other one was a is a really nice printer. It just needs to The safety glasses that's right So it needs uh looks looks like it needs some tweaking So I will have to go in and figure out what's going on and then update you guys with what I found um Other than that Yeah I got to get going today But I definitely appreciate, you know, you guys hanging out. I know uh, we You know, we had a little fun. We almost got three hours here again today, which is awesome. Loyal moses. Thank you so much I really appreciate that I wish we could have seen this thing print that dual color. I'm gonna make it happen So we'll we'll make that happen probably And then we'll go back live either we'll go back live or we'll figure something out Maybe we'll do that tomorrow. It's supposed to be freezing tomorrow. Like our high here is zero. I think so why not? um But I think uh, I'm gonna get bailing. I'm gonna go uh, see what Lindsey and the baby are up to we have to make a trip and we're gonna do that and then We'll go from there. I'll come back and play with this thing later You're that or uh, I don't know. I want to see this thing print before I put a different tool head on it because To be honest with you, I would rather this happen with 3d printing than The the mill or the cnc tool head, you know If something's off on that That could be catastrophic for that with that thing spinning full on right? Um So, yeah, there's that Yeah, I wish I wish we would have got it printing but You know beta units This is some of the things that you don't see in the videos for beta units is all of this stuff behind the scenes That it took to get that thing printing good and I'm glad we could show it live I'm glad we could show what happens right out of the box and and um, you know a regular person grabs this thing This is going to do this. We need to figure out why so there's that Uh, I really appreciate it Um, yeah, we'll we'll definitely make it a video coming up Yeah, we would rather see the chip. Yeah, um Maybe we'll do uh, I like the idea of a head-to-head with the lasers So maybe we'll we'll have some fun with that with the laser tool head. Um Yeah, we'll we'll get it rocking, but I really appreciate it guys. Thank you guys for hanging out almost three hours today Thank you for donating everybody who donated, uh here and on paypal Um I just wanted to make sure I got a notification. I didn't get a different one to shout out, but thank you guys so much We're gonna have a Fun rest of the day. I hope you guys do too if you're watching the Super Bowl tomorrow Hope your team wins if you don't have a team pick one And have some fun there. Otherwise, um Yeah, we'll probably see you if you see a stream notification later tonight That means I got this thing uh printing and we're gonna go live and show you that But uh, thank you guys. I really appreciate the time. Have a great day. Stay safe. Stay warm And we'll see you uh either tomorrow or for sure on monday Where ethan and his dad ethan's dad will be on the show and we're gonna talk about that awesome app and some other fun stuff So thank you guys. Have a great day everybody. I better do this Oh man too much fun today too much fun later everyone