 episode of late night in the shop a couple clocks here one works which is this one it's got a chime this one the chime works but the clock doesn't so this one feels a little heavier this has got I don't know if it's glass or plastic sounds like plastic in it and it's kind of the backings pulling away there a little bit this one does not have the cover on it and you know the and it's also broke here but it's still like I said it still does work so what I want to do this one's kind of cool this is the one I want to fix up the core of that clock this is the one I want to get working so sit back grab you a cold one relax let's see if we can get something happening here stay tuned I will show you the time it is 12 22 a.m. Saturday well it's actually Sunday what Saturday it's Sunday the September 6 so start with the temperature it's a little muggy it is 79 degrees with a real field 90 heat index of 90 so we'll get you over here we're gonna set these down and to where you can see a little better I figure I'm gonna have to take this apart and if I can't get this one working so I've got batteries in here but the clock doesn't work I'm thinking if I can't get this clock to work this inside here I can take the guts out of this one that does work and maybe hook up to this chime I'm not sure looks like there's a little eye of some type up there I don't know what that's for but let me show you what this does I want to turn the hands from back here and each one does something different and it cool but as you can see the clock is not working I know this battery is good I can't see anything moving inside of here so let's take this apart first see if we can't get get this working and if we can't we'll go ahead and take the guts out of that one like I said this eye right there looks like some kind of sensor and I'm not sure if it's motion sensor like when you walk past it's supposed to make a noise or I'll show you what this one does I mean it's cool which is not as cool as the core of that one of course I'm a gearhead so see what this one does now this one the clock like I said does work on it makes ocean sounds when they're on the wall but I'm not sure what this is for doesn't seem to do anything but it's there for a reason right okay so let's set this one aside for now and let me get you over here let's take this take this apart and see what we can do with it and we'll go from there hang tight okay now I got I just sorry I just put this down here because I don't want to scratch the face up but so we're gonna have to take it apart let's check this battery I'm pretty sure well you know what let's just try a brand new one that way my haters don't get well just try a brand new battery first well I did the other day and still didn't work so I think I mentioned those I got a whole bunch of these at Walmart for like $2.50 or Kodak but you know it's good for little projects like this and it's not doing anything see the second hand is not moving so we're going to have we got to take this part anyway to fix that that's coming off I don't know what we're going to do with that maybe a little bit of contact cement but so let's go ahead about me a new side of these today one of my viewers who I have done a podcast with and invited me to a podcast here not too long ago this is by Daniel Campbell used to go by DACA he was asking me about a set of these well and I told him about mine I told him they were at the Dollar Tree for like a buck so actually it's actually too small for this clock I can probably get by with that screwdriver up there which I'm going to try but so I picked him up a set and I went ahead and picked myself up another set because you know eventually things were out okay so alright I need place to put these put them right over here I guess need to get my magnetic I've got a couple magnetic trays so hope everyone's week went well it's a long weekend this weekend I think isn't it one day's a holiday here so hope everyone's doing well this was hanging these two clocks were hanging out in the garage at her mom and dad's house okay that's why it's heavy this is glass it is not plastic so I'm going to put you on pause because I'm going to put this over here to where I don't break it okay ain't dealing with glass like this this we're just going to hang that over the chair see this is coming coming up it looks like it was double-sided tape I don't know if I've got any I'll have to check so first of all let's go ahead and pull these hands off of here they should just pop right up the other one yeah the the the hands were broke or bent on it and I've already straightened them out but if I have to use the other one I will be using these hands because I believe the clock inners are are the same I mean it's just the chime that's going to be different up here now this comes apart I want to take these screws out there's the same size yeah they're all the same screws so I can put them all together if they're different different sizes or whatever I try to keep them in different places you know so so they don't get mixed up let's go ahead and get these out of here all right now this should come off of here like this and this is how the chime works okay so these wires come in here when it hits a certain way it will chime hang on I gotta go check on something okay sorry about that I've got a tripod in the bedroom and it's aluminum it's not light aluminum like this one it's it's a solid type of it's an old aluminum old vivitarian the Snickers the cat apparently knocked it over just scared the hell out of all of us because I went in what's that they're like I don't know so it wasn't fully extended but so she has knocked it over all right so this is how we're going to take take this off you want let me zoom in a little bit I'll do the best I can I'm kind of not sure how the lighting is for you guys I think I made a video fixing a clock one other time didn't I take this off and see this thing should go back and forth I need to make sure yeah I had it in the right way I see nothing's happening usually what happens is the gears the gears will strip but pay attention how this is coming out okay that's the center can't mix that one up I mean pretty much now that good you'll see this should be like going back and forth or something but it's not doing anything now there was a piece of dirt in there I don't know if you saw that or not could had something to do with that still nothing and sometimes these used to have a little switch you could flip them off flip them off get it and I'm not seeing it on this one I didn't see how that came out okay right here see that I'll focus look at all that that is an issue so I tell you what I'm gonna do I'm gonna I'm just gonna try to clean that up with some alcohol and if that doesn't work what I'm gonna do is this is the chime mechanism here I'll just take the other guts out of the other the other clock but that's from it's definitely from a dead battery I do believe I believe let me go ahead and get this cleaned up with some alcohol hey I think that's got a lot to do with it like I said I'm gonna clean this up we'll see if that works I'll inspect it a little bit more I'm not sure what's going on with it but I don't think this is fixable this is one of those blob chips they call that because it's like a blob instead of like the square ones you've seen okay let me clean this off and I'll be right back with you okay guys unfortunately this one just cannot be saved it just it's just too far gone to make contact I am gonna save this because the gears are still good and like I said them gears usually end up snapping off is usually what happens to them so what we're gonna do is I already took this out of the other one it's the same process so I'm just going to twist these wires together which does not it doesn't matter which way they go alright we'll twist them together like yeah I just got this down here so solder does not drip down into the into the other board I got some I don't know that may be too big my the shrink tube may be too big for this so I did was cut it instead of unsoldering it at the board I'm always afraid I'm going to I'm going to get that board too hot and melt other things and unintentionally indirectly unsoldering something so I tried to stay away from that if I can this got plenty of wires so I thought I'd just go ahead and use this just cut the wire and solder the wire back together I'd like to have a real good fine tip soldering you know for this kind of stuff soldering gun that you can set different temperatures on and because this thing you know these they just they're on and off that's all and so get that blob off there if I can right let's go ahead let's get this other one on here we're gonna do it the same way we're just gonna wrap them around each other just like that just like a little braid type thing so I don't like a big blob on there but hopefully you guys can see that I know it's white on white but I didn't have anything darker to put down I get one of them blue mats and blue mats are expensive they're upwards around 30 bucks see then these things it just takes forever probably need a new tip for it I can clean it off but I just rather get a new tip I do have a gun soldering gun but I like these little tips when I'm soldering little wires like this that's not even want to melt the solder we'll clear back here see how that piece of solder drop down there it doesn't take much these wires are real little it's hard to tell on the camera because I'm zoomed in but okay that's what we're gonna do that now this one should be cool enough to bring this around I don't like sorry about that using a electrical tape on something like this if I don't have to this is not real important but I just think this gives it a lot cleaner look I'm gonna have to get some more some more shrink tube so I've got I've got all kinds of a bit it's for bigger wire I don't hardly have well this is the smallest I've got here and as you can see it's shrinking down the best it's going to shrink I think it can only shrink so far but it'll be better than nothing what I should have done was put a bigger piece over top of that but it's gonna be all right it's not like it's 110 there's nothing going to get hot you know I mean it just just to keep them from shortening out against each other they do they won't work it's it's not gonna catch on fire or anything but okay so I think I will put a couple pieces of tape on there and then I'll be back with you and we'll put this thing back together and check and see if it works it should I know that clock was working now whether it tells the right time or not I don't know but it the second hand was going around so let me go ahead and get them taped up then we'll put it back in put it back together okay now this thing I did put a little bit of contact cement on there but you can see where the tape was see there was a strip of tape there and around the edges was like a double-sided tape there was some there this is kind of like a plastic it's not paper and it's not cardboard so the only thing I can do is as you can see it's not working real well which is unusual because this is what I use and this is good stuff but I didn't want to put a bunch on either so I'll just have to someday I and I tried to clean that stuff off there I'm gonna have to sand it probably the old tape I mean Gugon wouldn't take it off and what do you call it say it just doesn't want to stay Gugon wouldn't take it off WD-40 wouldn't take it off so I have to sand it but that's that's another day I'm not going to bore you guys with a bunch of sanding you know what we're going to do is I want to take this I did get these taped up like I said see how ugly that looks but you know it's not gonna be seen but still I don't like that so so what this is going to go like this okay so this is going to go see where's that eye goes up there I'm sorry I'm breathing in that camera mic I'm sorry about that come on down through there yeah I don't think it's all the way but looks to be does that got a couple holes here I'm wondering if they're different no that's the same I'm gonna go in like this the battery was down see that goes into one but it's not going in the other so it must go it can't go diagonal this one might not take that could be what's going on there yeah it doesn't oops sorry yeah so let's get our decorative washer on here and that's one of the things had to go flat didn't keep bumping the camera I'm sorry now got to get her out here damn it I'm on the side of the camera because this camera is a lot heavier than my other one so if I use my extension bar I made it just kind of like just sags down and kind of like I'm afraid it's gonna break off so I'm gonna have to build a heavier duty one or something okay there so we got that let's get this on here how many guys was use how many of you guys were screaming it's fun upside down or it's on crooked wasn't really upside down but all right let's get our screws in here just drop them down in here for now and then we'll tighten them up I got a little tiny power screwdriver over there it's kind of cool I could probably use on something like this but again metal screws into plastic just to me it's too easy to to strip out these are gonna be a pain to start that one started it's what I'm gonna have to do so I'm gonna have to turn that until it kicks on and then I'll put it at at midnight or 12 o'clock then I should be I should be on the money because it just goes off every hour so it's not really gonna matter whether it was on say 120 or anything like that because it just every hour goes off so that's how I'm gonna do it okay all right so let's get some batteries in at least into this let's see if this works heard it click okay so let's get let's get some hands on here this one actually make a tool for these hands and again I'm looking say that's off until right now that's a little off but this is second-hand it does not matter but I'd like to see it come up onto the hour when it when it chimes all right let's put a battery in the clock part and there it goes so let's adjust this I know it's got to be after one now because I really messed with this a long time so it should on off there we'll take that out because you don't want to go on off it ten after right so let's take the hands off a little I thing is for there some kind of sensor I don't know for movement or I mean wouldn't have anything to do with you know darkness let's try this again well we don't need battery in just yet that's good it's taking around another hour let's get our battery in here okay didn't have battery all the way in these clocks are finicky man all right let's put the glass and I didn't clean it up yet because I didn't because then I'm gonna have to take this back all I still don't know what that thing's for okay that goes there let's get our trim piece yeah so it's kind of scuffed up but you know I can paint that I mean it's not an expensive clock it's not really kind of like a collector's clock but it's not a collector collector clocking what I mean so it seems to be right now let's get our other screws in here before these as well yep I'll get one whoops damn I know what I'm doing wrong I didn't have a screen in or flip down and I'm just trying to find the I thought they went into like a hole like a recessed hole it's a shame like that both I'm working but like I said the other one you know did have a bent hand which the second hand which was bent I did straighten it out a little bit I think he got bent in the move like them both working but that's okay at least we got one working which is going to go right along this back wall right over right along there let's get this on here still I hear it still ticking so is it we've got 157 okay so that'll work I'll 157 158 now so should be about right there all right so I'll spin you around maybe we can hear this thing go off okay we're back and it looks like this thing is sticking so it may be a gear it's usually what happens with them there's a gear inside there which I've got other gears so we still didn't get to then when you move it a little bit it's 159 I'll set it 159 right now and let's like I said these things are finicky okay just turn to two o'clock on my phone so let's let this go around I'll speed you up okay so right in there's where it was getting stuck it should be getting ready to do its thing again here any second because it is at two o'clock on this of course I might not have took it back far enough let's just go let's take it around another hour we'll take it to three I'll hold this for you I'll speed you up so you got stuck there well we almost had it I know the batteries are good so I'm guessing a gear which would be this gear right here that's for the second hand so that gear or the gear that runs this one one of the cogs is off of it or something so it just took off again and that's what it does it kind of messes and then it'll take off again unless there's something wrong with it which you know I mean I can't I can't put your money into it you know what I'm saying it's just I was hoping I could get it working okay so it did work somewhat so what I'm gonna do I'm just gonna lean it up here so I'm just gonna let it run a couple days it might be I but if not I'll have to get back in there and mess with it some more but anyway guys appreciate you guys hanging out with me that's what I did with my light since we was working down below my camera light since we was working down there for when we soldering all right guys so a little warm in this garage cuz I got that door closed I got the ceiling fan but I got the door closed so it's not really sucking any air in from out in the kitchen so what I'm going to do is I'm gonna sit here and finish my drink I will edit this video for you guys and get it uploaded and I'm not sure what I'm going to do tomorrow may just take it easy tomorrow I don't know stay tuned we're going to be doing some sanding on her bumper here soon and we'll get it get it primed and ready to be put on the truck her in her video she was talking about getting a painted we can paint I mean there's no sense and you know she's thinking she's gonna go pay a few hundred dollars and have a thing painted it's not gonna be the case if she takes it somewhere to have it professionally painted I mean they're not just going to shoot it you know and if she takes it to back your guy says y'all do it for 500 bucks he's gonna do the same thing I would do he'll mask everything off with masking tape and that'd be it well a lot of work because I said it a couple minutes and it's right on well it's four o'clock but but anyway you know it's you know I mean I would pull the headlights out in the grill out and stuff like that but and the mirrors off but you know I would just mask around the windows give it a quick sand job throw some primer on it throw some paint on and I mean it's not you know I wouldn't well I'd have to clearcoat it but I wouldn't see it stuck again but anyway I wouldn't have to I mean after I clearcoated I mean it wouldn't be that I'd spend you know hours upon hours wet sand and then 2000 grit make it you know like a super mirror finish I mean she's gonna be surprised I mean to paint a vehicle anymore it's not cheap I mean I would have almost $500 in it myself just in materials so I mean I can't see her putting two or three grand I can't see her putting a thousand dollars into a paint job really because I mean it's got a half a million miles on it's just an old truck it's got character you go doing all that and getting a painted stuff and then start having engine problems and mirroring problems and transmission problems and then you know you're sitting there you know you're gonna have a lot of money in a truck that's just not worth it so I mean if she wants to paint it all for a paint job on it for but I'm not gonna let her go have it professionally painted it just the truck is not worth it it's been a great truck to her but when you get a vehicle with that many miles on it no matter how good the body is you know I mean if that was a case I mean you're just gonna have too much money into a truck that you'll never get the money out of it you know even like for trading I mean you're not gonna get anything for trading out of it that's but anyway you guys know what I'm talking about but hopefully she's not talking about getting seriously getting a professionally painted I hope not because it's just not worth it I mean if that's the case you know they can throw the fender on you know Earl's shives will paint anything 99 99 yeah and that's all they did to you anybody work if it had a dent in it they didn't fix the dent they just shot it they just painted it that's it that's all you got was lack of paint I mean yeah you guys remember that Earl's shives will paint anything 99 99 buddy of mine years and years ago guy knew took his truck there he was doing all his body work what why you don't they don't do the body work they just shoot it like damn that's when I could buy enough paint to paint three cars for 50 bucks like well we didn't shoot it for $100 Jesus you know and that's that's what he did he did all work and I mean and that's all they did to and he took it in they just they just shot it down with some lacquer and that was it he had to clear coat it he had to do the door jams and because he was going from red to blue and it looked like a hundred dollar paint job I mean it was it was horrible you know and it just looked like you had rattle cans just sprayed it with spray cans you know I'm like damn I know I know she'd like to have a peanut but I just can't see doing all that work to that truck she don't realize how much it would cost to paint that truck you know professionally painted man if she'd like it said she wants to get a back yard guy to do it that's what he's gonna do he's gonna do it in his backyard and it's gonna look like that too but I just I really I just can't see doing that but so hopefully you know because I want to see her get her kitchen done she's waited a long time to get her kitchen done the house is done except for the kitchen so she wants to get her cabinets in and you know the bar in there you know that goes around the the stove you know so yeah I can't wait till she gets that done it's gonna look nice in her then she's doing she's doing granite she's gonna do granite countertops and I haven't seen what she wants to do it in but the way she described it I think I've seen kind of what she's talking about it it'll look nice in there look really nice so I can't wait to get it when she gets that done and then she'll be happy that's that bothers her all the time man I wish my kitchen was done wish my kitchen was done so hopefully that'll be the next big thing done on the house and then the house will pretty much be done except for the garage you know we have to paint the garage and get it cleaned out but you know that's stuff we can do ourselves but you know maybe once that thing gets going maybe I can hang it out and it'll run for a while I don't have to take it back apart but it's no biggie if I do I can put a gear in it if that's what it needs we just have to see I'll let it run a couple days and we'll find out so one more time before we go that wasn't very good let's do another one cool that one sounded like I don't know if they're recordings of real vehicles or not but that one kind of sounded slow kind of sounded like the that timing set too too far to advance too far and they'll do that once they get warm you'll crank over slow like the battery's going dead or something you got to set the timing back but a lot of guys they like sending a real far head because you know gives you more power but then you might get that ping that pre-ignition that that you might not be able to hear because you got dull pipes and shit you can't hear that engine rattling it'll burn a hole in your piston on a high-performance engine real quick and I know this for a fact all right guys so it is now 212 so I've been out here a couple hours now just messing around with an old clock it's a good thing you guys didn't have to watch me do all that trying to clean that stuff off and I'm not gonna bore you with that I bore you with enough stuff so thanks for watching guys I appreciate it hope you've been enjoying my videos don't forget to comment rate subscribe hit the bell icon I can't say that lately hit the bell icon to be notified of more videos like this as I upload them so again guys take it easy and we'll chat soon all right bye bye and take care