 Okay, this is my little speedboat doesn't actually go that fast, but whatever and I'm having a minor issue with it Nice and light boat you move Let's see. I've got pedal power in here Which works great? Except Okay This piece right here has a crack right there and the main job of this piece is It runs against this wheel and holds the hole it holds the whole gear Against the other Okay, so this wheel holds the whole gear against this other gear and the wheel pushes against this piece of metal here Whenever it gets to that little crack it lets the gear tooth slip just like one tooth while I'm pedaling So I think I need to take This piece off Replace it maybe with something a tiny bit thicker even there's a bit of extra space in there Not thick but a little thicker than this So to get this off you have to drill out these rivets, which is pretty easy Maybe I'll replace it with bolts later Okay, drill out the rivets and then I have to get this off somehow. I think I actually have to Take the whole thing off because it's gonna have to come off through the other side Whatever though, it's fine Well, I've been making tons of progress lately. I think I need to stop at some point and do some cleaning up Not right now though. We're just gonna keep going. All right. There's where my crack is Yeah, I guess I'll just drill that off take it off and these are the best bearings I ever made to plastic This is a piece of PVC pipe on the outside and I used a lathe to make a groove on the inside and made those little rollers I don't even remember what the inside roller is They're so nice and they've They've gotten a lot of work and they're still totally smooth and solid. Yeah. All right Let's get this thing off I'm drilling out the rivets so I can get this off. I just need to make a replacement piece of this with something slightly thicker I think Although even exactly the same would be fine All right, hopefully I have something This is just a giant beanbag thing Should have something in my scrap pile here. It's big enough this right here. Yeah When I cut this out, I need to go on the inside of the line The inside part here doesn't matter much cutting out the inside is not quite so easy Looks good to me Yeah Don't get your fingers in there always try to repair things stronger than they were Before they broke so let's get a thicker piece of metal on it now Should outlast the last one anyway All right, dude, let's go make some lunch. Yes Fix the wires fix the zombie chopper