Upload

Loading...

Programming instructions for Buick, Cadillac, Chevy, GMC and Hummer up to 2007

534,470 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Mar 26, 2011

Visit us at http://www.carandtruckremotes.com/

Remote programming for most trucks made before 2007.

2004 2005 2006 2007 Buick Rainier keyfob

2002 2003 2004 2005 2006 Cadillac Escalade keyless remote control

2000 2001 2002 Chevy Astro remote

2002 2003 2004 2005 2006 Chevy Avalanche remote keyless entry opener

1998 1999 2000 2001 2002 2003 2004 2005 Chevrolet Blazer keyless entry remotes

1999 2000 2001 2002 2003 2004 2005 2006 Chevy Silverado remotes (including 2007 Silverado Classic model)

2000 2001 2002 2003 2004 2005 2006 Chevrolet Suburban SUV remotes

1998 1999 2000 2001 2002 2003 2004 Chevy S10 pickup truck remote key fob

2000 2001 2002 2003 2004 2005 2006 Chevrolet Tahoe remote controls

2002 2003 2004 2005 2006 2007 2008 2009 Chevy Trailblazer remotes control

2002 2003 2004 2005 2006 2007 2008 2009 GMC Envoy SUV remote keyless system programming

2003 2004 2005 2006 2007 2008 Isuzu Ascender remote door opener

1998 1999 2000 2001 2002 2003 2004 GMC Jimmy truck remote door opener

2000 2001 2002 2003 2004 2005 GMC Safari van remotes

1999 2000 2001 2002 2003 2004 2005 2006 GMC Sierra remote key fob (including 2007 GMC Sierra Classic remote)

1998 1999 2000 2001 2002 2003 2004 GMC Sonoma pickup truck remote system

2003 2004 2005 2006 2007 Hummer H2 remote controls

2002 2003 2004 Oldsmobile Bravada SUV remote

Programming instructions

IMPORTANT: Before entering programming mode, have in possession all of the GM remote transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory if not reprogrammed during the same programming procedure. The other transmitters will not be functional until you program the transmitters again with new remote.

1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver's door panel and -continue to hold down until instructed to release.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically to confirm remote programing or learning mode.

10. Hold down the LOCK and UNLOCK buttons on the remote transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat the previous step for each additional car transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

Loading...

Advertisement
When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...