 We're going to see how to use an electronic strobe scope in order to measure frequency. Now this is an electronic strobe scope or just called strobe for short. It's simply a flashing light. It flashes at a regular rate and that rate is adjustable. Right now it's flashing at 3600 flashes per minute. And I'm decreasing the rate right now. I can either decrease it or increase it. I can do it in big steps or in small steps. Now you're probably familiar with strobe lights. For example a strobe effect in a video clip or strobe lights that are used at parties. But actually the strobe light was invented back in the 1930s and it was used originally to investigate the motion of motors. Because the motor was moving too fast to be seen with the naked eye but with the strobe light you can make it appear as if it were stopped. I'll show you how that works. We're going to be using for a motor just this fan motor without the blades on it. Without the blades there's this cardboard disc which has a white line painted on it. I want you to think of this as a clock. I'll turn it on. It's a high speed clock. It's moving too fast for you to see the hand but when we light it with the strobe scope you'll be able to see the hand. Let's take a look at that now. So you can see the hand. Actually you can see several images of the hand. What I want to do is make it appear like there's just one image of the hand and that it's moving as slowly as possible. We'll see why we want to get that effect in a moment. I'm decreasing the frequency now in big steps. I'm down now to 3200 flashes per minute and now 3100 flashes per minute. Now you notice that the line first appeared to be going one way and then stop and go the other way. Let's see why that's happening. First of all, if I could adjust this so that the line seemed to be stopped it's pretty nearly stopped now. I'll leave it like that for the moment. It's still moving of course. If it were completely stopped or appeared to be stopped then what that would mean would be every time this light flashed once the line or the disc went around once. So this flashes you see the line in a particular position. The next time this flashes the disc has gone around but the line is in exactly the same position and that's the only time you see it so it appears like it stopped. Now if it appears to be going slowly forward like this it means that the light is flashing a little bit too slowly. So let's suppose the line starts right here and between flashes it goes around once and a little bit more because this light is flashing a little bit too slowly once, back to its original place and then a little bit more so it appears to be slowly moving forward if this light is flashing too slowly. Likewise if this light is flashing too fast then the line appears to be going backwards. Now you've probably seen an effect like that in the movies for example stagecoach wheels sometimes seem to be going backwards in a video clip and this is because the video clip itself is likely strobe light. So it's like 30 flashes of light per second which are blended together so you don't notice the flashing but with something like a stagecoach wheel that is moving you see the stroboscopic effect. Now I said before that when we have the line appearing to be stopped like this, this light is flashing once every time the disc goes around once. Actually there are other possibilities it's possible the disc could be going around twice for every flash if we're going around twice there's once, twice it would look like it's in the same place every time. It could be going around three times or four times between flashes we need a way to determine if it's doing that. Let's suppose that right now it's going around exactly once between flashes. If I then double the frequency of the light then what would happen is that if the line started out here when the light flashed again it'd only get around half as far because the light has only half as much time between flashes and for the next flash it would be here and then here and so we would appear to get two lines, two images of the hand if we did that well let's try that and see if that actually happens if it does happen it means that this frequency is exactly what we said it was to begin with this is going around once for every flash of the light hitting a button on here called times two so the frequency is twice as much you can see that two lines appeared so that meant the frequency we started with was the correct one, the one that we wanted I can hit divide by two to get back to where I was and that frequency is 3,133 flashes per minute so that's how to use a stroboscope to measure frequency now it can be used to measure the frequency of many things that move at a regular rate from rotating objects to vibrating strings another practical application is for timing lights for automobiles