 Hey what's up folks, in this project we're building a portable sound effect speaker for our scooter. You can make this portable sound board that you can attach to any bike or scooter. This uses CircuitPython's audio mixing and looping features, so you can have an engine sound looping in the background and use the arcade buttons to mix in honking sound effects. Powered by the Feather RP2040, this uses an I2S amplifier for outputting high quality audio with a mini speaker. You can get the parts to build this project, links are in the description. With CircuitPython, you can easily make audio projects using the built-in audio libraries. With Audio Mixer, you can play multiple audio files together and output high quality audio over I2S. With native USB support, you can drag and drop Wave and MP3 audio files like a USB flash drive. The parts to build the enclosure can be 3D printed in PLA filament and the files are free to download. These quick connect cables make it easy to plug in your favorite arcade buttons. Be sure to check out the learn guide for full step-by-step tutorial on building this project. The microcontroller and amplifier are secured to a 3D printed plate that slides into rails built into the case. These panel mounted arcade buttons press fit and are easy to swap out thanks to the quick connect cables. This rechargeable battery is fitted inside a custom holder that gets housed inside the enclosure. A latching button is mounted to the side cover and snap fits into the enclosure. The speaker is fitted into a cavity on the opposite end with the speaker grill fitting on top. A 3D printed clip is secured to the enclosure and can be attached to the frame of any biker scooter. We hope this is as far as you can check out CircuitPython for your next audio project. Thanks for watching and be sure to subscribe for more projects from Adafruit.