 What's better one take down here. Welcome back to the video today. I'm gonna be installing these brackets on my 2021 Dodge Ram Classic. They are the brackets that mount this sidestep to the truck. So let's get started. The first thing that I did want to mention is I did struggle finding these sidesteps. Model number 68199101AC, that is this one here. It mounts to the truck up here, mounts to the sidestep down here, and actually mounts in the middle as well. Now this bracket is supposed to be from 2012 up until current Dodge Rams for if you have tubular sidesteps, but for whatever reason, even though that is what's on my vehicle, according to my van, it comes up to a completely different one. So if you are having the problem and your sidestep bracket looks like this, that is the model number that you need to order. So now let's go and install these brackets. So here is my 2021 Dodge Ram Classic. We're gonna check out the sidesteps so you can see the damage. The front one here, you do see it's a little bit bent, but you can definitely see it better at the rear here. Check this out. I definitely did a number on this and over the rear end did slide into a ditch. So we are going to take these off and replace them with new brackets. So to take off the sidesteps, it's just removing these two bolts and the sidestep will actually be taken right off just like that. You can definitely check out the damage now. There is a lot more damage than actually what I thought. One of the bolts as you can see here did get torn right out, where I could be replacing the rivets. And then it's just a matter of unbolting the old brackets and hopefully just bolting on the new brackets as long as nothing is bent here, but those ones there are going to be really hard to get to now that it's bent. So now that we have everything taken off, it's just a matter of matching up and everything does look the exact same. And now it's just a matter of bolting it back on. You put the bolts in, you make sure it's nice and snug because things were bent, it did take some time. And then now both brackets are put back on the truck, which is amazing and it wasn't too bad, but it did take some time. I did put some silicone there to make sure the plastic does stay secured. And then you just bolt on the sidesteps and you are done. Hope you guys enjoyed this video. See you guys in the next one.