 Sorry we're late for the party, running late today, no one's surprised, but today I'm sticking with my current obsession of making these popsicle sculptures and what we're trying to do is make the popsicle sculpture so that we can make a silicone mold and for the silicone mold we're going to be using just resin art seal. I don't carry this but you can get it from just resin. I'll try to carry it. I'm going to sew this out of the way because it's not really part of what I'm going to do. So I'm going to make this whole puddle and I'm going to put this in the puddle. What's on it? Is it black paint? Is this black paint? This isn't blurry. Is the feed blurry for you guys? Let me know. So what I'm going to do is make a puddle, put a popsicle in it. In the meantime, I'm just going to show you guys how to make a mold. I guess I don't understand. What do you mean? We have to have a thing. We have to have this before you make a mold, the actual mold thing. Which one? I don't know. What do you mean? This stuff? What are we going to pour it in? So we're going to do it around this? I don't think it's going to be dry. Doesn't all the stuff have to come out of the water? Because that stuff's going to break. I guess I didn't understand what you were... We can make a box, but I don't know if you want to pour this over... I mean, we could just make it. I guess the puddle really wouldn't matter. We need one for a puddle. Well, I just... I don't think that it will be dry in time or they are just going to sit here and watch it dry. I guess it really wouldn't matter. But then if it breaks inside the mold. What's up, y'all? Welcome. Welcome. Does the feed look blurry? Does it look blurry on your phone? Did you look at it? No. It just looks really... Hi from Vancouver, Canada. Welcome. Oh. Oh,ie. What? I'm confused. Hey, zip it, pippy. You want to turn the light on? Let me see it. All right, so I mean, we can just attempt it just to... That's just going to be a lot of... So I just made this today and she just made this one here. And there are two different plasters. We have this perfect cast, which is the ice cream is made of ice cream. The popsicle is made of this stuff, and then this is made of a different plaster that she had. And I'm just wondering if this will pop off of here without breaking. So what I think I'm going to do, this is just a test, so I guess we're going to eat the silicone is getting this out of the silicone mold, if that makes sense. Yeah, this will. This will be. See, it'll be... Yeah, if it doesn't break, where I just saw it break. But I guess if it breaks and it's not sound a big deal, if there's a mold, then we cut some... This should look super cool. What we'll do, you guys, I have no idea what I'm doing. We're just going to make just a big... Last time I cut into a mat and I don't want to do that again, so I'm going to move this mat. This is a mat that just resin gave us. We are so not ready. It's Sunday. You guys ain't got nothing else to do. Watch me mess around. All right, so we need to figure out how high we can make this. Let's give it a good this will be the bottom. All right, so these are going to be the sides. Two and a half, two and a half inches high. Mind you, I'm a very, very bad carpenter. So if I get this wrong, which it looks like it's already crooked, how do you measure something and it's already crooked? So what are you guys working on today? How are you doing? Anything interesting going down? How is that crooked? I literally just measured this and did a straight line and it's not even a straight, straight line. You guys, I am the worst. I guess what we could do is just, this will be the shape of our mold. We want to give it some decent edges, right? I'm just doing this on the fly, you guys. Don't mind me. Do as I do. Just don't do as I say. That makes all of the sense. You guys, really? I'm putting glue on the, you guys, I just opened a drink, so I have not been drinking. I swear and this stuff is like lava, so I do not want to get it on my fingers. I'm making this using the, not necessarily measuring it, but it kind of is measuring it, but it, you're just, you're kind of putting it together based on this, you put, stick here, then one comes off here. It doesn't really matter and then one comes off here. So I'm just kind of going in a square circle thing. We'll see. I tell you guys, I'm not, I'm not a carpenter by any means. So hopefully you guys can, I will drink for you. Evelyn? Do this. How about we just score that so we don't have to tape anymore or glue anything together. You guys, if this works, it's going to be so fun. All right, completely. So what I'm going to do is I'm just barely cutting into this. I'm just cutting just the top layer of this so that it does that. I'm going to do this. Now I can measure it right here, or if you're seeing the inside of my ear, cut some of this off. It doesn't have to be perfect because this mold is just a temporary to make a mold. So oh, look at that. Y'all, it's perfect. Fits its chips. This is so hot that it's literally, it melts this foam inside of here. And it just, it stays hot. I have a T square over there, but this will do. Like I said, this doesn't have to be perfect, y'all. It's not tool time Tim or nothing. It's hard. It's hard. Tool time Paul. Go over these hot glue gun. Look at this. This stuff is so hot that you can just point it at the top and just let it drip down the crease. It is pretty insane. And it will drip in a straight line. Wish I had some dust cleaner, some dust cleaner. You can use that stuff pretty geniusly. If no silicone comes out of this, I'm going to be ecstatic. Freestyle it. That's right Evelyn. Lisa says, y'all, I love all my fire sale pieces. See what I'm worried about? You see that lighting? See that light you can see in there? Hopefully that's covered with glue. I know. I mean, it's pretty secure all the way around. See, it doesn't have to be pretty, you know? It just has to be functional. I think it'll be all right. I like it. I get satisfaction out of making stuff like this because we want to make something. I want to make and put together and paint and make it from start to finish. And I don't know what to do. I don't know how to to do that. It'll be all right. Nice and everything's dry, secure. I just, my only thing now is how do you know how much of this stuff to make? Honestly, I, God, that blows my mind out. Sorry for the movement, y'all. This camera needs to be tightened up a little bit. All right. I think it's going to be more than one of these little cops. Like, that's a lot. So what is the, this is 10 ounces? Yeah. How are we going to get out of what? What do you mean? Well, tear it apart. Okay. Okay. Yeah, like I said, this is a test. So I have no clue. Yeah, you just have to take this apart. That's what I'm saying. This is not a permanent mold. But we do have some of this stuff. Have you opened that window, babe? With no shoes on in the studio? Okay. You see how she gets upset with me when I tell her there's no, like, that doesn't make any difference. You still have no shoes on the studio. I'm just here for your safety, babe. Give you a ring and the wedding of your dreams. And you can't complain about having shoes on in the studio. Me. And that's all that matters. You said, and if you guys didn't know, right, here we go. So 10 ounces is here. So let's do, let's do like 14. Should we do 14 ounces? Let's do 16. We'll do eight and eight. Just resin. Here we go. I'll probably need them, but I'll need a big stir stick more than I'll need. All right. I don't think it'll matter. All right. We don't sell this, do we? And if you're asking, Jeffrey, where did you get those gloves from? Oh, they're on our website. Remember when we told you guys we were getting gloves and you wanted to buy them? We got them. They're here now. They're here now, but they do run a little small, so it'll be okay. Yeah, especially for something like this. You don't want to have to make it again, and then it starts setting up. And that's how you can tell it's mixed. They said three minutes. Don't worry, she has that. In the studio, they should use a lot of exacto blades. And stuff is heavy and has corners and... It's true that I should wear shoes in here. I think Severin about it. He is right. Well, he agrees. That's a pretty purple color. Reminds me of one of our newest colors, Judy Schimmer from Color Fashion. Square Table Degenerate Podcast. Hello. Let me start for you. This stuff is like super thick. Well, it says that, or like, I mean, it's mixed because it's the same color. Yeah. Like when you when you see it all the same color, that's when it's supposedly mixed. Provide equal amounts, both parts by volume stir for three minutes or until uniform in color. Pour or spread over the master up to 40 minutes working time at 25 degrees Celsius. Don't have any idea what Celsius translates to. I think it's like 60 or 70 degrees. Tap Project on flat hard surface. It requires gently remove bubbles with a heat torch. Cover and let stand to enjoy the high detailed durable mold. Hey, Diane, thank you. Let it just let it fill. YouTube doesn't want people to have their email in. So he's pouring in one side and letting it fill. Hi, Kathy. This has a 40 minute working time. So close. We have a little we have some time to make some more. So if you guys are just getting here, we are making a mold. A little popsicle. Lisa, it was the first port to make this mold. We're using poster board, a plaster figure, hot glue, and just resin art seal. That's way too much. Why did you make that much more? You really needed like four. She said, why did you make that? I can't win for losing you guys. Can't win for losing. You never lose. So just like when you make resin, when you mix a silicone, you need to scrape the sides and the bottom. This is a one to one mix. And it says it makes for three minutes like epoxy or until uniform in color. So it's cool that one part is blue and one part is pink. So that when there's no pink or blue swirls, that's when it's probably ready to go. Is there any hot glue in that? Because I want to try it. It's required. Fulcure two to five hours at 20 degrees Celsius or 20 to 30 minutes at 30 degrees Celsius. That just 10 degrees difference. It cuts down that much. So there we go. See this guy. So Jeff is adding hot glue to the bottom of our that. This other box that he made earlier, a little bit of silicone. I'm Lisa. So close. A little bit. Yeah, let's just make like, yeah, just make a teeny bit more. So does it matter if it's part A or part B that goes in first? No. You may make six ounces. No. No, I'm gonna make four ounces. So how fast does silicone usually set up? It looks like the bubbles are rising. It says on here you shouldn't have to use any heat or anything like that, but that you can. Vinnie, that's a good point. We didn't use spray release. I guess we'll see. I sprayed it in that one. Right. He said in mold number two. We'll see. What's funny? Just how we're doing this. I've done a large alcohol piece. Judy has one that I did. That was 24 by 48. If you guys want to get these, we sell these trial sticks too. Very popular. Very, very popular with the kids. Stone Coat just bought 3,000 units of them. You guys want to get in on the bandwagon before they release them after you scrape the last bit out. Finally, it's perfect. It's kind of, you're spilling it. It's kind of like when you have, when you're eating cereal and you're like, I have extra milk left. I'm gonna put some more cereal in it and then eat it. It has too much cereal and I need more milk in it. So then you have to put more milk in it and it's just a big situation. Hold your ears, kids. Pro tip. What are we getting? We're getting like fish eye for something. Well, we were doing something and I forgot that I had used. It was a regular stick and I had wiped it off and was stirring something. Do not use anything after this. Like, unless you're, I don't know, doing something other than resin, but this will give your resin fish eye if you stir this and it has any silicone on it or anything. So don't reuse this stuff with resin. That's what she said button over there. What TWSS means. That's what she said. So apparently, I thought that this would be done in like 30 minutes. It's already starting to get like, I guess it's because this is more like together and concentrated. This one is gonna set faster. Yeah, I will post a video later tonight when we unmold these. It will be in like a couple hours. It won't be live. It'll just be a video. So I hope you guys come back around for that. If you haven't subscribed yet, please do. We're artists till death and we go live every day. Usually at 6 p.m. except for on Tuesdays at that 2 p.m. central. It's usually resin work or some form thereof. Today, it's making molds for resin stuff. Sorry Diane. Lisa, I saw your message. I have to look for it. So yeah, I hope you guys have an amazing day. Be kind to one another. What do you mean, let you know what's going on? With what? Be kind to one another. You never know what someone's going through. So you don't have to. We'll see you guys later tonight. Bye. Elisa wants the painting. I'm just gonna three-way message you guys on Messenger. Bye Paul. We said bye.