Loading...

1 Step - The Rust Killer - Rust Converter Demonstration

72,015 views

Loading...

Loading...

Transcript

The interactive transcript could not be loaded.

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Nov 17, 2011

http://interstateproducts.com/rustkil...

1 Step - The Rust Killer - Rust Converter Demonstration

Transcript:
Welcome to Interstate Products' Industrial Solutions Video Library.

In today's segment we will demonstrate how to completely eliminate Rust using "1" STEP (The Rust Killer).

Rust, also known as oxidation, can result in aesthetic damage to surfaces, structures, vehicles and equipment; or worse, rust can create safety hazards by weakening the structural integrity of these metals through long term degradation, causing structures or materials to become brittle and crumble apart.

Traditional approaches to rust removal include sandblasting, scraping, and then priming surfaces with a rust-inhibiting primer.

Today, the best method for rust control -or rust elimination- can be accomplished with the use of rust converter solutions in the form of brush-on liquids.

"1" STEP (The Rust Killer) is a rust converter treatment that neutralizes existing rust and acts as a smooth long lasting primer on both rusted metal and previously painted surfaces. It also ideal where there is a need to paint over rusted surfaces. "1" STEP contains no Volatile Organic Compounds and no hazardous air pollutants.
Today, we will demonstrate how to apply "1" STEP (The Rust Killer) on a common garden tool.

For safety it is recommended that you use protective eyewear, disposable gloves and have proper ventilation.

The tools required for the job include:
o A Wire Brush
o A utility cloth
o A paint brush
o And a small plastic container

• To begin -- prepare the surface by using the wire brush to scrape away any loose rust, dirt or debris. Then wipe the surface with your cloth to remove any remaining dust.
• Next - Place a few ounces of "1" STEP rust converter into your plastic container

• Then -- use the paint brush to apply "1" STEP to the rusty surface. The treatment begins to immediately penetrate and neutralize the rust. It will appear White when applied and then dries in 30 minutes into long lasting black protective coating.

• Simply use soap and water for clean up. If needed, the treated surface may be painted after 24 hours.


"1" STEP (THE RUST KILLER) works by chemical reaction to quickly eliminate rust and neutralize it completely, turning it into an inert polymer and long lasting protective coating, preventing future corrosion.

Primary applications include use on construction equipment, structures, vehicles, auto rust, railings, marine applications, machinery and for general equipment maintenance.

For detailed information on our line of rust converter and rust elimination solutions, please visit our website at www.interstateproducts.com


www.interstateproducts.com/Icemelter.htm

Loading...

to add this to Watch Later

Add to

Loading playlists...