 Hi, I am Filippo Kolayani and I am here today to talk about the Blue Energy Mesh, the ST implementation of Bluetooth Mesh Network Topology. The Bluetooth Mesh Network Topology has been released by Bluetooth SIG in July 2017. It is targeting smart home building industrial application like smart light or wireless sensor network. ST micro electronics has been working close to Bluetooth SIG to create and define the mesh specification. The Bluetooth Mesh Network is extending the range versus the standard Bluetooth energy point-to-point communication, since each node can do the relay of the message of the other node. Usually in the standard mesh network topology we have a node and a controller. A node could be a standard end node like a smart light, a temperature sensor, a thermostat sensor. And the controller is said to be a smart device that could be done either from one node or from one smart phone. So in this way I can use my smart device that is done from the evolution board and double tap can turn on, turn off all the light, all one light of group of the light. Same operation can be done using the smart phone, using dedicated app. I can switch off, switch on the light using tap on the Android app. It is important also the provisioning that is always belong to the Bluetooth Mesh specification. It is done using a smart phone that in secure way using encryption you can create your secure Bluetooth Mesh network. The Blue Energy Mesh is based on Bluetooth energy-1 device with 128 kilobyte of flash or Blue Energy-2 device system chip with 256 kilobyte of flash. Or you can use combination from SN32L1 plus Blue Energy MS device. Today ST is able to deliver the Blue Energy Mesh SDK that is giving one few more examples to run your network, Android app or iOS app and all the documentation that you need to create your final mesh network. So start to design your Bluetooth Mesh network using Blue Energy Mesh and STMAG electronics. Thanks very much for your time. Have a nice day.