 Okay, welcome to VCH Technologies. Today, I'm going to show Rebecca how to make a refillable cartridge, and Rebecca never refills any cartridge before, right? That's correct. Okay. So we're going to do one each. So I'll give this nice, those called virgin cartridges, it's made by Canon, so never be refilled before. Okay. So it's first time, so it's called virgin, and this is, this is a non virgin third-party cartridges. Okay. And you can see it's made by Canon, but people already refilled it. Okay. And you can see it kind of gross here. Yeah, that is kind of gross. See that build up? Oh, yeah. Okay, so, okay, this is yours and this is mine. Okay. I like, oh, sorry. First thing I do is I like to protect the printhead, this is the printhead. Okay. Okay. Protect your printhead. That's all where your money is. Okay. So what I do is I get a piece of tape, and this is non-sticky part. Gotcha. Okay. I don't want the sticky part stick to the printhead, so I flip backwards. Okay. And I need to protect the electronic ribbon. Okay. So I'm about to start where the ribbon is. Okay. And then I just hold like this. So this is a sticky part. We got you. Okay. So I get one more tape here. Gotcha. Like this. And this piece, this part is I protect, we're going to use super glue. I protect the super glue dripping down, and I mess up with the electronic ribbon. Yeah, I don't want to mess up the electronic ribbon, because if it ruins, then you can't use it over. Right. Gotcha. So I'm going to stick it a little bit higher. Okay. And bend over. And so you can see if the hot glue, the super glue drip down is not going to mess up with the ribbon. I see that. Okay. Both sides are protected. Do you want to give it a try? Not yours? Sorry. I may mine a little bit longer, but that's okay. And the gloves don't help. It's not bad. Yeah, this part is like a little hanger. The problem with this, actually I say if the hot glue, if the super glue drip down, okay, you'll still get a silk. Okay. So I'll cut this part off. So make sure this is right below the line. Okay. Gotcha. Another one. Yeah, there are some customers that they tip the entire thing. The entire thing. You don't want to do that. The next door, they just have this party all the time. Yeah, I know. I was hearing that already. I was like, oh, great music this morning. The problem is that we have three songs. That's it. They just play the over and over and over. Yeah, probably they listen to somebody's phone, their PlayStation. Okay. I kind of got wrinkled on my gloves, but it's the first time I'm doing this. I like to make sure this part just like a little bit more. Yeah. Okay. By the dot. Yeah. So make sure I mean the glue going to draw drip down. So this is yours. Yes. And this is mine. This is mine. I haven't done this yet. And this is a lots of non virgin. They have this label here. Okay. It's another set of chips. Okay. And actually if you peel this off. So it's a lot smaller. If you actually this is the same model. So if you peel this off, it can't become this. Okay. Interesting. Oh, oh, it does. They block this. So I'll show a full tank of ink. This is nasty. I never I never feel anything this nasty before. I see that. It's just gone right there. Yeah. If we can refill this anything can be refilled. Okay. Okay. So it looks good. So second thing that I like to do. I like to do is cut this label. So it gave me a label number, the model number. Because I have so many models look at exactly the same. So I just I just put it here. Okay. So in the future, I can look at this. I know which model it is. Okay. And you can see how they refill it. So they just they just drill three holes. It's interesting. Okay. So this one is the same. I just cut this. It's to stay. I think I ruined it. Anyway, I was just I'm busy enough to tell me what it is. Okay. Yeah. Okay, here you go. Be careful. I don't cut your finger. Do you know how to peel apple? I do. But that's what the knife not with a razor blade. So yes, I do know how to. I try to teach my kids how to peel apples. So first thing to do is pulling the knife towards you. Second thing is to push. I got it off, but it wasn't the way I wanted to be got it off. So I'm going to come up here and try that side. Maybe we'll just see this. Oh, yeah, I got it. Okay. Nice. I got it. I got it. Do I'm going to do this one too? Yeah. Yeah. So I see like the bigger numbers on the bottom. It's kind of harder to get off. And it splits. I just go for the top one because it seems to be the one that I want. Got another one. There we go. So I got both. Next thing is the hardest part of this. I try to explain to people. Okay. I don't know why people don't get it. And what you do is I put it on edge so I have more room here. Okay. So what I do is I just find this seam. Okay. Just push it, push the knife in. Try to do like this. Okay. And it pops right open. Got it. I don't know why it's so hard. Try it. Okay. That's your first time, right? Yes. This is my first time. We're on a stage, right? This is a real culture. No, another way. Another way. Sorry. And there's the, okay. So on this side you want to make sure it's on this. Yeah, the bigger head towards here. Okay. So like this you want like that. You want to sort of, I always like to look at this. Then you cut like this. Okay. Don't cut your finger. I'll try not to. Okay. I got it. Yay. Why is it so hard? I don't know. Okay. Get another one. Okay. I'm going to try this one. So which seam? This one here or this one? This one. This one. The first one. The first one. Yeah. Okay. Maybe that's the one. Maybe people cut in the second one. Maybe. There we go. There's my second one. That was real easy. Let me come on. Okay. So next one is sanding. Okay. I normally do not take the sponge out because there are lots of debris after sanding. Okay. And black. Okay. So okay. So if you compare your un-grinded, you can see there's a groove. Yes, I see the groove. Now you can see it's totally flat. Yes. And it's smooth. Right. Another thing is after grinding there are maybe some things here. So you just use a razor blade to make sure it's the edges are cleaned out straight. Gotcha. Just get all that debris. Yeah. You want to try? Sure. So there's mine. There's some that just fell off. That looks pretty good. Maybe a little bit more. I still can't see the groove here. Okay. There we go. I don't see no groove. Okay. Good. Mine's all nice and smooth. Now the color one. Don't forget which color it is. Okay. This is magenta and cyan and yellow. Yep. Gotcha. Oh, no. I'm just kidding. I still can't see the seam. That's okay. Now it looks good. Okay. This, maybe it looks okay. Actually, this one, the color one is the hardest put on color. I'll show you. I'll just say this. You can see all the little grooves in the knife. Can you see a little bit more? Yeah. Okay. So after that, I'll clean up this. Next step, I normally do it in the bathroom. The wash and the filter. Yeah. Yeah. Okay. So this is the black. Okay. I just removed the sponge. Gotcha. See the nice clean. So this is like a cannon. They just gave a little bit of ink. Gotcha. And so it's not even full. No, it's not. So what are we going to do? So we're going to fill this whole thing with ink. Okay. Then you're going to print lots, lots more pages. Okay. Yeah. That's nice. Yeah. I'm not sure this one can be saved. I mean, it looks like the yellow one is totally leaking. Don't get something out of there. There's more sponges. As you can see, it's all empty. There's nothing in there. Okay. I'll do the water. I'm going to do that. Okay. A little bit of water. Maybe we've got the paper kind of in there. Okay. Sorry guys, we left the way in the trash can. Kind of as a bigger bucket. So I'm going to move this over just a little so you guys can see. If you can see, it's kind of dark, but just rinse it out really, really well. Okay. Quite a bit for yours. There we go. Okay. I'll bet out later. Okay. Sorry for the wet paper, but I can still see it. This is not going to be clean and you're going to get things everywhere. So that's okay. Just make sure you wash really good with the soap and try not to wear any professional attire because ink won't come out. It sounds like a pearl now. No, just ink gets everywhere. I have learned that. Yeah, if you're at home, you probably want to wait a little bit longer than us for this to dry. Should I be worried? No, no. This one is totally protected. So let me stop here. Yeah, I already started. For the first time, you want to practice a little bit. What I nearly do is because you only get one chance to put it in. Okay. Okay. So what I like to do is I push this edge and I match this first. I press it down. Okay. The hard one is the color one. The color one is the same thing. I push this edge, make sure it lands up, and then I press it down. Okay. Okay. You want to try yours? All right, so this one's the black one. Sorry, just trying to get a little bit of water out of there. It's the black one. Yeah, that's the other one. And this is my color one. Just get all the stuff in there. Here is one. Okay. You want to try it again? Just make sure next time you now it back. Okay. Next one, let's do the black one first. Okay. Okay. Here's you get it. Here's you get a tube. I'll get a tube. Okay. Everybody get a tube. So you'll screw it up and not going to activate it. It doesn't want to come off. Oh, it is. It's already open? Yeah. Okay. Okay. So a little bit. Don't screw it. I'm trying not to. Be careful. Yeah. Yeah. One time I glued my two fingers together. Oh, wow. It took a while. So just around the edge? Yeah. Yeah. Yeah. Put this one. And then hold it. Hold it. And use a rubber band. To put it, make it tight. Yeah. To hold it in place for the drying process. Yeah. Okay. And look at this seal. It's all solid. Gotcha. Okay. Another thing I like to do is I'll plug it so I don't have too much film inside. Gotcha. So the fans get out. Okay. So I'm not following my edge. For somebody who doesn't mess with super glue, I'm doing pretty good. It's this way. Yeah. Oh, yeah. I do have customer glue at the wrong way. Yeah. And I like her send it in because she said after put the cover on, it doesn't fit. I said no way it doesn't fit. And I let her send back and this side backwards. Of course, you can only do for the black one. There's no way you can do that for the color one. Yeah. Okay. The color one, it's a little bit different. The thing is you have to glue this. Okay. The T. Yeah. The T. And so for it to have enough ink, I also pre-glued this T, too. Okay. So what I do is I do the round, the surroundings first. Okay. The cover. Okay. I do have another customer forgot to glue the T. So all the ink, all the color, they mix up with each other. Oh, okay. It's really important. Yeah. You'll make sure it's all solid. Oh, you know what I forgot to do? Let's take my thing out so it's kind of de-fume. All right. Plug. Yeah, you're gonna have film anyway and just help a little bit. Yeah, if you really don't like, you want to like really clear, maybe you get some like blower. Just blow the, blow the air. Air can. Yeah. Airclam blower. Gotcha. Okay. Do you mind now? They start with the outer. It looks like you've done it like many times. No. I'm just meticulous with my hands and I'm gonna start with the top first. Hold on. I forgot another. I gotta get another rubber band. Okay. That's for the first part. Okay. There you go. Yeah. Just be careful when the first time when you lean over, there'll be some ink coming out. Okay. Try it. Is that what you do as you fill it all the way up like that? Yeah. And then get your plug. I'm taking and filling up mine now. So this is black. Just do it in. Okay. All right. Did something wrong there already? A little bit further in there. Is that it? It doesn't matter. Just so I don't get air bubbles. I think I will bubble up. I think it'll go too deep. Do I still have ink or is it empty? It's empty now. Sorry. I thought it was. I thought it was still had some. Sorry for the air bubbles. Try not to get the air bubbles in there. It's halfway there. And when do you stop right there? I'll fill a little bit more. A little bit more. Okay. There it doesn't matter. Yeah, that's good. I'll get your plug in. And can I have the paper towel? Actually, here. Sorry. Didn't know I had some. Just wipe up the excess, right? Yeah. Is that that was for me? Okay. I was like, that's not leaking, is it? Oh no. This will also let you know if there's any leaks, right? Yeah, leaking is, I mean, it's from the bottom, Miss Goofy. I mean, we don't want to get a clog. So I'm going to start with my red and the red is the top. There we go. There's my plug. Yeah. I don't know if that's sealed. If it's not sealed, the worst. If it's not sealed, you can just go back and use the kind of glue, not the super glue, but super glue, gel like this. Oh, the gel. Okay. The gel will seal like that. It will take a day to seal it, but you can just like put it around the edge. Okay. Yeah. Don't worry. Just fill up the rest. All right. We got blue going on. Yeah. As long as you seal the middle correctly, the T correctly, the outer edge, you can go back and reseal it. Okay. The inner one, I mean, you have to cut it. Let me try the magenta seed dust. It is. That's okay. We're good. We're still. So we leave the cartridge dry for a couple hours, ideally overnight. So the glue can be dry. To test if we glue the cover airtight, we can blow air into the air hose. Those white ones, there's a little hole in the middle. So when we press the syringe in, we're going to see if there's any leaking on the side of the cover. So for example, the magenta is leaking air. And then after we test two other colors, the two other colors are airtight. So it's very easy to fix. So what we do is, first thing is you drain the ink out. So you don't get the cartridge top wet. Then you add more superglues on the edge. And then you can leave it for a couple more hours. If I blow air into the air hole here, the ink will come out from the bottom. So if there's something, anything clogged, it will blow the clogs away. So I'll put like one mil of air. So this one's clogged really, really strong clogged. So what I'll do is I get this, and then fill it up with some water. And just set it in there? Just set it in there for a couple hours to dissolve the clog. All right. And another thing to do is, so there's nothing coming out. So this is really clogged solid. So another thing to do, if the water doesn't work, what I'll do is I get these BCH cleaning solutions. That's the green clean. Green, yeah. You can do like the transparent one. Just as long as it's cleaner? Yeah. Okay. And let it sit there for a second? Yeah. I'll put it in a couple hours. Okay. So we're going to go ahead and put it in the printer right now to try and see if we can't unclog it completely. Okay. The printer has a function to unclog it. So I'll go do some printers. I will go printing preference and the maintenance and deep cleaning. Deep cleaning. That's okay. Yeah. We're going to do it twice then we wait two hours and do two more and the safe works. Okay. So it's completed its process. And they also do a print check pattern. So don't give me a test print. Let's say your back has first refill. Hopefully it did good. No, it's not. It's only half of... So it's just like what we said, like half of them is clogged, half is not. Yeah. So you can see the lines on the top. Sorry, my finger. So it's not complete. So it's still clogged. So we'll take this guy out and clog it a bit more. Okay. So if you see the one we stuck it in as already unclogged, say over there. Yeah, I see it. So it's difference between water and the actual cleaning solution. I see that. It did clean out that one that was really clogged up there, huh. Okay. That one is done. It's a lot better. That's perfect. There we go. That's what you want to see with the black. Yeah, I need to see. I don't know. Is it just because it's wet that there's kind of like smudged on the line? Is that fine? Yeah, it's because it's light. Okay. That's fine. Now we're going to do the top one. Okay. Here's your first refill. Okay. Is it hard? No. There's some steps and there's always second guessing, but I think this video should help people with that. The black is still kind of smudged. Yeah, it's because it's a transition from the old ink to the new ink. Okay. So it's just filling it out. Yeah, you can do one more deep cleaning. And one more deep cleaning. Actually, I don't think so. I think it's already you'll stop the ink by one point here. Okay. So let's put in a second page. It'll be different. Okay. We're doing our second print page. And he is stating that it should run it all out the old stuff and the new stuff should be in there. And yeah, it looks like it already. You could see the BCH and everything filled out pretty good. So you might have to do two test print pages just to make sure that the... Yeah, I can see it's much better already. Yeah. Yeah, you just need to use up the old ink. Okay. And if it doesn't, you just do a little bit of deep cleaning. Okay. I'll do it. That works. So are we going to do the the top one? Yeah. Do you think the regular people will be able to do this? Yeah. Okay. I mean, I'm a regular person. And this is the first time I've done it. And I think I'm doing pretty good, you know, don't discourage people. Yeah. So let me see. This guy, which is, it's time to reset your cartridge. So what you do is you just hold down the, hold down the stop button. Stop button. Just hold it on until it goes away. It goes away. Hold down your stop button and it should go away. Oh, it's up. I'm sorry. It's this guy. Sorry. Got the wrong printer. Wrong printer. Sorry about that. Okay. Now I went away. Okay. So it was the top printer. Yeah. Up here we feel it will still show the low ink level. Okay. Until it comes to this error. Okay. So lots of people ask me like, what I do is I'm still low ink. Just keep printing until you've got this window. Okay. Just hold and then hold down the stop button until the windows go away. And then it will print forever. Okay. Yeah. So the bottom line is all good. Yeah. I can see that. So we're still waiting on a color one, but we had that little error. So we took care of that error. We just pressed that stop button and it should go away. Wow. What did you know? It got unplugged. Yeah. Look at that. Nice and pretty. Okay. Let me just print two more pages to impress people. So two more pages are going to be printed just to make sure that it shows that it's working right. The test print here. It should be the same type of yellow coming out on it. You can see from the shadow, but it looks pretty good. It looks a little dark though. Not so bright. It might just need to be a little bit cleaner because you see that one printing again just to make sure that that cartridge is clean. Okay. You can see the bottom bottom black is a new ink canal. Yes. So everything looks good. Yeah. The top one, the color looks good. Yeah. So you can see the colors. Okay. All right. That's it. I hope you enjoyed this video. Visit us at PCHTechnologies.com or locally at Gwisprud.com. Thank you. Cheers.