 This is a brief introduction to some of the advanced features of your IDCoreBeam. IDCoreBeam allows you to control the perceived width of the super wide stereo sound of music playback via Bluetooth, MP3 line in or USB audio input. Hold down the tap button whilst adjusting the voice control. The width ranges from maximum super wide stereo sound to standard stereo. This setting will be saved and will be recalled each time you power on your IDCoreBeam. The playback volume of your music is primarily controlled by your playback device, but IDCoreBeam allows you to fine tune this with an additional trim. Hold down the tap button whilst adjusting the volume control. This affects the playback level of audio via Bluetooth, MP3 line in and USB input. When recording via USB, IDCoreBeam allows you to adjust the level being sent to your digital audio workstation regardless of whether you're recording to PC, Mac or iPad. Hold down the tap button whilst adjusting the gain control. This will allow you to cut or boost the USB output level. IDCoreBeam also allows you to fine tune the rate or time of your modulation and delay effects in addition to tapping in the rate. Hold down the tap button whilst adjusting the effects level control. The tap LED will react in real time to display the new effect time. For more information on these or any other features, visit www.blackstaramps.com and download the IDCoreBeam user handbook.