 What's up, everybody? I'm hiding Hopefully you guys can hear me and see me. Okay. I'm jumping right into this one. I don't want to waste too much time on this Easter weekend What's up? This is a monster box by the way Overweight it says overweight Hopefully you guys can hear me and see me. Okay. Let me know in the comments. I Got my Non-sweetened iced tea here. Let's see So get some people in here, but I haven't seen any new comments yet. Oh new comments. Hmm. That's odd I'll jump into YouTube's and see if I see any comments there Made it see you fine. Somebody says Hello Pop out this window There we go See if I Andrew Rogers for the little guy Easter treat fund. Thank you so much. I think you get a dancing taco here in a second I love it. Send it. Everybody's saying good. Good. Good. Good. What is um? Thank you so much Andrew. I appreciate that. We have a nice nice day playing tomorrow. It's gonna be fun What's up, what's up? I I'm excited for my X plus three to come awesome. That's not a prusam k4 boxing. No, it's not P1 P want to be nice. Well, let's find out. I'm not gonna waste too much time. We can jump right into this thing I don't want to burn too much of your Saturday and I have a lot to get done We have family coming over tomorrow and you know, I gotta get get the house ready Jim versus the box. Yes. Yes Uh 3dp UK. I remember that time. I remember that time So this is uh, this is the a cheat tech X plus three. There it is Andrew Rogers. Thank you so much. Thank you. Thank you. Thank you I'm just gonna lower this bad boy down So at a height where we can see in the box for one I'm gonna get this bad boy going I'm gonna see so something I found interesting. Let me let me tell you this This came completely wrapped. I cut off the little ties. I cut off all the wrapping and this box was open So I did not cut this box open I have not looked inside of this box or anything But when I got the plastic wrapped off of the outside of it, it was actually open like this. So Yeah, we'll find out what we get right Finally a dancing talk. I know that took forever Let's see. So let's let's pop this bad boy open I'm gonna get this thing out. I'm curious to see how it adds up, right? so we talked a lot about in the last almost a year about You know other printers that came out that were very fast and Now everybody's kind of jumping in that bandwagon and we're curious to see how this adds up right away Who there's special paper for? build plate leveling Interesting So I'm gonna take that off the top like that. That's right in the top there I have that I had that printer as well. I actually gave that to a school Boris My ex mate there by I mate s or something like that. I did I give that to a school So this is a 16 gigabyte SD card 16 gigabyte SD card Yeah, the school's digging it they're printing with it and loving it. So I did have one Also have a Another one over here that I'm giving away to a school soon Soon as he's ready. All right. Here we go That's what we see right away inside the box So many boxes. All right So it looks like this is the front of the machine if I have to guess Everything's kind of slid packed in here. It is loose So that's interesting But you know, I'll take it out right away. We see on the top looks like we have some filament a spool holder some cables tools and a Ordinary hotend that's optional just ordinary though. It's an it's an ordinary hotend if you can see that Interesting This looks like it's going to be a dry box for fulfillment, I did not watch anybody else's videos by the way, I Didn't watch anyone. So I saw a couple videos came out last week And I didn't watch any of them because I wanted to be surprised. So this tells you how to Looks like it's a dry box So it tells you how to do it. It is not active meaning I don't see power anywhere Which is okay not the end of the world there Nice Looks like you put some desiccant down in the bottom here if I'm guessing This is all guessing because I haven't I haven't looked into it yet some PTFE tubing Happy Easter weekend if you celebrate Easter You guys let me know in the chat if you're going to remerph as well I'll be there a couple a couple weeks now. We'll be at remerph today. That'll be awesome. Hey 3dp UK $10 super sticker. Thank you so much. I appreciate that You are awesome Thank you. Thank you. Thank you. So we got some more styrofoam in here Get the camera with it. Don't worry. We got the looks like the cover for a top. Okay, so this is like a removable dome I want to go with that. All right, let's set that over there I don't know if I can get this piece out without Taking the printer out. Maybe Let's drop this bad boy lower, huh? Drop it like it's hot Beautiful thing about this desk do these work as well as active dry boxes I've used neither but uh, but with this machine and materials I'm going to be printing I will need to I Cannot speak for this one. So literally it looks like Tupperware It appeared to be like a press seal. Yep, so I would say it's definitely pretty close to Air tight with the exception of the big air hole here Where your ptfe tubing will be but this does have a seal. It is nice and thick as you can see and With a bunch of desiccant in there. I think it would probably keep some stuff dry for a bit Especially when you're just actively printing with it All right, no remerf, but I'll see you at mirf. All right music dad. That's a deal Let me know if you're going to be at remerf Here we go I'm really pumped for remerf. It's going to be a lot of fun and they've given me a microphone so There is that I don't think this is coming out without A different way here. So I'm going to leave that in I'm actually going to attempt to get this out of the box um If you want to join me in that I don't have glasses on today by the way It's I feel weird. So My little guy been taking him to swimming lessons and swimming lessons got over um Not too long ago And I forgot to run home and put my glasses back on I have my contacts in Because I don't want to take my Glasses in the pool So I threw contacts in and then I forgot to switch. So there's that There is that Um Thank you. Thank you. Thank you All right, I'm going to attempt to get this out of the box somehow This thing looks like it's a huge machine. I might um Um This is the top I can see that it's the top And I don't know did it tell us how to get it out. I don't think so No I was gonna I was thinking about Tipping it and sliding it out right and then it would be on its side And I don't know what's on the side of this thing. So Before I do that Let's see if I can See I can do this Handles all right. Someone says there might be handles. I like it We're gonna see if we can find them I better That'll be much easier Not there I mean those could be potentially handles From what I can read without destroying the box. There's handles on the box for sure Um We're gonna do this Look at that There is something that resembles handles on the sides and we'll take a look Nothing else in the box just a giant box So there's that Well, let's let's not hit the camera all right Move this back up to this level So there it is it's out of the package. It is wrapped with the exception of the top like we saw um The top has the giant hole in it because that's where they packed everything But Let's see what we can do here So it looks like I'm gonna cut this is what it looks like. There's tape down here There we go So, yeah, let me know If you guys have seen this printer on other channels You probably know more about it at this point than I do. I literally like to go into these things Most most of the time I like to go into these blind Just like somebody who would just get this for the first time And not know anything about it So there's that Whoo, that's a lot of noise. Sorry about that A lot of plastic and there's more plastic Let me get this turned around so you can kind of see There you go. Let's see You could cut the box corner. Yeah, you could Uh Ooh, how's it going? Healing fast Yes, not sure There we go. Okay So So I pulled the plastic off. This is but it's like it's like a bag, you know Here's after service sales So this is like a plastic polycarbonate something kind of door And this apparently is how we're going to get that out Boom A little bit of shipping material in here still I'm willing to bet they're going to have me cut the giant zip ties that are in there I'm going to try to do that so you guys can see it. There's one I really hope this is a good printer to be honest. I think Um, competition is good Um So we'll see I really do I also promised this printer to somebody already And if it is working good and it works good I'm super excited to give it to That person Edge of toaster ovens. Yeah Yeah, yeah, that's kind of Kind of it's kind of rocky That's not my bench. It's actually like a foot. Maybe there's something under the foot but Yeah, welcome to my this is my new oven You know So from this point I think it's safe to say we're gonna Attempts to We're gonna have to cut some more stuff Cut it up There's uh stuff in the top here I'm gonna cut that with you Watching if I can Look right here A little top down I expect profiles to be tuning. Yes, I expect that as well There is Something to be said about Uh bamboo lab They put a lot of time into their printers. They put a lot of tuning into their profiles Their slicer. I I really like the slicer If you guys have one, let me know what you feel How you feel about that but I really like it It's easy straightforward A lot of flipping cardboard here This thing is huge There we go There we go Now they do have a this does have a bigger build surface Then uh Then the other bamboo lab printers do so there's that All right Let's throw this in here All right There's like a lock on the front cover Interesting So let's get out the instructions to see what we got to do I can care about bamboo Nice Let me turn this around so you guys can see it's pretty face here Bed looks smaller than I thought I think it's like Let me double check the size on it for you It is 280 by something I believe Oh Nice color manual They tell you to don't be a dummy and change the uh Change the um Power on it so that's good So it is Don't tell me come on That's funny On the back they have all these stats And that's not one of them Oh here we go Here we go 280 by 280 by 270 280 by 280 by 270 so this is the manual It's actually Like pretty thick and really nice paper Nice color photos And the back two pages are like You know stats and stuff too this one and this one So yeah, I have to guess the bed. Yes. Yeah. Yeah. Yeah. All right So we've got a lot of stuff that comes with it um Points out where everything is We're going to flip the uh Right now i'm going to flip the power. It's um Somewhere I thought it was right here on the back Guess i'm going to look for it. I wonder if it's underneath Let's Yeah, this this hard thing is I just got out of a pool recently and my um My hands are dry. Here we go Let's see Switch the voltage To the country you need to switch Voltage to your regions. It looks like there's two power supplies underneath So and I believe we have to do that underneath So buddy you're getting laid down Interesting check this out I'm doing it This is happening This is the bottom Look at that Turning around so you guys can see it So we got uh two power supplies here. We need to make sure both of them are Uh set for your country And they are both mean well power supplies it looks like maybe Maybe not So this one's a mean well for sure This one i'm not sure The logo is not the same and I can't read What it says it is but this is a mean well Not so much that I can see on this one very similar It might be maybe it's just a different logo here But Yeah That's interesting, huh? I'm jealous of the new table. Thank you. Thank you Um, hey, hey, hey scratching that nice new table. Hope not But that's what it's for right to use Gotta use it. Uh, oh, where's the little switch on this one? So mine are both at 115. So that's good But it's nice to see underneath Kind of cool little feet here Everything else is kind of up here. You got your belt system interesting That's what the table's for Obviously, I don't want to scratch it but hey You know what? It's for science Can we get a look at the main board maybe I don't even know what it is on this thing to be 100% honest with you um Let me think about that. Let me get it built and go from there Because I have to I'm guessing I'm gonna have to pull the back panel off because I see that's where the wires are going Uh, shouldn't be that big of an issue But let me see how let me let me let me let me see give me a little bit um My hands are so dry Swimming swimming lessons, you know Or to climb on yeah Let's not do that anymore, but it was it was good. All right, so I switched it over now. It just says uh plug it in And complete the unpacking. So I already completed the unpacking I prefer to unpack first then plug it in in case it turns on and tries to move all the stuff Cut all of the zip ties we did that. Oh, there are shipping So in this one there also are shipping screws in the bed So I'm gonna have to do that for that. I'm gonna turn it So I can see it There's the back of the machine there and I'll give you guys a top down view In a second. Oh, I see Remove screws. I think it's the top ones You can't tell me Maybe it's the bottom ones It's some ones This is interesting. It says remove screws and there's four or two in each, you know two in each thing so Let's see if I can I think it's big Get a little light in there. Hopefully you guys can see in here Let me know if you can't I'll grab another light um And we'll make it easier for everybody to see so yeah, let me know if you cannot see in there I'll grab another light Use nerdy jays less nerdy without the contacts There you go There you go That does not fit So I don't know if it's this top one here or the the bottom one. So I'm gonna go with the top ones first Hopefully you guys can see there are still zip ties left to cut. I hope not. I thought I got them all Oh, I see them. Thank you Whoa that That is a screw Let me get another light. I feel like you need some more light up in this Up in this business you know 280 by 280 uh-oh That one's not gonna work because I left it on oopsies grab a different one. Maybe Where did I just put you lights? Man That's awesome. I just literally had two lights in my hands Of course the studio is dark and I can't see any of them now We're firing it up just for a second Fired up Another round of shots I have no idea I just had that my other two lights in my hands right before the stream and now They are gone and as soon as I You know, it'll happen as soon as I stopped the stream. We'll find them It'll be right in front of me but It's all good. It's all good Anyways, all right, let's rock and roll So someone said there are more Zip ties and you're right these screws are huge So I did see a bunch of people doing or a few people doing videos On this which is great Um inside here I see A giant Looks like a fan like the bamboo lab printers have on the side Well, I'm throwing throwing a wrench throwing a wrench I see Um Mostly plastic shell So there's that Now this this whole thing is yeah, there's there's some metal in here. There's so then, you know what? There's some looks like a metal frame in there Okay We get my snips here. There is a couple of zip ties I missed Um, now I see what's happening. There's one right over here At least one let's see That might be good now All right Well, hopefully you could see any of that If not I suck flip this thing back around There we go So I cut the zip ties I pulled the uh giant screws out. Hopefully I pulled the right giant screws out Hopefully there's just I'm really hoping there's just four Because there's actually Six screws, okay move the front cover Uh, is there any other instructions like did I miss something here? Cut the zip tie. Oh, I did there was a page stuck. I was like Oh, I lied. There's not How to clean the x-axis? Yeah, that's it All right We're firing it up. I don't know anything else about anything else because they Their instructions don't tell me As a new user to do anything else besides start up the printer Or plug it in completely I can completely unpacking Change the power supply voltage uh Cut the um zip ties and then Unlock the head that's it when I go to the next page. It just says x-axis cleanup tells me how to remove the Show I mean, there's no there's no other instructions Uh, I do think someone said there was something under the bed. It's monsters Ha ha So there's nothing about Installing the spool holder In their manual. Okay, unless I'm I mean unless I'm missing a complete and my There we go. These are so dry Unless I'm missing complete stuff here Nope There's chamber heating fan. There's a transparent cover Tells you all about the stuff it just doesn't tell you anything about how to use it um, so with that being said let's uh Plug it in I guess we could open this box. Let's see what's inside of it I'm going to leave the cover off the top so we can get some Better camera angles when we're doing anything Yeah set up After you start the printer yes I imagine that's true but like If you're brand new into 3d printing and you get a New printer like this You get it out of the box and there's no instructions on what to do with this You know what I'm saying? like g-tech filament 500 grams We'll see what color it is in a minute. Do we want to guess on what color this is? Does it tell me does not tell me what color it is, but I can tell you it's ultra abs. Holy So it's abs. What is what they gave me ultra abs? All right, um, we have some We have some Uh-oh I just froze didn't I Get out of here crazy, huh? Oops Hopefully I'm back That was odd um So we have some let's see zip ties zip ties. Oh my gosh. I'm losing it. Um Well some ball end allen wrenches We have another hot end here with wires and plugs Doesn't look familiar at all does it? There you go Nice A flathead screwdriver a needle To to clean out clogs and I appreciate this I appreciate you putting the needle in something that cannot poke you I've been poked too many times by stuff. That's like needles that are free floating in the bags and stuff Um, this is awesome A wrench Some screws a fuse that kind of stuff a spool holder I'm guessing where this goes because I think I see where it goes in the back. Uh, we have a Um network cable a power cable and Whoa a little shorty spatula Thank you for not saying anything andrew I have not watched anyone's stream or anything on this one to be honest None of it I am interested in what I mean like this is pretty ambitious Brand new into 3d printing never printed before and you're going to give somebody abs um, hey man We're going to print with it and see what happens so There's that A spool holder. I am guessing we'll clip on the back here somewhere um I mean Please tilt the dryer box. Oh, they want you to put the whole dryer box on the back. I see So you can either use the dryer box or a filament holder Uh, let me flip this camera around here so You can use their drybox if you want to Or on the back over here It looks like you can clip in a Clip in a spool holder too that I mean, I don't know if it goes any lower. They're farther than that but Here we go. So Okay, then I'm guessing it feeds into here and goes up Looks good to me Let's do it Not a not a huge fan of not having good instructions on printers For me, it's not that big a deal. But for somebody who just got this thing Doesn't know anything about it You know That is a big deal If you've never printed before and this is your first printer, you might be a little confused Um I'm gonna turn this So if I do that, you won't be able to see. All right Firing it up. See what happens Here we go Super chat. What's up? Kyle what's going on The spool can go inside the machine or on the top Huh? I don't think so I think there's a it can't go inside the machine But you can go inside the drybox that they gave you like this and this clips onto the back as well And and there is instructions on the back here on how to put desk hint in And uh put it on the back etc. So there's that So it looks like it booted up. I can't see the screen from here. So I'll probably come around and You know see what's going on This thing is big. Yeah, definitely a big The the build space not so I mean, it's not huge but but the printer itself Kind of reminds me of a you like a small oven All right, so you can choose english or whatever language you want tick out top cover I think we did that Remove the zip ties. All right. So so this is a little better. There's they're walking through the instructions here I'm feeling that Uh Next remove the four screws. It was the ones I removed so that's good Okay, I like I like that, but they didn't tell me in the manual To look on here for your instructions, right? Well, maybe they did I have to look again Okay, it's unlocked moving the platform now. Let's see if you can see that Everything's moving up there It's like pei or some sort of pei sheet So someone said there was ship locks on the bottom and it looks like on the screen here. They're telling me to take them out Thank you for that So and I do that more foam And these these shipping locks it's hard to see Nice Okay Nice Next Please wait for the initiation of platform and nozzle. Okay We're waiting for the initiation of platform and nozzle Move it over so you guys can see it Get this out of here Let me know in the chat what you're drinking. This is my uh burger king On the sweetened iced tea The front door looks thick. It is something It's very light it's definitely thick material like acrylic or something polycarbonate maybe But it's you know It's what it is It's doing its thing here I'm very curious about what this special bed leveling sheet is going to be because You know I'm not used to having to do that Let's see So that's what we see so far right now Not sure what it's doing, but that's a top-down view if you guys want to see that here Get you a little better view there It says calibration. Oh now it wants me to calibration So i'm gonna leave that top-down sheet on here It says use the up-down buttons on the right to adjust The platform height and make sure the nozzle is just touching the leveling paper so that there's a little resistance between them And then click the button Below click the below button. Okay So This is our z-height This one's very far away no idea if it's moving or not Doesn't appear to be There we go So I think that's solid next Am I gonna have to do this for every Okay I was gonna say do I have to do that for every point? That would be very sad But it looks like It looks like you did that once for your z-height And now it's running through the leveling sequence So something I noticed right now When this is all the way in the front you see did you see that this chain was pulled so tight When this was all the way up here the head was all the way up here The hot end this chain was tight like literally tight I'm hoping that's hoping that There's gonna be an issue All right, let me look at some comments Their bed leveling sheets are thicker than paper um Carbon lemonade water beer Yeah, I like it all. It's a panel front panel removable. I'm not sure. I'll look Pepsi and water Kyle Pepsi and water. I hope I hope like op like not at the same time um 1980s microwave. Yeah Their bed leveling sheets are thicker than regular paper if you ask me my experiences paper I had to be pretty close to the nozzle with their special Yeah, I'm going a little little deeper than they told me to go on that banana milkshake. Ooh Banana milkshake sounds really good right now It does it's It's plasticky a little bit Can you show the abl screen at the end? It's going to have a grid with various points. Sure. Let me show that Pepsi separated from water not at the same time Good good good good Um, yeah, I can definitely show the screen at the end. There's going to be a grid Someone said I'm taking your word for it. Yeah, there it is whoo Interesting let me fire up this camera here. All right, we're going for a ride Here is your screen as requested and you can see in that this quadrant is man interesting uh you know Definitely interesting that it would be such a huge big different number in that corner I mean you're looking at Quite quite a change from this corner to the bottom right corner But hey long as it works. I don't care Tells me that these bed is probably not flat Or the platform or something Yeah So let me throw this back uh over here and now my back is in the camera So it wants me to hit complete. I'm going to hit complete Uh now it's going to run input input shaper There you go leave that open for you so you can see it Hopefully see it. You want the top down? Yeah, let's do this You guys can see what it does there Pepsi is let's see Pepsi is so much better than coke. Ooh. Ooh. I don't know about that Uh The abl is kind of slower than me. Um, it's a lot of points a lot of points um Pretty big or a tech had much worse one seven. Wow Wow, wow, wow No ice I don't do I don't do ice either a lot in my Pop Did you have a look under the bed? Are there leveling knobs is the bed made from plastic? Absolutely we can look um Let's let this run for a second because I don't want to disturb the piece to be honest and I'll let that run for one second and i'm going to step over here and This thing is rocking. It's doing the whole vibration Input shaper compensation thing Um Just need to step over this way for a second Where in the heck? Right in front of me. I knew those lights were over here Both of them literally right where I looked last time, but they were upside down so I couldn't tell they were here That one plugged in All right, I'm gonna I got a light here so now I can um We can take a look at that bed now I'll bring over the gopro While it's doing its thing definitely plastic a lot of plastic In this thing But this will give us some good light here Um, not that one because that one is also Dead, but that's okay. I have one Let's grab the gopro You probably hear this thing doing its input shaper thing Hopefully you can see what's going on here. Someone asked me about under the bed so this is plastic A lot of plastic up in here That's what it looks like Hopefully that helps And it's doing its thing here You're probably hear it in my microphone some parts of the UK Colors Boop There we go Let me two seconds here Swap I wonder if the whatever pre-sliced stuff they have on the on the uh bed is set up for this ABS it came with Really? Oh, it's still in one piece. Thank you Regardless seemed ABL worked on larger prints. Maybe z banding effect. Yeah, nice Room temp iced down over iced down soda No go on the meltdown so There you go um Pop yes, oh fizzy. There you go Out here. Uh, what where I'm at a lot of people call it soda Not so much me I grew up in the western side of the US and it's pop um Seven up in spite are different in most places, but sprite I like better I love the discussion here. It's great Then using this machine 3d print sos been using the machine for the past week enjoyed it It's not all rainbows and pink lemonade, but there are a lot to like so far looking forward to your experience. Thank you 3d print sos. What don't you like? What don't you like so far? um Soda or coke there you go I look different without glasses. I agree um You know, you could probably do it in 10 minutes. Uh, maybe 15, but I I mean I'm talking to everybody and all that Facelift for the ifath. There you go. All right. I think It might be done. I just can't read the screen from here unless it's still Vibrating at a high frequency. Let's look Nope, it's still running a lot Oh saving now So the screen's not bad right in the center there um So it wants me to load filament in and then keep pushing until it reaches the extruder um, okay Sounds good. We can do that I'm gonna take your handy dandy Flathead screwdriver that you sent me and I'm gonna load ultra abs So that's what they gave me I'm gonna stab it in the center. All right before I open this in the chat real quick What color do you think this is gonna be? I know most of you guys have seen the other videos, but I haven't um I'm doing good cat 3d. How are you? Have they moved to the usb stick location? I don't even know where it is yet. I didn't look to be honest So that that being a hundred percent fair. I haven't looked my guess is It's right here Right in the top Top rear of the printer white gray black red green Fine, I don't know what color fine it. I'm just joking uh Ooh Whoever gets black you would be right. You are the winner With some ultra abs It's not just abs it's ultra You know what? I bet you that was a reusable bag. I just stabbed the crap out of Let me know in the chat how many times you've done that Where you don't realize it's a read. Oh, it's not. Okay. Nope. Maybe it is. I lied. It is a reusable bag No, it's not it's just sealed It's definitely not a reusable bag. All right. Let me know in the chat how many times you've done I've I have opened them not realizing they're reusable And definitely 100 percent I've done that So I'm going to put this in the back you guys want to see this I mean it's riveting loading Well the filament's riveting it just broke Jesus Definitely not flexible filament. I'm going to throw it out there right now I'm just trying to put it into the side of the spool here so it doesn't come loose on us And it literally is just snapping off, but I can turn this Throw this over here and give you guys a view So what they want me to do is put the spool here like so push filament up through here and I'm going to cut this because That's what we do We cut filament at a nice steep angle I push this in I did not put the drybox on here as you can see So I think I'm at the extruder. I mean it's not pulling anymore. This is an interesting angle here. See this right here If you don't use the drybox it's a interesting path here unless uh You know they did include a piece of ptfe They included a piece of ptfe for the drybox here. I think I like this idea better Just not a fan of that. It's kind of a steep angle into that Can I pull it? Yeah, I can 100 people here. How you guys doing? So I'm going to push that up in there And then I'm actually going to use this Because I would rather this angle here and it slide through the ptfe Than to have it steeper like right here without that ptfe. Oh, let's see You like that? All right, there we go hold it in I pushed in it's not I'm not using the drybox at this time. So there's that You saw me. I pushed the ultra ultra abs in so Now what let's go look at the screen broken uh Okay, click the left side plus button to start heating up the nozzle temp. Okay. That's what it says here what to If you were never saw this thing before For one, I don't know what language that's in But that's not english but I don't know I just hit plus once And it went to 243 I just touched plus one time and it went to 243 Okay It's going pretty quick though Andrew Rogers 10 bucks. Don't forget about Don't forget to smash that like button. Thank you so much Andrew Rogers Much better angle Thank you That's why uh, let's see Same wise in there six Ordered the x max three I wish bamboo x1 had a larger build volume. You never know Andrew Rogers five bucks super chat. Thank you so much. Thank you So i'm just waiting for this to get up to temp here. It's still climbing 237 240 243 There we go Ensure the filament is in the strutor click the button below. All right. I'm gonna I'm gonna uh ensure the filament Ensure the filament into the extruder Click the button below for loading filament until filament comes out. Let's go ensure my filament is into the struter I don't feel it pulling This heads up I definitely smell the abs though, but I do see extruding in there So there's that Okay Cool against my better judgment. I'm gonna reach in and grab that and Andrew south the council of the andrews has come to support a second andrew rogers comment. Thank you so much You guys rock Council of andrews it's been a minute since we had council in session here Uh guide tutorial finished That's all that's it. All right. All right Now we see what we got here I believe they said Let's see Is there anything under this? I mean, this is abs. Do I need glue stick or anything? Nothing that didn't come with this by the way no glue stick in the box They didn't give me anything else here that I can see Nothing special Andrew south again. Thank you Nonstick whoo. There you go. I wish I was an andrew you can pretend you're an andrew And if you donate now you can be welcomed into the temporary official honorary council of andrews. How about that? um You need Yeah, I probably do need the door shut, but I didn't want you know I wanted you guys to see and then the hood On yes, so boom. This is the sd card reader. Uh, it's kind of hard to see But if I take you on a journey It's right up here sd card reader So that's what we're looking at So I have plugged it in. I'm gonna I'm actually gonna move this over a little pal Darn it. You know what? We want to see this thing moving. So let's Keep it in front of that camera I want to make sure you guys can see this thing rocking whatever it's going to do. I don't know what it's going to do yet I Ender three two days ago. Awesome. Congratulations Um, I'm going to the screen here You guys want to see the screen? I'm going to bring you over and check out the screen This is kind of a weird stream because I keep Moving all over this is a big printer though So there's your screen core x y 20 Millimeter 20 meters a second. It looks like based on clipper. It's got a heated chamber according to this and It tells you that it's a core text a 53 one and a half gig processor on board There is a chamber fan. You can turn off and on here looks like you can turn off and on some audio Looks like there's some gcode whatever that is Looks like you can move some stuff around calibration You can set it up on your network I'm in english so, um Legs, I don't know if they're liftable. I'll check that because it definitely feels a little bit rocky So I hit that button and it doesn't show it's not showing me anything. What is it? Let's go back That's not going to help us I mean it's gcode, but it doesn't show me what it is 40 minutes worth of gcode. I have no idea if this is for the abs. They gave me um Yeah three print sos. I missed if you said anything you didn't like already, but um Here's a here's a question. Whatever gcode was on that thing. They gave me abs to test, right? Is this gcode? Is this gcode meant for abs? We're going to find out because right now I guarantee it 200 degrees celsius. It's not going to print that abs good Right, so there's that maybe that's what it is when it Starts. I don't know. We'll find out in a minute. All right We'll jump over here just for a second Yeah three print sos sounds like you had one for about a week Let me know how that's going. I mean you said there's some definitely not perfect, but Good points. That's great Um I can't see it because it's black currently. Yes G code didn't work for me. Not sure what it is. I really hope it's not trying to print right now is what it is It is trying to print right now That doesn't make any sense to me none Because this thing is only heated at 200 degrees and I'm You had me load They had me load abs in here, you know It doesn't make any sense does it I'm raising the temp volume right or the temp right now, but Not a fan of that I'm raising the bed temp to temp bed temp was like nothing Um press the plus. Yes Exchange to feel like I could but hey I Love that. Hey, listen. I mean like honestly I I want this thing to work as good as anybody else does. I really do But if I was brand new this was my very first machine, right? Never had a printer before You give me a roll of filament. You put a test model on the card I got it set up We got through that and the first thing I want to do is test. I want to use the model on the card to test, right? And it's clearly set up for PLA at 200 degrees, right? We know that but An episode of home improvement kind of it just it's frustrating like either either include abs, which is great If you want to and include A model to print an abs or say on the model Hey, this is for PLA or abs, right? I'm hoping it prints great. I I told I have a good friend of mine Who who needs a new printer wants a new printer to Something faster than he has and I said if this thing prints good, you can have it So it's not That's my first note said I wrote on the machine. Give me a model for the filament that's in the box. Amen Amen chinese printer. Yes I Missed that show. Yes so it's doing its thing it's it's printing It's doing the first layer now I'm thinking it's gonna work. I mean we'll find out I raised the Temp up. Let's drop. Let's see. What did I just do here? Well too much too much It's hard to see right now because it's printing black anyway but I'm just you know, I got to look at it like Not, you know, there's gonna be several people who get this for their first printer And no one's gonna know they're gonna say it prints like garbage right out of the box because the model isn't set to print What comes in the box? I can put the top cover. I'm not putting the top cover on you guys won't see much if I do that The top cover is here No, I uh, it's printing I I raised the temp I raised the temp. This is your top cover. Everybody asking about But if I do that the camera kind of gets defeated here If I do this now, it's gonna look like garbage But It will warm the You know chamber up now. I did not turn the chamber heater on While we're messing with this I might as well jump on and find me a Uh, get the slicer and get something actually sliced Forgot how much I love the smell of abs That's a joke by the way I have not printed with abs in a long time. I just I know I just don't I suppose I do like the idea of the spool holder on the back Um, I like the idea of the chamber heater This does have a chamber heater Um Has like handles on the side So we'll see how it does with the move like that Oh, can't go too much more. I guess I need a longer cable Um That was close So we're gonna let us do its thing. This thing is pretty slow currently But while we're here, I'm gonna grab Let's go out and grab The slicer, you know what that's interesting. I can't really do that It's probably on that sd card and who knows if they have The have profile yet on the one that's out there. Well, we can go look though I could we could stop that PLA PETG um, I've been printing I've printed a lot of that, uh Um carbon fiber nylon is great Top camera is okay. What's your filter choice? Let's see The tweaks in their profile, uh in their own slicer printing is great abs fast and smooth nice We can see from the top camera nice Got to run the Costco. Awesome. Have fun at Costco. It's not doing anything special right now. You can see it's not printing fast Uh, maybe those maybe they'll kick in. I don't know we're gonna find out um Works with x plus three these profiles for all there's profiles for all materials. Let's go look Let's go dive in here There we go Already going a little faster now You can probably see it Being being black. It's hard to see currently anyway um what it's printing but Cheedy print slicer Uh, there is firmware That's interesting. It's updated on seven four twenty three So it's going to be updated in the future just a heads up guessing they meant four seven twenty three Which was yesterday I think we should probably check out the new firmware And there's a video on how to do it even whoo on zip okay Put the sd card in Okay, go to firmware And let it run. I'm guessing. Yep. That's what it says to do We can do that might as well get the newest stuff going soon I'm gonna go back to the slicer download Downloading it now. All right. I'm downloading the slicer too. All right. Let's see what we're saying Runs cluper has a fluid Front end nice. Thank you, Andrew. What's the price? um Let's go let's go to their site. We can show that Why not? x What we got here x Plus three x plus three There we go. Let me uh, let me just drag this down here. I'll share my screen with you guys Oh, you're not asking about this, but that's okay. We're gonna look anyway Window there we go Boom here we go This is their uh site here. It looks like this printer currently is 799 U.s. Right Shippings check calculated that check out Looks like available in the u.s. Uh ship 72 hours after orders placed It's a pre-order It doesn't say pre-order anymore. It's available in stock in usa is what it says We come down it tells you a little bit about it. It's supposed to be 600 millimeters a second bigger than bigger than bigger Just a heads up. This is bigger than bigger 280 by 280 by 270. It's a high flow 35 millimeters High flow. I'm guessing hot end acceleration Um 20 000 millimeters squared Core x y it's got clipper Uh cheat high end extruder with high performance material 64 bit processor There's the interior structure With uh tmc 2020 nines lightweight hot end That is what their extruder looks like. It's a nine to five one 9.5 to one if I could read that right year ratio Supposedly these are 15 minute 58 cent benches or 58 second benches. Why not put this on the sd card? That's what you need to do Two sets of hot ends There you go two sets of hot ends Both are 350 max, which is sweet. Uh, there is a controlled temperature chamber and drying box. So Yeah, so you can heat your chamber up, which is cool. It does have a separate power supply for that um We haven't tested it yet, but we could No layer separation I'm guessing now because of heat chamber heat is what they're saying Warping compensation And nice Automatic leveling Flexible hf board Okay, cool. That's that Yeah, uh, yeah, I mean they want to be an excellent, uh carbon competitor. I would say that that is very fair It doesn't everybody want to be um Yeah, excellent for the price It as long as it prints good for 799 plus shipping You know, if as long as it prints good, it should be um I'm not sure what the facelift the ifast will have but that'll be good if they do For that price, I would choose the p1p. It depends what you're printing be honest I don't know how this thing is going to print but if if you're printing abs and stuff like that the p1p is not enclosed so um You'll have a better time and in the printer like this with abs high temp stuff because you're going to heat the chamber as well If you're printing pla petg Ah, I don't know tpu that kind of stuff the p1p is great Thank you so much through your print s os Once you get the slicer, you should be set it prints great on presets. I'll tune in for the rest later. Thank you Have a great day. I did get the slicer what time we got we got some time left let me jump into my um Set up here I'm gonna run the setup for the slicer and we're gonna We're gonna get this thing installing Then we'll throw something on there and see how fast we can get it Doesn't use proprietary hardware if not If not, that's a win for the p1p. Uh, if not win over the p1p. Um I believe so I mean the hot ends are not any It's over there. The hot end is not anything They they developed it. It looks like the extruder the same Um, it's using clipper though. So there's that um You know a lot of this Stuff like this that comes in a box is I think a lot of it's gonna be stuff that is made for the printer itself But doesn't mean it's not open source or whatever it is clipper Yeah There you go That says in the book that don't mess up the rod that cannot be replaced The rods cannot be replaced says that right in here when it says to clean them Or when you clean them don't mess them up. They can't be replaced so It's printing a box I think i'm gonna stop it and uh, oh, yeah, I was gonna install the slicer, huh? Did it ever I don't know if I ever saw it pop up here Give me one second Let me know if you have any questions about this thing. This is the uh cheaty um Here we go. This is the cheaty what x plus three brand new I just came out like a week ago or so ish and I cannot see what this says Oh because that I couldn't see it because there we go um You know First thoughts initial thoughts out of the box. It looks nice plastic um Does have a metal frame it clean, you know, it says it has a metal frame and Oh, let's see Perfect. I'm just getting this the slicer installed here while we're talking at the same time Let me put this down here We get you guys back up on the screen. There we go. So, um You know it is It doesn't look like an abs bomb. No, it's not it's a it's like a square box. I'm gonna stop it here in a second um But anyways, yeah, I mean plastic one thing I didn't like is that the model on the printer that came on the sd card is not set up for abs And that's what they sent us. So there's that Uh, excuse me does run on clipper I'm gonna hit stop. I'm gonna confirm that I want to stop it. We're gonna let this thing cool down I might have to get the slicer off the sd card if the slicer on the um On the Website doesn't have this yet Just getting it installed now We're gonna find out So this done it's cooling off um I mean it looks like it went all the way down It dropped all the way down Move this over Yeah, I wasn't expecting abs in the box either Yeah, slicer on the sites up to date has all the new printers awesome while i'm installing them now I'll slice something else in abs and we're rock and roll it. I don't care It'll be a abs benchy or something probably not I don't But any questions. I mean like if this thing prints good, I think it's going to be awesome I want to see it print faster Obviously because that's what they claim. Um, it is abs though. Um, I like the touch screen on the front It seemed nice and responsive I like You know, I like the shell. I like that. It's got a heated chamber um actively heated chamber um It's bolted together nice. It does rock. You can see that so I gotta check to see if any of the The little uh pads on the bottom will screw out a little to stop that because I don't like that um Reminds me of a popcorn maker kind of Yeah, it's pretty funny Also true um I'm just popping up their new slicer now and it's opening It's taking its sweet time, but it's opening and Excuse me What time we got 220? I want to get this thing printing quickly and then You know, we'll kind of take some last questions and go from there. Um anything else. I mean I could probably use the drybox I suppose I could go through the process of unloading the filament and and trying to use the drybox quick um I do kind of like the idea of the drybox especially if we got the abs on there and um You know, here's that so Here we go So we got x plus three There we go. I'm just going through the uh Yeah Next tools great Okay, we have a slicer now We have a saw you guys want to see it? Of course you want to see it, right? Get back over to y'all 3d printing sos. Thank you so much five dollars for easter Thank you so much for the stream. Hey, thank you. Thank you. Thank you. Thank you Um, I haven't looked at the web interface yet. I haven't set it up on the network yet to be fair Um, what's the format? Do you know what? Let's look at the firmware too Take a look because there was a new firmware There was a new firmware I'm going to pull y'all over with this camera And see if we can find it Hopefully you can see that good Um network now calibration now So no Manual no maybe down here Oh about Oh, yeah my guess is That is two point something um I don't know what that button does So there's that but I think there's a firmware we can throw on a card We can reboot it Do I have to shut this thing down anywhere special or just shut it off? I think we will throw a new firmware on there Um good point on that as well I was gonna Just got to get the sd card out over here. I do have it downloaded So I'm assuming I can just shut this thing off So there's that so when I was on their website Here is a little video And it tells me to get the file Basically, it says un unzip the file Put it on the sd card Copy the decompress file to the usb. So the whole thing it looks like Put it on go to that menu And then there should be a button that comes up that I can press We're gonna find out Uh, one thing I did notice is that Where is the there's no poop shoot no poop shoot Um One thing I am noticing is that I think to file it down on The file it downloaded Is a rawr file Yeah, it's definitely a rawr file So I'm gonna have to I'm gonna have to unzip that I'm not sure why they did that maybe downloading winrar now because apparently They don't have it on this pc yet Like again, let me know if you have questions. We're gonna we'll update the firmware quick here. That's a good idea Um, knock that out toggle all toggle all again You just get to play with rawr files All the good stuff here I'm trying to find a stinking uh why It's definitely being nuts here. I uh, I want to close you About too many windows open here now. I can't even see what y'all was saying boom Yes chamber definitely smell of abs when I shut that out Um, absolutely it did Timers blowing up That means my time is numbered here. All right Let's see So there's a qd update folder I'm going to copy it I got it ready to go. I'm going to drop it on the fd card as directed in the video Um, there is slicer software in here as well, but we don't need that now Eject boom Got it right there There we go We're gonna flip this bad boy on and I'll flip. I'll bring you around so you guys can see it too A popcorn bowl absolutely, but we do have the slicer on too um Let's see if I can share that window It's on my small screen. So there's that So now we have the slicer and this is what it looks like So let me go around to the front. Let me see what this thing is doing That's ready for us to upload Bringing y'all for the ride here Oh, maybe there we go Okay, uh, we're gonna go here We're gonna click about And they showed me something right here, but there's nothing I don't know what that button does either so Yeah, they said it would be right here in the video I'll go back to the video and we can watch it to be safe, but Maybe I maybe I didn't put the right Maybe I didn't put the right files on. I don't know. Let me look Go back All this back and forth, huh? I'll show you So you guys can see support software firmware I'll pull you in in two seconds here plus three No, maybe not 206 version 206 is the newest one Oh, there's a 3d benchy on here using PLA There's test files on their website. I see them um But it is version two. I looked at I think I looked at the wrong printer I'll be be fair about it Let me just see 206 is the newest one and that's what's on there so There is that but I think Here's what we're gonna do They do have a speed benchy on on this thing So let's let's see how we Let's let's see how we reject filament Quickly maybe unload Press the side of the extruder to cut Click the button and then wait for unloading. What? Here's a button Let's a button I gotta do this every time or what? I'm guessing it's right here. I don't know if it unloaded or not. I don't know if I pressed the button good enough or not it's got to be up in there somewhere and Sure going with it Lots of learn here guys a lot to learn But I'm going to download this 3d benchy quick go some gcode 3 mf Let's just take the gcode download The max of the carbonate would be appropriate to put a little popcorn bowl Yeah, I looked at the wrong filament that that definitely is correct They're wrong for more. I mean Absolutely I did It's doing something Doing something Oh now it's going to try to retract now I don't even know if I I don't even know if I press the button on the side that it asked me to press There's that no idea what it's doing Made noises I don't know if I cut it or not unload Press the button on the side of the shooter to cut the filament then I think I got it now Go Just keep telling me the same thing to press it. Oh my frozen. It might be frozen Dang it Of course why keeps happening want to keep you on your toes. That's why All right Sorry about that All right, it says it's Okay, it looks like I cut it. I'm pulling it now I'm pulling out the filament It did cut it which is great I can uh attempt to attempt to store this old filament Without breaking it all apart. There's that Let me grab some uh PLA What kind of PLA do we want? What this kind the kind that's right here Looks like Jesse PLA limer green We're going to load this in I'm going to we're going to load up that 15 mini benchy file and we're going to find out Someone in the chat. Let me know if this is running clipper Do I have to shut the computer off or shut the computer off shut the machine down to pull the sd card out I don't want to just yank the sd card out if I can't Mini gym. Yes, I should have printed a mini gym There we go. All right PLA is in Now we're going to do a good old-fashioned load and let's do 50 millimeters go Go go go go See if it's pulling And it's pulling it in good Um send it someone says send it I like it Uh, this is I'll show you what it printed. I mean that little box It's not bad Also, I didn't wipe the bed down at all How terrible of me Probably should have And I'm leaving I'm out Gotta grab me a paper towel so So let me know If this is running clipper if anybody knows from any of the other videos Do I need to uh Do I need to Do anything There we go Do I need to do anything other than just pull the sd card out? I know There we go good 10 All right, here we go Filament detection off or on of course we always want it on don't we I'm gonna pull the sd card out and we're gonna find out if this thing crashes or not Not didn't yet We didn't have an answer so I'm just doing it Sending it as they say And now we're gonna rock and roll because I want to see Uh, I'm gonna delete that update because it wasn't for this printer. I was wrong about that I'll admit it I'm gonna grab that 15 minute benchy gcode I'm gonna drop it right on this We're gonna put it in there and we're gonna see this thing hopefully print a 15 minute benchy Out of PLA there we go Here we go Now I'm gonna move this thing though. I'm gonna move it back so you guys can see the top I'll show you this box in a second here Printer decent for not the right settings at all Um, I'm gonna get this printing Whoo, definitely smell that abs Definitely smell the abs Holy moly And I can't get the the filament just fell out Here we go Boom Where is it? There it is 15 minute benchy go. It actually shows me the preview Pretty awesome. I like that We're rocking it. Let's go While that's doing that Let me pop you over to here And show you Maybe against this white This is the the first little box it printed definitely curled right there But to be fair it was not using abs settings A little bit of waves in there You know, let's see what you got in here Wait till it tries to read the card. Nah, we're sending it We're gonna see it's green. I don't know if you'll see the filament, but Geez Definitely getting the abs vibes up in here though like the the the The aroma of abs Is in the air So this thing's trying to heat up. It's going to 280 Okay for PLA and it's going to 60 degrees on the bed. It's already at 50 now I'm just gonna trust the the process and let it let it run Um While we are letting this thing what is going on here Styrofoam While we are letting this thing run any questions any questions Just a heads up I don't I should look and see if it has a carbon filter Um, if it does It's not doing much Maybe I mean I have the top off too, but I don't That shouldn't matter. Oh look I don't know if you can see this But there's a little piece of uh filament let like come down it came down and like attached itself to the Statically to the front of the Glaster That was funny I don't think this thing has a filter on it. I don't see any filters It has some fans It has a Definitely has a fan for the side of the bed on the opposite side as the x1s do But but I don't see any filters. I do I do not see any chamber I don't see any Vents either the only events I see are probably where the main board is back here price point 799 plus shipping 799 plus shipping I believe it has wi-fi. I haven't set it up on on network yet nozzle size I believe was Point four. Let's look let's look at some of these good good cook. Love these questions Here you go. Interesting It's going I might have to see if I can get another camera up in the front here so printing speed on the manual right here says 200 to 250 to 500 by the way Not 600 like it says, but hey Now here we go Holy mother of mercy Point four nozzle. Yes copper alloy nozzle and a hardened steel nozzle both come with this thing Also got ceramic heating And whoa Whoa It's flying It better be flying for a 15 minute benchy though, right? Yes, it ran an input shaper And yes, it was included I wonder why manufacturers have never made stand or table available for their machines You know, it's funny is this thing's giving my new my new bencher run for its money It was shaking like a mother I'm going to get you up in here this way too because Seeing it this way is is much better in my opinion There you go Yeah Faster than faster. Yes Moderately quiet. I could probably put the panels back on and find out what it's Moderately quiet is a good way to say it Still running. It's running at 225 for the filament now Definitely not perfect. Uh, definitely not perfect You can kind of see some weird stuff going on in the center already And yes, it's all included There is a fan right over here Hard to see it Right over there. It's like the it's like the um X X ones have But I don't feel it very much like when I put my hand here. It's definitely not Definitely not anything like the X ones had flowing on their part. You can see it Uh, the quality already I did use the magic paper offset. Yes Prince yeah, I would agree. We can crank it up. Let's do it. So let's do two. Let's let's do 235 For the temp. Let's see what happens Help it out a little bit links absolutely Yeah, you can see the And this is their slice this came right from their website. I downloaded it and threw it on here So they should definitely have this um dialed in You can see how much this thing's wobbling My gosh I mean it's definitely given my My new uh bench of run for its money here That's funny about the overheads or overhangs But we're rocking. I think uh nice Someone's asking about buttons. Yes, there's a pause button. I don't know about swapping filaments You know, I did notice this though What's this do? There's two fans here Oh, wow This is cranking over here There's a side fan right here Now it's cranking That might have been helpful for uh the first part of this print But anyways, what we got if you we got lights Turn the lights on and off We have a z-height here um I guess this is your speed. Yeah printing speed Um your temperatures if you can see it. Sorry Uh nozzle bed chamber chamber is not on right now And then your two fans There is a pause and a stop button here and I don't know that you could change um Yeah, that side pan could keep a car into cool. Maybe Let's see if you get I'll be quiet. Let's see if you guys can hear how how loud this thing is here That's about the speed I'm gonna shut this front chamber door We're looking at it from the above That's what it looks like from above Doesn't look like the greatest benchy, but hey, it's gonna be 15 minutes, right? Layer lines don't look great I mean We'll see in a second. I can't hear a lot. Yeah, it's it's got its noise I imagine if I put this top on that wouldn't be great for uh It probably would not be great for pla. It says when when printing with pla Please remove the top that says that right on it. I don't see or feel any fans At all pulling anything out of the chamber. So i'm pretty sure this does not have any filters on it Any last questions? I think I I gotta get going when the benchy is done here I got a I got a hard stop at like three o'clock I got a lot to get done today as well, but I mean I'm gonna keep printing with this thing. We're gonna have some fun. I'm gonna slice some stuff up And see how it goes Let's see Hard to be oppressed by not a great minute looking 15 minute benchy when I got a great 13 benchy On my carbon at this point But what can you do? Yeah Uh, oh man X1 carbon is more expensive Um, this is 799 plus shipping. So it's more in the range of a p1p But this one's enclosed that has a heated chamber a little bit bigger bed by 280 280 by 270 You know, we're gonna go off just this benchy pretty much for my first print impression, but um Okay, shipping's free nice. Thank you guy I don't know that it's much quieter than my bamboo to be love to be fair Uh I would say they're close. I mean it might be a little quieter or something, but it has this big case on it, you know But it also is a big plastic case. There is a looks like a metal frame inside Kind of like the p1p is and then it's all like just just metal stuff um It's gonna go up to a thousand yet or something like that the pre-order the early price is 799 um bamboo started the race uh going and I think their new release will be even faster than the carbon and p1p Yeah, that would be awesome. Um, even if it's just bigger. I think most people just want bigger. Um I removed the glass on my x1. They were at a problem build a big build area bigger than the bamboo Yeah, this is 280 by 280 by 270. I believe Um bamboo's 256 squared I think um What else my first impression like I said a a little while ago, you know, I it's It's a beast. It's kind of big A little bit bigger build surface Um, it has that I think the panels the printer itself looks nice kind of looks like an old uh Or it kind of looks like a appliance. We'll say that um you know I think that it does look like a Um appliance right and There is that New bamboo is leaked at two two or I'm sorry 320 by 320 that would be okay That would be okay I can I can you know make your requests will happen If I don't mess with my uh table here making it go up and down um You know, I think Time will tell right time will tell um I think that the bamboo benchy The very first print that I ever did on all of them Except for the pit two iron box like last weekend Randomly was the benchy right and that benchy was not bad. It was like 17 minutes or 20 minutes right around I think it was 17 minutes Not bad at all and I would consider it a pretty good benchy for that fast and Yeah, um So Uncle jesse has the bamboo leak interesting off to check out his social medias. Um So You know, I think that It's it's hard to beat I'm gonna slide this over Um There you go It's hard to beat right When when you're first This is uh the the machine it looks cool I think it looks like that gets in a big appliance. It seems to be printing very fast It's all gonna be down to you know, what actual parts look like and and how they come off the bed um Let's see Interesting. Yeah, I'll check out. I'll check out uncle jesse's leak, but uh, you know, I think that it's it's I'm gonna come down to how it really prints going forward, you know and I could tell you this bench. He's not great. We're gonna look at it in a minute Um, I was gonna put the next one carbon next to this thing But I won't but It's big Definitely need a home for it if you're gonna use it I'm not a fan that it doesn't have the The actual drybox. I'm sorry the actual filtration. I don't see that anywhere in here I don't see any ventilation on the outside that it can even be blowing out of The only ventilation I see is tied to I believe what's the control box in the back Um Yeah, all the cheaty printers are like that like that. Yeah Um, definitely cheaty printers. Yeah Yeah Groud of you spend will be spending millions on tool changing so so expect bed slingers galore. That's funny Thank you. Uh, jay lopez. I appreciate that Uh, it's possible. Yeah, I have one right over here with no screen on it Let's see it. Let me just uh Throw my sweet filament into this drybox The drybox that has no desiccant in here because they didn't give me any to put in it I don't that's another interesting thing, right? I'm pretty sure I gotta look again But I don't think they gave you desiccant to add to your new drybox Something that was maybe over an oversight. I don't know But like if you're gonna send out a drybox And and make it exciting Put in the desiccant it says I don't I don't remember seeing any desiccant So I maybe I missed it. Maybe I missed it. It's possible, right? Weird things happen But And this is just it's just weird I think I think as long as the printer prints good. We're gonna be okay So here it's your drybox. It comes with it Unless maybe I missed the desiccant, but I didn't see any um So, yeah, that's what it looks like it clips on the back. I think that's a cool idea. I really do We pop this right here I definitely keep hitting that don't I? There we go Jay Lopez. Thank you so much brand new fan Thank you. Thank you. Thank you They have put out some good machines over the last few years Uh, the X1 carbon is I missed that. Um, we have a cheaty at work So, um, some weeks it works perfect and it stops week in week and it goes back works perfect Uh, it looks like it's pretty in time lapse and you're hosting a in real time. Yes Minder seven has to be bolted down. That's funny. All right, so it's done. I'm gonna let it cool for a second while that's cooling I mean There is a fan running, but it's the inside fan So while that's cooling someone asked me what they look like next to each other This particular X1 Does not have a screen on it But you get an idea of size Now that I have all these stuff here So this this will give you an idea This doesn't have a screen on it. Um, if you remember I did some unboxing of some Random ones There you go That's what they look like next to each other If we're going them side by side I can do that That's hilarious um Yeah, so there's that this is what they look like next to each other Much much larger machine as far as you know the case and all that stuff It does have to be a little bigger because the builds, you know build size is bigger Oh Yeah So there you go again. Thank you so much Uh, I think was jay lopez brand new fan. I appreciate that so I have all the parts for this one. I just need to put it together and I haven't got over here to do that yet Otherwise it would have a screen and all the stuff it needs Currently It doesn't We're gonna pull this bad boy off That's came off pretty good And let's go examine it. We'll let this thing cool down um I got to go in here in a second, but Let's bring this over Yeah, the size is definitely different, huh? Definitely different Thank you so much lester. I'm sorry. I said that wrong Um All right, here's what we got Uh, you can see some big issues here I mean general layer issues all the way up in here your regular mal There I have no idea what this was sliced like either, but I gotta tell you if you're gonna put your Your best foot forward, right? You better do it. I mean we pulled this right off the website. So they sliced it The same issues here. You can see that issues on the deck You see the issues down here on the deck where the uh, the top layers are Issues on the top top. I mean There you go Definitely room for improvement Aurora tech has a 15 minute bench that came out faster than this one Well, I wonder she's like I wonder if they sliced it themselves is really the question Because this one came straight from their website, you know 20 minutes ago and Yeah circle. Yeah, definitely issues on the circle on the rear window 3d print sos had a better result probably. I mean, I again, I don't know where they if they just sliced it themselves Because this is straight from their file I mean you think you'd think if this was off their website, it would be the best slice that could give you, right? that's what I would think and I can do a Really fast Using the same profile. Wow It was the one from the website interesting I'll definitely try another filament. Um, this was uh, what jesse pla So you never know it definitely could be filament I was looking for I had another benchy But I bet you my little guy has it somewhere he Tristan comes here and runs around and oh here it is. So I just want to point out Is this Oh, this might this isn't from the x1 never mind Not one I have I have some benches flying around but Tristan comes and plays with them. So I have no idea where he put them But I'll try a different filament. It very well could be the filament. Um I mean even the bottom Uh I'm not I mean There you go It's okay, but not great. So there you go Doesn't float that's funny um Yeah, definitely some filament tuning. I don't I'm not saying this is going to be a bad machine I'm saying it's it's brand new it's on And just like every other machine Mostly, um, you're gonna have to do some stuff to it. Um out of the box first impression It's not terrible for seven ninety nine It's not terrible. Yeah, I'm hoping it gets much better than this. Um, only time will tell now And out of the box a little disappointed, you know, how this Uh, how everything went you send me abs. You don't give me a model the print for abs If this is my first printer and I don't have another spool What do I do? I mean like what am I supposed to do? Um, you know, I can get your slicer and learn how to do that if this was my first printer But I want to print something right now and you gave me abs and you put a pla Model on the sd card. I don't like that. Um Other than that You know, we'll just see how it goes. I think um I'm just checking that drag chain. It's not super tight right now But when it got to this corner over here, it felt like it was really tight So I'm gonna keep a keep an eye on that as well Uh, and um, yeah Thank you so much non stick. I appreciate that. I hope you have a great weekend as well um Also, you were moving the printer, uh, also you were moving the printer. Remember, I'm not sure what you mean by that Um, when a man is too many benches. Absolutely um Nice jack in the shop sounds great great stream have a great weekend didn't catch a video print. Oh Uh, does it print in the stated speeds? I have no idea how fast it was printing But it printed at this bench. He says it was 15 minutes um Has a lot of room for improvement though, but it's 15 minutes. Remember that um Thank you. Thank you. Jay Lopez appreciate the donation again um Let's see print that included gcode Now that you have pla loaded just for giggles. I definitely will it was the box It looked like a little box. I don't even know where it went now. I probably oh, it's right here So this is what that looked like Um, it I didn't let it finish clearly, but it was just a box I mean it's all twisted and stuff because it was printing in in abs it with with pla settings, but um Maybe I'll reprint it to see how that goes too So yeah, not bad though overall, uh, jonathan have a great weekend. Um Overall, I got to get going. I really appreciate you guys hanging out with me Um, cheaty There's room there's room for improvement, but I think that hopefully it'll be a nice printer and Um, you know congrats on getting the speed down the cortex. Well, I think it's awesome running clipper I'm going to dive deeper into that. I have no idea what the interface looks like on this thing I haven't not connected to the network yet. So I will um Yeah, anybody else, uh, yeah Shoot a question in the video. We'll see you Monday for hot makes on the hot makes channel. I might broadcast here too again Um, we have the remerf team rocky mountain rep rep festival team coming on. We will be there in two weeks Uh, it's going to be a lot of fun. We'll be there all weekend. They're allowing me to emcee the event Which is a lot of fun and also, uh, I know there's going to be some great Content creators there. Um, jill telling the 3d printing there. It'll be there. Uh, I know staphon cnc kitchen is going to be there Um, I know there's just going to be a ton of people there. It's going to be a lot of fun I believe they sold out of their Exhibitor tables. I could be wrong and they were they weren't selling them. They were free Exhibitor tables. I could be wrong about that though. I think they had at least 100 spots on that And I know that last I heard they they were 1700 People registered it is free to go if you get there Are free to go. All you have to do is get there. It's in colorado. Check it out Rocky mountain rep rep festival dot com or r m m r f dot com remerf Everybody else we shall see you guys soon I'm going to get going. I got to clean up and get ready for the easter weekend and it is gorgeous here So it's time to get all the stuff out of the shed and back on the patio My my timer's going off. So I got to fly everybody. Have a great night. Thank you so much for being here with me If you have any questions at all shoot them in the video and I will uh respond also I won't have a video tomorrow. Um, if you don't remember kaleb That the guy who edits my videos and a good friend of mine lost his house in a tornado And uh, we did some awesome work raising some awesome money this past monday for him But he's I didn't I didn't bother him with a video this week. I just said don't worry about it So I for the first time this whole year. I won't have a video out this week But I will put out some shorts. So uh, stay tuned for those. Um, everybody else. Have a great one. Bye everybody Happy easter. See you