 I'd like to say that my camera, which is one of those life cam things from Micro-Ginsoft, is wank. Absolute wank. If the screen goes off like it is done, I don't know how long it goes because I've been too busy doing this. It just stops recording because it's made by Strokos. We just about got this done. We're just going to shut the speaker wires on and although this isn't really color coded, because it says BL for here so I presume that's black, but then it's got negative 3 volt here. I actually wanted to use these for the speakers. I can't think of hands the hell, let's look on the side. The speaker is going to, so alright, I see. What it means is you don't use the black for there because that's the next speaker. Stick the black in for your negative 3 volt because that's a lot easier for the color code than isn't it? And if you soldered one ended, probably easier just to turn it round and pop the thing for you around like I just found out. Yeah, life cam by Microsoft, but you can see that it doesn't actually focus on anything. So it's not that great. I've got another camera, Camac. Camac? Yeah, Camac thing. Especially ultra high definition. But I've not connected it up yet. I shall give that a go next and see what that actual camera's like. I bought it years ago just don't use it. Never really thought what to use them for to be fair. Oh well that's good. The whole way it goes through the hole. So we've got these two wires to put on. I'm not going to bother connecting the battery stuff in and putting it in the thing. I'm just going to power it up first and see if the darn thing works. I don't know if it works. I'll just stick it in this box. Does that go in that solder? Beautiful. Now I don't know if you can see in here I quickly chuck this in and out of here. I've heard lots of people complaining about these particular things. The other thing I would complain about it is that this one does it's off. Especially if you've got one of these like I have one of these. It's like metal. It's one of these things. Why wall type stuff? Because it is quite good at cleaning. Some of the crap off that you actually have the water. My water supply to this house I think is poison because it's absolutely terrible. Not only does it leave horrible marks around when I wipe it in here around my thingy. It knackers the washing machine because washing machine is liblard, a wicker. It knackers up my, in fact it knackers everything in the water. It's what's in it. You have to filter the stuff out of it. Now I'm supposed to be able to ingest this stuff without filtering it. It's supposed to be safe. But if it kills a washing machine, what's it going to mean? Anyway, so that's that. What I'm going to do now is I'm going to pause to save time just to keep up the power and come back to me to speak up. Here if I can pause. Actually, I'm just going to point out on the destruction. So it's quite important to get this area in the right places. And here you have it, but you can see here basically what it gives you is it gives you the two parts of the aerial. And you've got the wire here and then a big gap and then the wire and then the first wire there and the smaller, the smaller one. And it's pretty quick that you don't get these two ones in the middle messed up because you just won't receive anything. And so as you can see, but the two, you might turn that right the right way around, it will correspond to the paper. The two wide ones, I think you can see that because it's a stupid wide. The cameras absolutely blank. It's like, yeah, that's like that. I'm the only best to show you, but the tools aren't really good. I'm going to turn this up as well because I think the actual music plays run out on battery. It says it lasts 10 hours, but I don't know. So now we've got A, B, C and D. A, B, C and D and these correspond to that. So A and B are the two big guns and then C and D I like that. So that's how I'm going to solder it. Pop them in the heels. That's one, two. I'm trying to do the two at a time because it's going to make it easier for me to make sure I get these on the bits that have been scraped off, but not yet scraped off whatever. So down there, so I can still see that they're in place. I should be able to get these in connections on to that. There's the silver. Oh, I turned the P. Oh well. I turned down my, my solder station to 150. I was thinking for some reason, probably something to do with the drink. No, I got it all finished, but I haven't. So it's on there. It's having to reheat back up. It says it's on three, 25 now or so. Well, I do like beer, but I need to stop. It's supposed to be going running and trying to keep reasonably fit. You know, in case we're getting invaded or something, you never know these days. Oh, it's not hot enough. It lies to me. It reports on there that it's at the right temperature. It's all right now. But it wasn't when I first started then. I reckon I might have to pour that down a little bit, just make sure it's nice and, that's the ticket. And then the same on this one. So I just bent them to keep the wire stuck on the floor now. I'm just going to pull it down a bit, a little tiny bit of pressure, just to make sure we get all your bugger. That's the ticket. Yeah. And that's what I was saying. Look how quick I just chucked that in. I've seen a lot of people on doing a review about it saying that they don't like this. It's not perfect, but it does. If you chuck it in the right way, it goes all right. And shut up because this isn't anything to leave the soldering on. Even though now I've had it for a couple of months, I can actually give a little bit of feedback on it. Well, I'll do a whole vid for that, but if you're interested in this video, it's not bad for the money. Lesson 50 quid. 50 English pounds, you know. It's not too bad. It works. It does keep reasonable temperature. I haven't had to do any real work on cleaning my tips or at least only use the one tip really. It's a little... I don't use the chisel ones like a lot of people do and I certainly don't use them conicals. I'll just use the... I don't know, it's sort of like cut off at an angle. That seems to be fine for me. All right. Okay. That's it. So I can do the rest with and did you see the way I picked up all the little bits? I used the speaker, the magnet of the speaker to pick up all the little, the little ends of where I've been cutting and just chuck them in my little, in my little solder pot. Oh, I chucked the bad soldering. So if I chucked that just on here, if I put that just on here, I can actually feel the effects of the beer now. This is quite nice. I do like that. I'll notice the case to my capacitor as I crack in it. That's nice. I love quality from China. Such quality, such quality. This is... I mean, I've heard one of these and I know what they sound like. So there's no way I'm going to want this. Badgering my eardrums. I don't think that actually goes in there, does it? I don't actually think this is for the kit, but I'm going to stick this in here because this tends to fall off a bit and get a bit annoying. It's good to have it on there. I don't think that's the right screw for it. I'm pretty confident that's not the right screw. So there's this come from. I've done it, that'll do. Does it shut it off? Does it put it on? It does. There's a big gloppy bit of plastic sticking off the edge here. I think I've just broken it now. Now it still switches on, switches off. I don't expect it to feel, you know. Dolphin costs three and a half quid and to try and get one of these here, eBay, they're three and a half quid. You can get two for less than that off Amazon, just letting out because I had a bunch come through. Because I keep running around with these little radios. I'll show you a little radio, actually. There's one there. Check it out. Oh, new bugger. One of them just dropped. Oh, there it is. I've got two on. Okay. I don't know if you can see these, but these are two diodes and a resistor. Two different value resistors, giving me two different volumes, but they receive radio stations, little crystal sets just like that. Just got to put a little, I've plugged it into an amplifier, or a crystal headset, you know, onto it so you can hear the thing while you're coming off there. Stick onto a coil, it's better. You'll be handed over and get the different stations, or stick a tuning capacitor on there, and you can tune in to the different stations. And they actually work. I did a video on them. So here we go. Let's power this baby on.