 Okay, lunchtime progress report. So I really should have my mask on. So I'm wearing this here, but I'm just gonna be brief about this. There's a lot of not so nice chemicals that come off of spray foam. So it's very important to have your PPE when you're doing this. All right, I'm gonna flip the camera around. So this is the progress we've made thus far today. So this is the back attic of the house. This is over the master suite. The master suite was super-duper cold. This should really help out a lot. And I've done some initial QC. You can see the orange spots here. That's called Nate picking by the crew that I work with. And you can see where we've stopped here. So we'll be coming back and tackling this right after lunch. But then on the flip side over here, you can see that we have the soffits done. So there was a debate earlier. It burned a lot of material the way we decided to do it. So we're gonna need to discuss this with the clients in a little bit. But this got completely filled. And this is gonna bump the cost of the project up a little bit. You can't see, but back behind there, it is about 12 inches deep. And we just completely filled that. There was an air sealing opportunity that short of filling it, I don't know how we were gonna do a good job. And rather than messing around with it too much, we decided just to totally fill it up. So this is all closed cell spray foam. We are aiming for, it's three and a half inch spec, which means you're allowed to have between two and a half and four and a half inches. And it's a pretty decent spray. I'm sure there's going to be some people that are critiquing the imperfections here because you can have a smoother spray than this. But the key part is that your depth is there and that the air sealing is done properly. And I'm happy with how that's going. So after lunch, we're gonna move up here. Once we get this little bit finished, so we're getting this room up here prepped and ready so we can do it. And then we have to be hitting this whole roof tattoo. So we've got a bunch more to do. Probably won't finish today, but I bet we'll finish tomorrow. And this house will be substantially tighter and this area will then be inside the house and should heat much more easily than it did in the past. Thanks for watching. Talk to you soon.