 hey guys after playing around with this little baby slayer circuit I mean it's fine don't get me wrong but this little transistor gets really warm it can dissipate the maximum 500 milliwatt and it does get really warm and I played around quite a few from 33k down to 3k resistors and you don't really get a great deal of performance so I tried a BD135 again that gets really warm you do get a bit more power out of it but I've gone back to the first circuit that I built with these sort of things and that's this one here and this one here uses a tip 35c and you can 5 amp on the base 5 volt across the collector and it's exactly the same as this absolutely no difference the only difference I've got here is I've got this little disconnected up to the positive so it's for a capacitor or it's for so I can just clip on different capacitors and pry around with different capacitors because this particular oh shake it around is a little bit bigger nowhere as big as the biggest one which is over there you can see it just slumped in the corner as it fell down on me the other night when I was trying to pry around it's like going to settle it's going to settle okay yes you can put a capacitor on here but a little bit of extra a little bit of extra oomph I've tried to all sorts but I've got a few extra capacitors I've got another couple of these through the post today these are out of microwaves or cookers or something a little bit expensive compared to some one pound 28 each capacitor I think something like that so yeah so at the minute I've got this set at 12 volts so I just flick it on a 12 watch you can see the LEDs come on which tells me me polarity is correct and you know get a little bit of bright inside a bowl I don't expect let me turn this so I get this to stay okay so here you get a bit of a little glow on the bulb there's a better idea of how much you know from it know what I've actually restricted the restricted the current 0.4 ounces drawing what they said to two and a half watts that's a point one eight nine or I should say not point nine so that's how it's you can't really expect to get a great little distance on these things and that is not lit it looks like it's lit on the camera doesn't it but it's not it's not okay it's just very very slightly it is not you have to go in that close to get it lit but even so just put that there for a minute we'll put it on top but you can't see it anyway I've got some other things so just hang tight I should have probably prepped for this