 What's up guys welcome back to the vlog so this is season two it's been a while since I made a vlog video so I decided to start this thing just reset it all we're in the new studio we got the new salon open so a lot of really cool things to share with you guys so today what I'm gonna do is get started with a short haircut so I think you'll like that also I use Olaplex as a cutting lotion so I think you guys are gonna find that tip pretty cool and there's a lot more stuff packed into this video so hope you guys are excited that the vlog is back I'm excited to be doing it again and there'll be a lot more videos to come my foot is healed thank you guys so much for watching let me know if you have comments below here we go what's up guys welcome to today's video so on today's video I'm gonna be using Olaplex bond perfecter number two as a cutting lotion the reason I love using this as a cutting lotion is it serves two purposes it's great for keeping my sections clean and working through a haircut like any other cutting lotion would be but it's also a bond perfecter so it's gonna multiply the bonds in the hair and help make the hair stronger as I'm going through the haircut so it's serving the two purposes the other thing about this is it's a good little upgrade so if you're doing a haircut and you put the number two in the hair then I would charge an extra maybe ten dollars for that haircut because you're making the hair stronger you're doing a treatment while you're doing the haircut so now as we move into the haircut what I did was I took a parting on the right hand side of the head followed that right back down center back right through the crown area and then right down the center back and now I'm taking diagonal forward partings about a half an inch at a time throughout the head shape now the other thing I want you to notice in this haircut is how I work with the head shape because a lot of people even though I'm cutting close to the head as my finger as you get towards my fingertip the head shape starts to move away what that's going to do is build up weight very quick so you want to make sure that you're focused on your elevation throughout the back of the head shape so realize that underneath the occipital bone what happens is the head curves in towards the neck in most cases then as you go above the occipital bone it starts to move away so just be very careful with how you're elevating and how you're building up that weight the other thing that I'm doing is I'm working on a traveling guide so I'm working half inch at a time and you want to see that guideline coming through so quick tip when cutting short hairs to make sure that you stay consistent short hair is the hardest thing to cut because you can see all the inconsistencies the different over directions that you make the changes that you make in the haircut you're going to see those shifts in the weight on long hair you don't really see those things because the hair is longer it doesn't sit right on top of itself but in shorter hair you're really going to see those inconsistencies so make sure that every parting is the same width the over direction stays consistent just working all the way through the head shape now the other thing that we're doing is I'm going to work my way all the way through to the division point so that is from the top crown area down to behind the ear and that's where I'm going to stop cutting the left hand side also notice my elevation and you can see that buildup of weight so now that the head shape is curving away you get that buildup of weight in the top crown area which is actually a good thing I like having a little bit of extra weight up there so now you're going to notice a shift in my finger angle so now my finger is pointing down the reason for that is to stay consistent with the way that I comb the hair on the left hand side I was taking a parting taking the new hair pulling it towards my guideline and cutting it at the guide now if I were to continue cutting the same way I did on the left hand side I would now be pulling the new the the guideline into the new hair which would shorten that new hair so then I would end up with one side shorter than the other on the haircut and that's where a lot of you guys out there might struggle when you cut a bob or you cut different shapes you get different lengths so just stay consistent with your combing so I work my way through in the back partings are staying the same diagonal forward working through the other key thing here is to make sure that what I do is I take the top part of the section and I cut it you're gonna want you're gonna think in your mind that you want to start at the very bottom work your way up I say it's I think it stays more consistent when you start at the top comb drop the section then work your way through I'll show you guys right here an example so as I comb that hair out I would normally you would think you'd want to start at the bottom so I start right here at the top cut that through then I re comb and I cut sort towards the bottom so you can see it just allows me to shift that finger angle to make sure I stay consistent throughout the whole thing and then you get a better line now paying attention to the elevation so now we're in the crown of the head and the head shape is starting to move away so if I kept everything at the same angle it'd be way too heavy throughout that crown area so I want to pop a little bit of volume I want to build up a little bit of weight so it has a nice silhouette on her head shape but I don't want to go too heavy to where it's just laying flat and doesn't look flattering so make it try to keep that balance I want that weight to hit right above the occipital bone and start to build itself up and that tends to look the best in my eyes so just finishing up at that division point like I said we go right to the division point and then we stop now you can see the consistency in the weight but what I'm gonna do is I'm gonna go through and I'm gonna cross check by going diagonal back so we cut everything going diagonal forward so now as I shift diagonal back I just bring everything out and I'm just dusting the ends I want to make sure check my consistency throughout the cut and just make sure there's nothing crazy going on in there so if you see something that is really sticking out then you got to go back and cut it the same way you cut it the first time don't cut it all off through it you can see that little edge there that's okay but if you go through and you see something super long sticking out there you're gonna have to go through and readjust it and there you go so you can see as I'm working through just working diagonal back dusting off those edges so now we're gonna work down the right hand side this is the weak side so what I'm gonna do I'll do something different on the heavy side but you got to separate those two to me those are two different haircuts when you have the weak side you have the heavy side you got to cut them different you got to think about them different because one has a lot more density think about in the salon you would not cut somebody with fine hair the same as you would cut somebody with thick hair right so same thing with the weak side and the heavy side so I'm going out bringing everything straight out from the head you'll see that slight build up of weight the reason that that happens is like we talked about earlier the head shape is moving away from my hand so right where my palm is is gonna be the heaviest point the elevation is the lowest but that build up of weight you want to make sure it sits so it's flattering to the face shape so just making sure I'm going through there I'll check the weight I'm gonna leave a little extra weight on this haircut because I want some weight to play with and I'm gonna go in and do some point cutting at the end of the cut so notice traveling guide works through then when I get to in front of the ear I'm gonna start to over direct back to a stationary guide so traveling traveling the first two sections maybe three sections depending on the head shape and then over directing everything straight back then you get that little push of weight in the front that's gonna help you know with the the end result the look that we're going for so now I'm showing you that there's a lot more weight and density on this so I'm gonna split this in half right at the parietal ridge so I split that and I'll twist the top away and then I'll go through and work the side now the side will all cut the same as the other side but then when I go through the top I'm gonna do more elevation to remove more weight create more layers and movement so that way I don't have a super heavy side of the haircut and then a super weak side of the haircut we want everything to sit balanced so same thing bringing everything out traveling guide through and then over directing everything in the very front when I get there but you can see that shape starting to build up right behind the ear that's what I love when I'm cutting hair is just to be able to start to see that shape unfolding during the haircut a lot of you guys are interested the scissor I'm using is the Mizetani this is the retro black fit retro scissor thing I like about it's got an even handle so I used to cut hair with an even handle scissor all the time some of you guys out there like it I wanted to give it a shot again because I hadn't used one in a long time I like an even handle scissor in some cases but other cases I did find it a little uncomfortable because I'm now used to cutting with an offset scissor so if you guys like even handle it's a great scissor but if you like an offset handle obviously I would go with something else maybe the DB 20 I love or the type K scissor from Mizetani as well top I'm working through again over directing everything back and just to the back corner so it gives me a little bit of an angle not too much layering but that over direction is going to push that front nice and long that will give me some stuff to play with in the end result so now we're going to move into shampooing and conditioning the hair because the old plex bond perfecter number two is not the conditioner so you don't leave it in the hair and blow dry the hair that way so we had it in it was a treatment that we were doing throughout the entire haircut now I'm using Paul Mitchell invisible wear shampoo and also conditioner to help build some texture into my cut and also condition add shine and then we're going to use the invisible wear volume whip this is a brand new product from Paul Mitchell so it's a pretty fun product to use because it's all about texture and just movement in the hair and this haircuts really about that as well so we got the Paul Mitchell neuro blow dryer they sent me as well always love using new brand new tools so we're going to use that blow dryer I'm going to do a flat wrap technique with a little bit of leafing throughout the top so this technique that I'm doing right now is called leafing so it's lifting up the hair what that does is it doesn't flatten the base of the hair or the root of the hair so we want to build some volume in there I'm going to do the same thing in this crown area to flat wrap the bottom to make it nice and sleek but then lift it and leaf it throughout the crown to add that volume in the crown so it's all about prepping the hair getting it ready for the style and the cut so last little bit remember this is the weak side on the right side so I did a little bit of leafing there as well to build up some extra volume so those of you guys that aren't hairdressers that are watching this at home when you're styling you want to make sure don't do this haircut go to a salon get the haircut done the style part do a little leafing and that'll help build that volume in now we go through undone texture spray I'm going to do that right before I iron it's got a nice light hold to it builds in some texture but I'm using the palmatial neuro iron and I'm ironing everything to the opposite side she's gonna wear it so she's gonna wear it to her left so I iron it and give it a little curve to the right and then as soon as I comb it over you can see it's nice and sleek and hugs the head shape these are the lines that we created wet so now I'm going in with the Mizetani puffin all these scissors are available on freesaloneducation.com if you're looking to upgrade there's also some discount codes and stuff on there as well so go check that out but this is a puffin it's a dry cutting scissor I'm just going through to soften the line I'm not trying to change the line I'm not over elevating the hair to take out a lot of weight I put that weight there on purpose I just want to lighten up the line because the one thing you can't do when you're cutting a line is completely take care of density at the same time so so I didn't have to over elevate it I bring it out I cut my line and then I go in dry and I can take out some of that density so notice the scissor goes in very vertical into the section that's gonna help keep from making those lines go away same thing on the top I'm over directing everything back exactly the way that I did it in the first place and now to lighten up the fringe area what I do is I do some slide cutting this is with the puffin as well and then I just flip it out with the iron to end it with some texture and then I got one more or actually two more fun products that I'm gonna use in the hair this is the invisible wear pumping me up this is a pretty fun product to use it shoots a powder out and it creates a ton of texture don't overdo it start small and work your way up but you just spray it I like to spray it right at the root and it just pops that volume in and then I finished it with the invisible wear orbit hair spray which had a nice hold to it wasn't super firm but it definitely did the job to keep the hair where I want it so that is the end result for the cut hope you guys like it if you did let me know in the comments below as always I appreciate you watching these videos thanks for watching