 Hi, and welcome to this DJI S2 demo on call chain monitoring. Like this project possible, and to capture temperature data, the blue maestro sensor is used. These small sensors advertise temperature data that application captures and then sends to DJI S2. The capture tool is an Android Studio application which is integrated with the DJI S2 Android SDK to make it possible to upload temperature data from the sensors. The application search for Bluetooth low energy devices and when you select the device it makes a temporary pairing to collect temperature data. By pressing upload the current reading will get stored in a local database and as a tracked entity instance event. The application automatically reconnects to the device and listen to changes. One feature in the application is setting an alarm with a minimum and maximum threshold. If it's over or under the threshold an alarm notification pops up. You can also export the local database as a CSV file to your phone's local storage as a backup. You can also clear the database for instance after an export. Last but not least, by pushing upload your readings will be sent to the tracker capture interface in DJI S2. When inside the browser the readings will appear on the tracked entity instance.