 Cutting Paranite Let's prepare a working file. We will have a gasket made of Paranite. Import the file into RD Works. Control plus I. Let's create two different files to try different cutting methods. And at the end, let's see the results and compare them. We are working with a 90-watt Rickey W2. Let's set the parameters for the first method. Low speed and high power. And for the second method, on the contrary, we will set high speed and low power and will cut in several steps. Adjust the air pressure. Adjust the focal length. Method 1. Low speed, high power. Method 2. High speed, low power, multi-step cutting. This method of cutting is more tender for the laser tube and the material. It practically does not differ in the duration of execution from the first method. In both methods, the edges are smooth without fusing and carbon deposits. We will be glad to help you in choosing the equipment you need. If you have any questions or comments, please feel free to share them in the comments.