Loading...

The Machine Warehouse Machine: 415 - Complete Bargstedt/Heeseman Sanding Production Line

1,587 views

Loading...

Loading...

Loading...

Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Aug 8, 2011

Bargstedt-Heeseman Complete Panel Sanding Production Line for the sanding of 4' x 8' panels.

Equipped as follows: Bargstedt Profiline TDP210/DG/25/12 Infeed Vacuum Lift with panel flipper and conveyor

Line Layout as follows: (1) Bargstedt TFR580/G/50/41/12 Infeed System Consisting of: (2) Drive Infeed Roller Conveyors (1) Vacuum Lifter with (3) positions Complete with Safety Fencing (1) Bargstedt THR800/L/40/33/12 Driven Alignment Conveyor (2) Bargstedt TTG500/2/25/12 Driven Belt Conveyor (1) Bargstedt TFB100/31/12 Driven Automatic Panel Flipper (1) Control Cabinet with PLC controls for complete line control Total Connected Load: 16kW; Nominal Current: 35A Compressed Air Requirements: 88 NL/Min; 3.5 SL/Min

Machine Workpiece Sizes Specifications: Length Min/Max: 1500mm/2440mm Width Min/Max: 900mm/1220mm Thickness Min/Max: 5mm/40mm

Heeseman MFA 6 Impression Wide Belt Sander Q/L/L 1st Head - Cross Belt, 2 - Speed, CSD segmented Head 2nd Head - Longitudinal Wide Belt, 2 - Speed, CSD segmented Head 3rd Head - Longitudinal Wide Belt, Infinitely Variable 0-100% Speed, CSD segmented Head 4th Head - Brush. Table speed infinitely variable speed with suction. Sander was tied into a production line and will need to be modified to run independent of line control. Requires a minor software change that can be done during installation. Sander was also modified to run only 51" belts, can be modified to run stock widths.


Heeseman MFA 6 Impression Wide Belt Sander Q/L/L 1st Head - Cross Belt, 2 - Speed, CSD segmented Head 2nd Head - Longitudinal Wide Belt, 2 - Speed, CSD segmented Head 3rd Head - Longitudinal Wide Belt, Infinitely Variable 0-100% Speed, CSD segmented Head 4th Head - Brush. Table speed infinitely variable speed with suction. Sander was tied into a production line and will need to be modified to run independent of line control. Requires a minor software change that can be done during installation. Sander was also modified to run only 51" belts, can be modified to run stock widths. 1st head does require minor work. Drive pulley for sanding belt shows sign of vibration. Motor is good and bearings were replaced on drive pulley. Requires a new shaft.

Bargstedt Profiline TSP210/DG/25/12 Outfeed Vacuum stacker

Line Layout as follows: (1) Bargstedt TFR580/G/50/61/12 Outfeed System Consisting of: (3) Driven Outfeed Roller Conveyors (1) Vacuum Lifter with (4) positions Complete with Safety Fencing (1) Bargstedt THR800/L/40/33/12 Driven Alignment Conveyor with panel centering (1) Control Cabinet with PLC controls for complete line control Total Connected Load: 12kW; Nominal Current: 26A Compressed Air Requirements: 60 NL/Min; 2.4 SL/Min

Machine Workpiece Sizes Specifications: Length Min/Max: 1500mm/2440mm Width Min/Max: 900mm/1220mm Thickness Min/Max: 5mm/40mm

The Machine Warehouse performed all the service work on this machine including installation. Contact us to see how we can help you with this sander. This machine is being sold as a complete sanding line with an (2) sanders and automatic feeder, panel flipper, and stacker.

Machine is also being sold seperate under the followin TMW Machine Listings: 2005 Heeseman MFA 6 Impression - TMW Machine: 411 2005 Heeseman MFA 6 Impression - TMW Machine: 412 2005 Bargstedt Profiline Vacuum Infeed System - TMW Machine: 413 2005 Bargstedt Profiline Vacuum Outfeed System - TMW Machine: 414

Check out this machine and the individual pieces at http://www.themachinewarehouse.com

Loading...

When autoplay is enabled, a suggested video will automatically play next.

Up next


to add this to Watch Later

Add to

Loading playlists...