Sewing Machine Repair For Beginners





The interactive transcript could not be loaded.



Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Streamed live on Aug 31, 2015

If you are looking for more information on the sewing machine repairs, please go here http://www.repairsewingmachine.com/ . Also you find out the difference between industrial sewing machine repair and commercial sewing machine repair .

Sewing machines play an integral role in the fashion industry. They have been in the use for many years and they continue to be improved and modernized to meet the current market demands. Sometimes, they may get out of services and this thwarts all your plans and you can hardly sew. Sewing machine repair calls for keen focus and consideration of some few, but very important steps that will definitely help you get the machine back to work within the shortest time possible. We take this opportunity to offer you some effective as well as practical concepts that you must consider the moment your sewing machine break down. 

STEP ONE: Start by cleaning and oiling the machine

In case your sewing machine stops functioning, you need to start by making sure that it is perfectly clean. This can be managed as you remove the upper thread, the shuttle needle and the bottom bobbin. The moment the presser foot is up, you run the machine at a high-speed for about one minute. In case there is some notable variation in its speed, the machine should simply be oiled and allowed to work perfectly. You can follow your manual so that you do not end up spoiling the machine. You should comfortably remove the topside of the machine, then carefully apply one drop of the sewing machine oil. Next stage to take is to reach the bottom side of the machine. Remove the base cover so that you access the mechanism. 

STEP TWO: checking the feed dogs. 

Use a flat screwdriver to remove the needle plate that has been retained by the two screws. Some models such as the quality Elna or Pfaff and Benina allow users to remove the top plate in order to access the areas fixed to needle plate. Some do not have attaching screws and you need to be very careful so that you manage to fix properly. You manage to remove, check and comfortably fix the feed dogs and make sure that they are completely clean. The best repair you can do here is to pass a rag under them and at the same time use a narrow tool or old needle then remove all lint on the inside feed channels. When you are through, start by carefully putting the needle plate back on its place. 

STEP THREE: Check upper tension

The thread tension presents a lot of serious issues to most sewing machines. It’s important to learn that the upper tension usually determines the under stitch and bobbin that is the bottom tension usually determinisms upper stitch. Check the upper tension carefully and remember to dust it and remove any broken pieces of thread that usually stick between the tension discs. Be careful to change if there is a gap because it affects the movements of the tension discs. In case you notice a problem, quickly fix it to make the upper tension running successfully. 

These are just, but a few key steps to always keep in mind. They are very useful and highly important when repairing your sewing machine and they make sure that it is functioning normally.

For answers for more questions like how to repair sewing machine please go here http://www.repairsewingmachine.com/ .



When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...