 It's the first day that it's been pretty sunny outside Going back to my vegetable garden real quick on the way to the shed Look at how tall this guy's gotten This is gonna be like a whole head of lettuce or the skinny ones at least probably within a few weeks Pretty impressive We're gonna be going into the shed again. I have my fiance's mom I already mixing up some of the slip because today We're going to be casting one of the molds that are in here actually because you guys requested it my last video actually got about a thousand views, which is crazy and I actually know which one that I want to do because it was the one of my last one that I thought was pretty interesting And I believe it's this one right here Yeah, it's the Demi-truck so we're gonna be slip casting this one right here and this mold right here was manufactured in Fresno, California in 1977 so that's pretty crazy right there She doesn't quite want to have her face on camera, so we're going to try to avoid doing that So we're just gonna set that down right there And then we're probably gonna need to clean it out a little bit because it's a little bit dirty So we're gonna get some tools that we have up here Thank you We're just gonna try to kind of clean this out as much as we can Outside, that'd be a good idea, so we don't get any around this area Alright, so we're gonna put it on our Kind of decommissioned ping-pong table. I'm gonna set this down right here Let's see about getting some of this dirt out of here because it's it's pretty in there if you guys can see We want to make sure that it's as clean as possible so that we can put that slip in there But the mold itself is in really good condition if you can see right down in there Even like the small little ridges and everything are still pretty much intact This side's even better. It's just mainly cobwebs and stuff that have gotten into the little nooks and crannies Let's just try to Get this out as much as we can. I wanted to do this first person Because I did my last video in first person So doing this with one hand is a little difficult But I'd like to do more mold cleaning videos where I actually have my whole camera set up and everything So if you can get anything out of there, look how much dirt came out of that Quite a bit with for just a kind of a small brushing that we're doing Try to kind of like spin it in the wheel I noticed a lot of people said they like these vlog style videos. I do too. I like making vlog style videos Not only is it easier But it's also it's fun because you can be you know Super real no edits. I mean, I'm always real but like I Don't cut out any mistakes or anything like that unless it's like a Super big mistake like my last video. I brain farted for like Good like Six to ten seconds at the end of the video because I forgot what I was gonna say so I did cut that out But everything else is pretty raw in these and I like that. I think we're loosening up pretty much most of the dirt in here I'm gonna give a little bit of a tap Yeah, see that should be pretty much perfect now I'm gonna do a little bit of a more of a brush over on that one But this one right here, we really need to loosen up the dirt that's in these wheels And it's these small crevices that tend to give the most trouble But as you see they kind of loosened up a little bit now and give a little tap Look at that That we all clear up that we'll clear out a lot. Let's Kind of twist it in here Get in there over here Push that see the stuff on the outside doesn't really matter too much Because it's just the spot where the clay slips gonna go into and that's what these little crevices are for these little openings Let's go ahead and tap that again I'm gonna blow into it real quick much better Same thing with this. I think that looks pretty good I mean, there's a little bit of dirt right here in this little kind of corner pocket So I'm gonna try to work my magic with twist in this brush Let's blow it out. Voila pretty much done and then let's go ahead and put it together and Then bring it back into the shed And we're gonna set it back down and now she's gonna go through with you Basically, what's gonna be happening right now So it's gonna be happening. Well, the first thing is this is small enough probably wouldn't need to But we're still gonna bind it just to be on the safe side. Yes, so we're gonna put around this Velcro it'll keep it from seeping out the edges not just seeping out the edges, but the pressure of the slip Can completely just push it apart. Yeah, because it expands a little bit, right? Well, it's just it's a lot of pressure it can stay. Yeah, you want to keep it Towards it. You see now. It's nice and tight Another two pieces kind of fit together like a puzzle piece And what's gonna happen is we're gonna pour in some of this slip in these two notches right here And then we're gonna leave it in there for a certain amount of time until the moisture the What's this made out of the ceramic? Plaster the plaster is going to See if we can get a good pour on there The plaster is gonna absorb the absorb the moisture in here And that's gonna cause it to gel a certain amount of it will but then the inner parts We're gonna actually pour out and it's the shell like I said before that's left over that kind of takes the design So right now we got It all filled up and how long do you think it's gonna take for this one? I'm gonna count probably about a minute a minute. Okay. All right. I'll see you guys back in a minute All right, so it's been about a minute. So we're gonna go ahead and pour this back down in here Let's go ahead and There we go so see how much actually comes out so Sometimes you pour out almost as much as it seems as you put in there But it's what the actual mold itself, you know, it adheres on the inside the longer you keep the slip in there The thicker the wall. Yeah, it'll be thicker because it'll gel More but you have to worry about ones that have thinner openings that they Will gel over and you can't pour the excess out and you'll end up with a solid Yeah, and you don't want to have a solid if you're gonna fire it Because these things need to dry they need to be bone dry kind of like these guys They're still kind of in the process But they have to be completely dry because the moisture would cause them to explode when they get too hot if they're not completely dry so and I was also thinking guys like She works on these tirelessly to create a bunch of them And I was thinking of making update videos every time she has a new batch we can go over these Kind of individually and see how they look all the different ones that come out. I Really like this one again like the one I showed them in my video the other day That's so cool Alright, and now how long are we gonna wait for this to do its thing? He's small it shouldn't take as long as others, but it is also cold or wet or weather Mm-hmm. So you should give it a few hours at least few hours All right, so we're gonna give this probably around like two hours I'd say and then I'll be back and probably I'm gonna have to turn the light on because it's gonna probably be getting dark by that time I'll see you guys then All right guys, so it's been about almost two hours So we're gonna go ahead and open it up and see if it came out, right? It might need a little bit more time, but hopefully it's gonna work out right Sticky on the one side. You want to flip it over to the other? Oh, hey check it out. Yeah, these are two separate parts So we're gonna get some tools out right now and see if we can't pry that out of there But look at that shape look at that So we remove the excess at the bottom because that's just the piece or the portion where we poured it in And then we just kind of peel it off and let's go ahead and zoom in on it look at that You can even see some of the details on the wheels as well It's kind of hard to focus in like really close. I think if I hold it still we can get it focused in Yeah, there we go Check that out and some of the imperfections on here They can be filed out or you can use the tools on them while it's wet like that seam line in the front Usually after it's dried you have to clean it up a little bit. Yeah. Yeah, we still got to get this out And then that has a bottom on it Kind of looks like a I don't know like a pistol or something like a Half semi pistol. It's kind of satisfying how it just like kind of peels off of there Sometimes it won't and you have to use a tool, but yeah And then that actually at the bottom of that does it actually have an indent? It's got a okay You can actually probably peel that out of there Or you can actually connect both of them into a solid piece But if you technically do it with holes to where you can make it also to where it's like something that could possibly move Oh, yeah, I guess you're right Look at that Try to get a really good zoomed-in shot my camera since the lighting in here is not great doesn't want to Focus in too much Look at that that's so cool And that's just one like I said out of all these other guys that are up here Like I said, these chess pieces the other day. These are my favorite right here. Oh, this is a Creme. Oh, yeah, I remember I showed that yesterday because the actual thing comes out of the cow's mouth And then we just he's put milk in that Yeah, I want to go over all of the rest of these guys eventually and kind of show them off and I think you guys would really enjoy that But yeah, this is what we made today and it only took about Two and a half hours, so imagine how many things you could make with all of these over 2,000 molds that we got in here All right guys, don't forget to hit that subscribe button Give it a thumbs up if you liked it share it with your friends Let me know, you know, what other cool things that you think I should do, you know with these molds and Thanks so much for Tori's mom for my fiance's mom for helping out with this and I'll see you guys In the next video