 Well, look at that. I don't know if I shared with you guys how I Fix this, but I took the stuff called fuse it which is the same stuff. I used on the Astro turf on the roof and I just put down a bunch of cocking here in here and then put like a hundred pounds Sacks on it overnight Reinstalled it. It's working. I'm happy Next up you see this No, you obviously you don't there you do Okay, so this is a RV water inlet. It's missing a piece in the middle. It's in the back. I'll show you why This is probably the wrong kind of cement, but I'm gonna use it anyways. It is a black PVC Adhesive this I'm gonna drill into the wall In the bus and then it closes. This is Where I'll be putting the water in there to fill up the water tanks to the left top left is a air vent all right, here is the Vent piece and I'm actually glad I did not glue it yet Because this has to fit through the other piece. So I'm gonna pause. I'm glad I didn't Didn't do that yet. That would have been bad. So I have this rigged up. It's gonna go this and This is the wrong size. So that actually will fit in there. Unfortunately. See that we don't want that We want it to go into this Tubing but the tubing is too large. See that? So what I rigged up was a double-sided thing It's basically this I'm gonna glue it. It's gonna fit inside Everything is gonna be wonderful and happy. I just have this piece of Thing there just to be extra secure. I guess probably don't need it. It's gonna go like this. It's gonna be glued It's gonna be awesome. It's gonna go Right up there that right there is my outline Vertical I got to cut through here. Let me show you the other side of that. See how level we are We are a little bit down from there No, no far So let's follow that around So we will be cutting out right here somewhere Right by the pizza emoji And that means I got a drill first and then I got to go to Home Depot and rent a jigsaw and cut through but I think first we'll just Take a drill and make four points there and then connect them afterwards since After rent a tool What is will be part of the work Here for being on the clock, you know what I mean? So I'm just gonna leave this So Always zoomed in and here we go. All right, let's drill All right guys, here we go here is the damage the damage is done And by damage I mean amazing this so I think I think I got lucky too because That could get in the way of this little plastic thing Right put it Right here Hopefully And I think I totally Lucked out. Look at that. It's gonna be nice and flush See that? Yes. All right, so I Have to go back to the hardware store. I've done like more than 10 trips in two days and I'm not Upset that I haven't brought you with me because that would have just been a Yeah, compared to very little work that I've done. So I'm gonna go get a Jigsaw. I'll see you guys back here. I'm back from the depot Turns out they don't rent jigsaws Obviously gonna myself Sheerly you can't be serious. So I got a pair of shears instead. Yeah, I don't really know if this is gonna work Perhaps perhaps not Perhaps perhaps not I'm gonna put this down for a second. So we have the ugliest hole known to mankind All right, here's the update. Definitely not the cleanest job Didn't have the right tools and it wasn't about to buy a hundred something dollar jigsaw Just to fix one silly thing here So that's what we're looking like right now Even just gonna back in the cell. All right, here's what it looks like It's kind of mounted Just for fun so Just kind of press it in there and get it back in there And then that shuts and then locks. So clearly I'm gonna have to put some kind of caulking adhesive silicone around the edges and Then on the inside If I can get up here Looks like I'm gonna have to cut out a little bit more of this bottom part there Possibly some of this wood too because My little attachment friend Is not going to fit like that. So Get out the drill again. All right proper size hole is drilled and the wood has been bored out a little bit for the down pipe next step I'm going to glue this to this here we go a little messy, but Think this is gonna work only one way to find out All right guys, this is what the setup looks like. I still have to put some silicone on the outside Well out for change shower today for shower they Know if I lock this Anyways, you guys get the idea though it goes into this grotesque looking hole that I made Just like so and then it will be drilled into place Here here here here here here here once this door is open and the Inlet right there is glued on with some threaded posing With it an adapter in a larger size, which goes down all the way right there so Then the pump takes water out of this corner right here It's a self-regulating pump And a little on-off switch is gonna go here, so that's it for right now Had another exhausting day tons of errands I'm super tired It's been a long day So I see you guys manana Once this is done I'm hitting the road again, and then it's back to the schedule programming of adventure of van life of traveling daily vlogs and Looking forward to a very exciting summer fall and winter and hopefully by then I can start to make money from this channel and Then I can be doing this indefinitely. All right. Thank you guys later