 Γεια σας και καλωσμόνω back, είναι Vicky εδώ με ένα άλλο σπιχνό σπιχνόνι. Όπως πιστεύω θα συγκοτήσω πιο χωρίς σπιχνόνι σπιχνόνι σπιχνόνι. Είναι ένα που είχα πριν έκανε για 1 ευρώ. Μπορείς να χρησιμοποιήσεις ένα παντ στο ένα σπίτι και then το βάθεις στον σπιχνόνι σου, αν θέλεις. Αλλά εγώ πιστεύω να φραντίσω αυτά και να κομμάσω τη σπιχνόνι μου για τα χωρίς, γιατί δεν θα πω να πω τα παντ και όχι. Λοιπόν για αυτό θα δούμε ένα 6x6 σπιχνόνι, σπιχνόνι σπιχνόνι. Για το παίκρας θα πω με την σπίτι μου με τα διστρέσταση οξιδεία σπιχνόνι και να εσύ να σκοτήσεις τα παντ καλύτερα πριν να ξεχνάσεις. Τώρα όλα τα παντ που είμαι δουλειάζονται σήμερα είναι σε μεγάλη χαρά, επειδή είναι Βραγφρύτερη. Για παράδειγμα όλες τα παντ είναι 40% ευρώ. Έχω δημιουργήσει ένα κομμάτι με όλες τα σχέδια στην κατάσταση μας και θα βρεις ένα βιντεί σε αυτό, δεύτερο από τη δημιουργία. Λοιπόν, είμαι παρακολουθώ με τα σπράσια μου, όπως μπορείτε να δείτε, μέχρι την κομμάτι, για να κοιμήσω όλα τα σχέδια που υπήρχε. Και εγώ δημιουργήσω με τρεις κόλες εδώ. Αυτό είναι τα σχέδια τάμβολα, τα σχέδια σχέδια και τα σχέδια σπρούσια. Τώρα δεν ξέρω αν έχετε παρακολουθώ, αλλά η πρώτη σχέδια ήταν απλά νερός. Θα ήθελα να έχω τα σχέδια μου πολύ νερός, ώστε να βοηθώ όλα τα σχέδια που υπήρχε πιο καλύτερος. Δεν θέλω να πω πώς αυτή η πρώτη σχέδια θα δείξει. Θέλω να δείξω και μετά να συνεχίσω με περισσότερες σχέδια στον κομμάτι. Επίσης, χρησιμοποιηθώ με τα τρεις σχέδια σπράσια. Δεν θα δημιουργήσω κάθε νέο κόλω. Και ευρώ θα χρησιμοποιηθώ με το σχέδιο μου. Αυτό είναι σχέδιο, αλλά έχει δύο σχέδια, δημιουργήσει ένα σχέδιο με ένα σχέδιο και ένας άλλος. Είναι αγιόλιο να σκοτήσει πράγματα, λοιπόν αυτό είναι why I'm using it here. Τώρα, ευκολου αρέσει πώς η καρδιά μου δείχνει στον κομμάτι, πολύ εύκολο και εύκολο να κάνω. Και τώρα θα δούμε μετά να δούμε πιο καλύτεροι τεκνικές για να δημιουργήσω σχέδια. Τώρα θα κάνω κάποιο σχέδιο. Αυτή είναι η τεκνική που θέλω να κάνω στον κομμάτι μου. Θέλω να έχω σχέδια εύκολα. Ενώ βλέπω ότι βρήκεται να βάθω στο κομμάτι, στο κομμάτι μου, αυτό also creats a lovely border, a lovely frame and I'm working with Phage Chins, which is one of the colors that I used for the background and I'm also going to reduce black suit just to darken up things even more. So here I'm working with one of the new stencils from the Christmas collection by Tim Holtz. I place it on top of my page and I'm going mainly at the edges all around, making sure that I don't go over the center since I want to have a lighter area there. Now I'm going to lay on top this stencil again and this time I'm going to go over it and do the same thing with black suit this time. I'm making sure that the don't go as further in as I did with the blue ink. So I'm creating kind of a frame all around and I will do the same thing with my blending tool towards the edge without using a stencil. Now remember that although everything looks quite vibrant to the moment, this is the stress oxide ink which fades out as it dries. So you will see at the end, it's not going to look as vibrant as it is now. Now another go-to technique to add more interest on the background is to do some stamping. For this page, I decided to go with some sentiments from this stamp set. This is another stamp set from a previous collection by Tim Holtz. It is the Scribble Woodland but you can use any stamp with holiday sentiments that you have. I'm just going to use black ink and stamp in different areas at the background as you can see here. This makes it look more interesting but it's not busy. Another fun technique that you can do with the stress oxide sprays is to add some water. This is clean water. I'm going to let it react with the ink underneath for a few seconds and then blot it. The more time I let the water react with the ink underneath, the more ink I'm able to lift with my paper. So that's why I'm working quite quickly since I don't want to have white spots there. Now I am quite happy with how my background looks at the moment. I will leave it aside to completely try and I will work on my focal point. Now for the focal point, I decided to go with the C-6 die and I'm going to cut it out of craft cardstock just to get a basic color in the beginning. Of course, you can start with white cardstock and color it completely later on. Now I'm going to do some ink ink over my reindeer. For that, I'm using the stress oxide inks. The color I'm using here is vintage photo and the darker one that I will bring in for the shadows is ground espresso. So I'm going to do his antlers with that. I'm going to use it to add some shadows underneath his belly and around the edges of the die cut. And I'm also going to do his toes. And of course, for this step, you can use pattern paper if you like to die cut the reindeer. You can also use your acrylic paint to color it in. Just use whatever you have for your watercolors. Anything works. Now I'm going to talk a little bit about how you can seal those distress oxides. So I will show you two different methods. Both of them work beautifully. The first one is to cover up your area with matte medium. So this is a completely dry brush. Do not dip it in water. This is very important because water reacts with the stress ink. It's going to move it. It's going to smudge it. And you will lose all those beautiful details and shadows that you have been working on. So I'm very lightly applying matte medium over my reindeer. This is going to give him kind of a sudden finish when it tries. It's not going to be close at all. And he's going to be permanent without reacting with any medium that you decide to put on top. Always remember to put the brush in water. This is going to prevent the pristles from sticking with that matte medium. I always dip everything in water. And when I finish working on my project I can then go to the sink and wash everything properly. Now another thing that you can use to seal down distress oxides is distress microglace. This is a product that you can apply with your finger or with a blending tool. I'm just using a very tiny blending tool here by Nouveau that fits inside. But the regular blending tools by Ranger fit as well. So just use anything that works for you. I'm going to get a good amount. I'm going to work it out in the sponge making sure that it is nice and enter wet. And then I'm going to apply it all over my background. Now by sealing down my background I make sure that no matter what I do on top of it it's not going to move, smudge or react with the background. So for example, if I do some white splashes over it the splashes are going to stay white. They are not going to react with the distress oxide spray that it is underneath. Also another example if I apply embossing paste white embossing paste it's not going to react with the ink underneath and turn into blue. And you can see I can even go over it with my fingers. I can feel the product this way and I can make sure that I have applied it all over the place. I'm also using a clean paper towel just to buff off the excess and I'm ready to go. Now this is where I decided that I wanted to add some extra shadows on my reindeer. It's a technique that I go back to again and again I absolutely love it. I'm using here my Big Brush Marker. This is a product by Faber-Caster and it comes also with a big nib as well as in a smaller nib. The marker that I'm using is Indian Red. I am applying my shadows. I am smudging it with my finger and although it doesn't dry super quickly so I have a window of smudging there once it dries it's going to be completely permanent. Now I'm going to bring in a darker shade of brown and this is walnut brown I believe and I'm going to add some shadows on his antlers as well as on his toes. Now if you are not familiar with this technique which I have shown many times in my videos just make sure that you work over matme doom or a non-porous surface that allows me to smudge my ink around. Also make sure that your matme doom underneath is completely dry otherwise you will ruin your markers which is not something that you want to do. So I'm going to leave him aside and do some more fun techniques on my background. So here I have some white paint. This is acrylic paint and I'm applying it with a very thin brush all over the background to add some white splashes. These splashes are going to stay completely white. These splashes are not going to react with the ink underneath and turn into blue. They are going to stay nice and bright just because I have the micro glaze underneath. Now I'm going to use my heat gun make sure that all the splashes are completely dry so that I can move on and do some stenciling. Now again I'm using my Stars stencil again by Tim Holtz. I use it in the previous art journal and I'm using it again. I absolutely love this stencil. I'm going over it all around the edges of my page and I'm just applying some paste there. This is white paste by Altenew. You can use modeling paste or anything that you have or you can even use glitter paste if you want to add some sparkle. I let the paste to completely dry and now I'm ready to start sticking things down. I used foam tape at the back of my reindeer just to have a little bit of dimension. I'm going to stick him down and I'm going to talk a little bit about that sticking down thing over micro glaze in a bit. For now I'm going to add a dot of glue on his nose and this is when I decided that I want to turn him into Rudolph. So I used some glitter cardstock and cut out a tiny little dot and of course you can use glitter paste for that or your NuvoDrops or your Stickles, whatever you have. And now I have Rudolph up in the sky. I'm using a black marker and creating a little dot so my reindeer has an eye now. Now having micro glaze at the background makes things quite difficult when it comes to sticking down. So since I had foam tape there it didn't stick quite nicely so I removed the reindeer. I added white glue over my foam tape and put it back on. Now I'm sure that it's not going to fall. Now to make my page more interesting I'm going to create a little cluster of elements. For that I'm using stickers from the Christmas sticker book. I'm going to pick up a couple of them just place them one on top of the other playing around trying to decide what looks good. And again having micro glaze underneath you see I can easily lift it so just to make sure that I'm not going to lose my element. I added a piece of cardboard at the back for some dimension and glue. And now I'm sure that this is going to stay put. I also picked one more sticker from the sticker book just to bring more red into my page. And you can leave it as it is or you can embellish it even more like I'm going to do now. I always have fun when I'm creating my original pages so I can go on and on adding even more details. So here I used a dye by Cizix and this is called Large Funky Festive. I used one dye from the set to cut out these three leaves and now I'm going over them with white jesso but you can use acrylic paint if you like. I'm just dubbing the color in different areas. I don't want to cover up completely the craft cutstock but I want to have the look of snow. Now I'm going to use my scissors to cut all those leaves into pieces since they are quite big for my page as they are. And then I'm going to tuck him underneath the stickers on the top and at the bottom. And notice that I didn't cut them out of green. I don't have any green on my page and I don't want to introduce any new colors. That's why I went completely neutral with these leaves. So I'm using my Nouveau Deluxe Glue to stick everything down. And I'm going to bring one more element. This is a metal token from the Christmas collection. I'm going to pick one of them. This one has holiday magic engraved on top of it. So I'm going over it with Gesso making sure that Gesso goes inside that engraving. Now I'm going to pick up some baby wipe and clean up the top. But Gesso remains in the nooks and crannies of the engraved sentiment so you can easily read it now. I'm going to thread some twine and place it with some foam squares at the back. And over the foam square I do add white glue just to make sure that this is going to stay put. Again, I have microglades at the back. Nothing sticks easily there. I have three pieces of twine here all in three different colors, but neutral colors. I'm going to tie a knot and this is going to look as if it is scarf. Now if you love details another thing that you can do here is to add a tiny little bell on his neck. I didn't have a mini one. All the ones that I had were too big for his neck. So I'm just going to leave it as it is. Okay, now I'm going to do the final step. I'm going to add a few gems here and there. Not too many since I don't want to make it too busy. And after that step I convinced myself that I have to call this page done. As always down below you will find a list of all the products that I used for this project. And you will also find a link to the blog post where I have put together the Black Friday list of deals. Make sure to shop around. I'm sure you will find the products that you want in great prices. So that's my project for today and I'm going to frame it and decorate my house. And don't forget that this idea would work on a canvas, would work on a book journal, take the idea and make it your own. So I hope you had fun, that you got inspired. Don't forget to leave my comment, to like and subscribe if you haven't done so already. Thank you all so much for joining me today and I'll see you all next time.