 Γεια σας my crafty friends and welcome back to another card making video. Today I am making the most out of one dice set and I will be playing with these studio light dice that give you lots of different designs for Christmas trees along with ornaments and stars to play with. And I am going to create three different cards trying to go through different styles και τεκνικές και να σας δείξουν κάποιες ιδέες για το τι μπορείτε να κάνετε με τα χρόνια της Κρυσματίας. Τώρα, αυτή η βίντεο είναι also part of a videohop by Studio Light. Λύτε ένα κομματισμό εγώ για την εποχή για να γνωρίζετε χρήμα. Θα βρεις όλες τα πράγματα για πώς να βρεις τα δεξιότητα εγώ από τη δησκρίπτωση. Λοιπόν, για το πρώτο καλύτερο καλύτερο εγώ για ένα βίντεο στυλ και αυτό θα είναι ένα βίντεο καλύτερο. Μπορείτε εύκολα να βρεις ένα στυλό καλύτερο, αν θέλεις. Και αν βρεις για ένα βίντεο στυλό, ξεκινάτε με το κραύμα της Κρυσματίας. Λοιπόν, θα χρησιμοποιήσω ένα τεξ-σταμπ και θα σημανήσω ένα λίγο στο καλύτερο καλύτερο. Δεν θέλω να μείνω με την καλύτερη εμπειρία, δηλαδή θα χρησιμοποιήσω ένα σκραπίσμα της Κρυσματίας και θα μιλήσω σε διάφορες περιοδές. Η χρώση που εγγραφίσω είναι η εμπειρία της εμπειρίας και αυτή είναι η βίντεο στυλό. Και θα σημανήσω με το τεξ-σταμπ στο κόμμα μου. Και θα εξεχθώ την ίδια πρόσσοση, στο κόμμα της εμπειρίας. Επίσης θα κάνω το ίδιο με το σκραπίσμα της Κρυσματίας, θα σημανήσω να αφήνω ένα λίγο από τη εμπειρία, γιατί δεν θα έχω την καλύτερη εμπειρία. Και αυτό το τεξ-σταμπ είναι ένα τεξ-σταμπ πραγματικά από τις ευσέντρες από η Γιολάντα, από ένα προηγιό στυλό. Είναι ένα από τα τεξ-σταμπ που μπορείς να χρησιμοποιείς και πάνω. Τώρα, έχω ένα άλλο σκραπίσμα. Αυτό είναι ένα τεξ-σταμπ, που είναι καλύτερο για την Κρυσματία και αυτό είναι από το Κρυσματία, από το Στουδο-λάιτ. Και θα προσπαθώ να πω το οποίο θα παίρνω. Ξεύχω να πω αυτό. Τώρα, θα σταματήσω αυτό στο καλύτερο. Επίσης, εγώ βοηθήσω στο βασικό τεξ-σταμπ. Λοιπόν, δεν πάω για την καλύτερη εμπειρία. Δεν θέλω αυτό να είναι πολύ βιβραντικό. Επίσης, θα πάω με πραγματικά. Αυτό είναι ένα βίνταξ-φωτο. Και με το ίνκ-πατ, θα κάνω κάποια εμπειρία, όλοι εκεί. Ξεύχω ότι δεν χρησιμοποιηθώ με το ίνκ-πατ. Αυτό είναι το ορισμό της εμπειρίας. Εγώ βάζω τα ειδικά όπου έτρα, όπως και όλα τα ειδικά από αυτή η δουλειά. Και να βάζω τον δημό του βασικού τεξ-σταμπ. Ξεύχω το ίνκ-πατ or το γλασσμα. Τώρα θα τα απλάξω λίγο βασικό τεξ-σταμπ και θα θα μιλάω σε πλάσεις όλα στο βασικό τεξ-σταμπ. Και θα φύγω να το βασικό τεξ-σταμπ με αξιωτικό τεξ-σταμπ. Τώρα, θα χρησιμοποιήσω με την καλύτερη εμπειρία Απ' η Μαρλίνη μου, εγγραφήσαω με νερό και εγγραφή εξογραφή και θα δώσω τα πλασά πέρα. Αυτό θα δώσω το νερό και φύλλο του σνόμου. Εδώ είναι ένα κλεισόνι στο μπροστά μου, έναν φύλλο βιντατζι, με μπροστά μεταλλογραφή. Τώρα έχω ένα νερό, καρδιά, και θα κοτω ένα τρί, επειδή χρησιμοποιώ το ίδιο όπως έγιναν για το κόμμα. Είμαι φτιάχνος μου καρδιά, από το κραύμα καρδιά, Αυτό θα είναι ένα κορύφος με ένα καρδί που λάγεται 4.5x5. Τώρα εξαφερήσω το πάνελο βίντεο στον πίσω και μπορεί να βλέπεις ότι είναι λίγο πιο σύννομα για να μεταφερήσει ένα κορύφος και μετά στον πίσω θα πω το κορύφος. Θα ανοίξω το κορύφος και να το ρωθώ με το κορύφος μου. Θα ανοίξω το κορύφος για να ανοίξω ότι θα ανοίξω ένα κορύφος που έχει το σχέδιο από το κορύφος μόνο από το κορύφος και φυσικά θα ανοίξω όλα τα πράγματα από το κορύφος και φυσικά θα ανοίξω όλα το κορύφος με κάποιο κορύφος για να ανοίξω ότι δεν θα ανοίξω με το κορύφος μου. Για να φτιάξω το ίδιο σύννομα όπως το κορύφος του κορύφου, θα ανοίξω ένα λίγο βίντεο στον πίσω around the edges of my cut-out tree και αυτό θα ανοίξει καλύτερα inside that window. Ξέρια ότι έχω μην ακολουθθέσει έναιχείρο σε βάνα, θα ανοίξω το ανοίξω αυτό και όταν ανοίξω το βάμε, θα μπορείς να μεταυχάζει το τρίνο, αυτό θα ανοίξει στο καινούαμενο στον πίσω ένα κορυφότωabol. Και μπορείς να μεταφαλείτε ότι το βίντεο όπως είναι ανοίξη, θα νιώθω να ανοίξω να ανοίξω ένα να ανοίξω, για να μπορώ να το κοβω και αυτό θα προσφασιστεί για εμένα, μετά από να βρεις κάποιες αυτοκλήτες στον αυτοκλήτρο της καρδιά. Λοιπόν, θα απαθήσω δυο πιστές του τελευταία στήρια και θα απαθήσω το ασυντάκι. Είμαι σκορδεύτας με ένα σύνθετο αυτοκλήτρο της καρδιάς της καρδιάς, για να απαθεί στήρια στήρια στήρια μέσα από το κόμπο. Και όλα έχω να κάνω είναι να κλούω αυτό το κόμπο στο κόμπο μου. Και αυτό είναι όπου μπορείς να κάνεις πολλές διαφορές από αυτήν την συμφωνία. Μπορείς να χρησιμοποιήσεις φόμπταση και να χρησιμοποιήσεις κάποια σχετικότητα inside. Η στιγμή που έγινε was to shunt which that acetate in between the front flap and the panel that I placed on top. Και μπορείς να δείτε το τρίο από το inside of the cart. Now I'm going to grab my die set again and this time I'm going with that garland. I'm going to cut it out from a gold glitter cart stock and I will also cut out one of the tiny stars. So you can use all those little pieces to decorate your tree. You can either stick those pieces on the inside directly on top of the tree or like I'm doing here I'm going to add all the decorations on top of the acetate. For my star I used a tiny little foam tape underneath so it is popped there and I do have one extra star so that I can decorate the tree on the inside of my cart. Now if you look at the back through that window you can probably tell where the glue is. If that bothers you you can cut out extra ornaments, they are symmetrical so you can easily stick them at the back and you won't be able to see the back of those ornaments at all. And of course you can stop at this stage just add the sentiment and you are good to go. You can take it a step further and I'm going to bring another die set from the latest release by Studio Light and this is a set that you can grab again and again because they have the perfect leaves and branches for Christmas compositions. They are great fillers and that's exactly what I'm going to do. I did die cut this die from a green cart stock and from vanilla cart stock. I added some vintage photo very lightly so that they all have the same look and feel and then I'm going to arrange them at the bottom. And of course here you can make it as fluffy as you like you can add even more branches or different ones. There are some lovely branches with berries. I decided to leave it as it is and as a sentiment I'm going to use one of these stamps. I am going with the one that I used for the background. I will stamp it two times and use a circle die to cut it out. With my scissors I'm cutting out what looks like a banner on this stamp so that I can pop it with foam tape on top of the other stamp just to make it look more special to add that extra something. And this reads Happy Holidays December 25 so it works as a sentiment. And this will go at the center of the branches. Here is a close-up look on this cart. I did add some gems as a last-minute finishing touch. I'm going to add some close-up photos of this cart and you can have a similar design with an ornament die for example. Instead of using those branches at the bottom you can add them at the top of your ornament. And as promised I'm going to make the most out of these dies so let's make another cart using a completely different style. This time I'm going for a more clean and simple look not a vintage one. So I grabbed this DIY block paper pad this is from the latest Christmas collection by Studio Light and I tried to find a quite tough busy background. I like this one especially because it has a solid background on one side and it is very busy on the other side and I will use both those sides for this project. I'm going to die cut this tree many many times. I actually used six of those trees that I cut out but you can go ahead and make it even fluffier. We are going for a three-dimensional tree here and the shape of it just because it is so symmetrical makes it perfect for this technique. So all I'm doing is to fold those trees in half and I alternate the way I'm folding them. For half of them I have the solid color on the outside and for the others I have the patterned one. So here you see I have five of them folded in half and you can see how they alternate solid to patterned paper. Now I am going to use one more tree which is going to walk us a base and I'm going to stick all those folded trees one next to the other. It's a really fun technique and ends up with beautiful fluffy trees The more folded pieces you use the fluffier your tree will be. I'm using glue, white glue, just because it makes life easier when you try to stick one tree on top of the other you can easily slide them until you have the perfect alignment and I'm going to stick the last one here. Now this is where I decided I didn't need to add any more of those trees. I find it is really fluffy and lovely as it looks at the moment but of course you can glue the two last pieces together and end up with an all-around ornament. However I'm going to stick that on top of my base and end up having a three-dimensional element which is perfect as a focal point on top of my card. Now the fun part is that you can make it fit inside an envelope. So now I'm grabbing my paper pad again and I'm going to look through those patterned papers included. I know that everything matches perfectly with my tree since I did use patterned paper from this paper pad. I decided to go with this one a lovely subtle design with white stars and I'm going to cut out a piece without destroying the elves I might use them for another project. The fun part about this paper pad is that it gives you lots and lots of designs that you can easily pop out and decorate your card so I can have a little elf along with my tree or little ornaments candy canes and stuff like that These are the DIY blocks by Studio Light There is a whole collection of them with lovely designs They have a seizure with an X on top that means that all designs are already cut out for you All you have to do is to just pop them up. So again for my sentiment I'm going with one of those circle stamps I'm going to stamp one that has a lovely deer a red ink I just popped out this little strip of patterned paper from the DIY blog and I'm also going to pop out one of those circle ones and now I have all the elements ready to go It's time to assemble my card I did use foam tape at the back of this panel Since I used a red ink to stamp my sentiment that's why I picked that strip and that circle to introduce a little bit more red on my card and this is one of those cluster cards as I call them where you find different elements and you just combine them all together almost one on top of the other creating layers and remember that although the tree looks so dimensional you can easily flatten it up and it is going to fluff up again when you take it out of the envelope So I'm going to place my sentiment down and I did combine it with the red circle underneath Again I did grab that die set with all those branches I used one of them to cut out branches out of white card stock and out of volume and again these are great fillers they are going to give something extra on another wise playing card I'm just tucking them underneath the sentiment and finally I finished off the card by adding some gems and here are some close up photos that three dimensional tree is a great focal point and you can make it with any pattern paper Now I am preparing my next card again a side folded card that's four and a quarter by five and a half and for the previous card I did use this DIY block which is the cozy christmas for my last card I'm going with this DIY block this is called happy christmas and it features all those lovely designs and I love the modern color combination Again it's one of those paper pots where you get lots of pattern papers but also elements that are already cut out for you and all you have to do is to pop them out and these are tags, burners, stars and lots and lots of elements that work as focal points So again I'm going to play with this one for this card and again of course I will use the christmas dies as I did for all the cards Remember look for that scissor with the X on top if you are looking for these paper pots by studio light Now I decided to go with this pattern paper that has a very subtle look of wood grain and I'm going to use one of my rectangle dies to cut out a piece Of course I have to be very careful not to ruin that little deer the tree I may use those as focal points on another card In those pots you do get two pages of its design However I'm always quite frugal with my pattern paper and I don't want to ruin a lovely design with no reason Now for this card I'm going for a spinner card We are going to end up having a tree spinning at the center of our card For that I laid on top of my card base the panel I cut out from the pattern paper then on top I'm securing the die I open up the card so that I don't cut out all the way through the back I'm going to run it through my die cutting machine and this is what I end up with So now I have a window or my actual card and a window on the pattern paper panel Now if you notice on the die set you get two dies for the same design I used the larger one to cut out those first windows Now I'm going to grab the smaller one and I will grab again the paper pad and look through for a lovely design For this card I want to avoid traditional colors so that's why I decided to use that pink pattern paper to cut out my trees You need two of those and I'm also going to pop out those lights to decorate my trees Now these lights are quite long so with just one of those cutouts so we can decorate both our trees I'm just using glue and I'm just going to lay it on top of my pink Christmas tree there and I will use my scissors to chop off the excess You can die cut ornaments if you like or even you can decorate them with sequins with gems, with pearls just do whatever you like on top of these Now here is how the mechanism works You need to have two identical shapes I do have the two trees here and they need to be symmetrical so when you stick them back to back they are going to lay on top of each other Then you need a piece of thread I did use some silver thread there and I'm applying some double sided tape along the tree at the back I'm going to peel that off and this is where I'm going to align the thread all the way from top to bottom Make sure that it's nicely centered You can see that it is already spinning of course we need to cover up the back and that's what we are going to do with the second tree For that I'm using glue all over the tree and I'm just going to lay one on top of the other By having that white glue helps me slide the two pieces until I'm happy with the alignment Now let's bring in the cart where we did cut out the window already Remember we did use the larger die so this fits nicely inside Align your spinner tree at the center of the window and I will secure it in place both at the top and at the bottom with some double sided tape You can use scotch tape for that Anything as long as those threads You can hold down Use your scissors to chop off the excess thread and then stick on top the top panel Now the basic spinner mechanism is ready You can leave it as it is Add sentiment underneath and you are good to go If you want however you can take it a step further and I'm going to show you what else I'm going to do for that So again I did grab the paper pad I know it has elements here You can feel of what I already have on top of my cart After all they all come from the same paper pad In any case whatever you choose to use as an embellishment for your cart make sure that you don't stick it in a way that blocks the spinning of your element Just make sure that you leave that window completely open And after playing along with some of the elements I decided to go with that Merry Christmas label Some of the gifts I usually pop out way more die cuts than I'm actually going to use so that I can audition them try and decide the final composition but I always stick a little envelope on the front flap of the paper pad so that they can add all those extra die cuts that I didn't use back in that envelope and keep them together with the rest of the paper pad And now the idea in a spinner cart is to spin it many many times before you put it inside an envelope then place it inside seal it and send it away when the recipient gets the cart and opens it the tree is going to start spinning the more you spin it before you place it inside the envelope the better the effect was going to be for the recipient So here are all the three cards that I made for today trying to move through different styles as well as different techniques Always focusing on the same die set to make the most out of it So these were the cards for today Down below in the description you will find links to everything I used Don't forget to like the video and leave a comment down below here on YouTube because this is part of a video hope and you may win prizes by Studio Light I hope that you had fun today that you got inspired and I'll see you all next time