 Hey guys Doing a little vlogging today. Well, I've got a video editing right now and I was going to do it last night, but it just it got so late and I was so tired So you'll see that later on today. Well, you have already seen it. I don't even know why I mentioned that so anyway I didn't go set up at the sale. It's about 9 30 right now. I got a guy coming to get the car so He asked me if I'd help him push it up on his dolly Why not just start it up and drive it on the dolly? All right. Yeah, it runs. He's just going to scrap it. So Anyway, it's going to be gone here shortly and I'll film that for you So I doubt if I'll go down to sale. He's supposed to be here anytime He said between 9 30 or 10 so But I'm just going to vlog all day today tomorrow. I'll do some vlogging too Tomorrow I got to go to game go to the specialist. So I'll vlog a bunch of that Maybe make a video depends on what we find on the way back. So Hopefully it'll be a good day. So anyway, that's what we're doing now. So I'm trying to get this thing to charge. I just put it on the battery was clear dad I I don't know if I left the interior light on or not, but It's only been on about five minutes It'll go here in a minute. So Let me get that taken care of And I'll set you over here and I'll film Loading that thing up and getting it gone. So Stay tuned more to come. It's been about 15 minutes. Let's see if this thing will start Be back with you when we load it up If the guy shows up he said between 9 30 and 10 it's about a quarter till 9 now, so we'll see Here we go. It's too late to go set up to sell stuff So let's build something or make something or fix something. Let's fix something. Let's fix the garage door That's what we'll do Okay guys, this is place the damn spider up there Okay, we got to put a roller in there that one's gone It may have come out of there someone may have taken it out. I don't know But it's the only one missing so we're gonna put a roller in here different ways a lot of guys will bend these tracks out I'm not gonna do that. There's only two screws holding this in So this is the one I'm gonna take these screws out. No this top one right here. All right, let me turn the light on Okay, so this top one right here. It's adjustable now. I could take it off See there's a screw there. I could just take that one off If I marked it, I may do that. I have to take one one bolt out I Can't get in there and see if there's a nut on the end of it There should be a nut on the end of it But it's kind of hard to get to so what I'll probably do is just take and that screw out and put the the roller in So let me get you guys set up on a stand and brush some cobwebs get rid of that spider And I'll show you how to do that. You can see that one Don't have one use some silicone on that silicone on this This is one of those It's not steel. It's supposed to be quieter, but it's not gonna matter because the other ones are steel But if I can get up here without falling you go Tighten this back up make sure you don't damn it if you're using one of these Don't tighten it too tight. You can strip them out some guys call them stove bolts Could have just marked that down there at the bottom put a line across there, but I wasn't gonna do that So this all we got to do this from this end and put it in that they came out up I was gonna do this in its own video, but I'm just gonna tighten this up. It's like that. Don't go if You're afraid of stripping them Just use a little ratchet or a wrench and just go just till it it's got some tension And you should be good. We can do something else. I want to show you something on the outside here Now this is what we got here now. See we don't have a key to that see this This is all what I'm gonna try to do It should be like that what I want to try to do is I got a piece of stainless steel in there And I'm gonna cut it, you know just to Put a patch there then I'm gonna drill a hole in it so this can go shit so this can go through and then I'll put a couple screws here So let me get everything I need for that And we'll try to get that fixed Okay guys, so I got the handle off of the other side already Let's pull this out, but I got to get inside here and check something real quick pull this out No, I'll show you how it hooks on I Didn't hit record. It's to become these holes here. I'll show you what they do Let me get the other piece Okay, so here's what we got this goes in here like this and then Whichever hole you need you stick this little tiny pin It's not a roll pin, but you can use a roll pin. It just goes in there and you tap that down so it's got like splines on it That's what holds it tight inside there but It was in that hole there. It was in the last hole So it's going to go in don't lose that pin. Of course you could use a nail or something But you know it's going to go in there And it's going to get tapped down How there'll be a washer on the inside now when we get ready to put this on I'll take you on the inside And I'll show you how this goes. Okay, so on to the next step of Putting our plate on here Okay I'll show you the plate that I made Okay, this is the plate I made I cut it out of a piece of stainless. This will peel off So it'll look okay. I'm gonna put this on here and I'm just going to screw it in in the four corners and I'll put that Thing back through The handle back through but what I'm going to do is so I know exactly where the hole is I'm going to draw it from the inside out Okay, I'll show you what we got on the inside. It's going to come through here I'm going to draw it right straight through there and that's where that That square piece comes through Right through there like that, then you turn it and when you turn it it pulls these These out and they lot latch in to that section there So let me get my drill How to way to keep this from going up. I'll probably put a pair of ice grips on it or something and thinking cobwebs and Then we'll we'll get well. I'm going to put this on first Then I'll get a drill and we'll drill that out. So let me get the tools that I need and Then we'll go from there Okay, guys, I've drilled four holes In the corner of this thing And I've got my I've got some self-tappers here These are just starter holes like pilot holes got some self-tappers here. I'm not going to drill this so These are the best ones. I got I should maybe go a little bigger, but It is what it is right it's still going to be better than it was so let's get this on here and I want to go Kind of about center of that hole All right, if this was more exposed we've got the overhang here the eaves Damn it That kind of protects this I would put some caulking on it, but as you can see that big old hole there I've never had any issue With water going in it. So I'm not worried about if anything else. This will help it and to do this here. I May have to let me get this started first All right, so I got this one started Like I said, I'm gonna go about you know what I mean middle here So and I've measured this like I said, I saved you You know from listening in the grinder all I did was cut it three inches wide six inches long. I May have to drill a pilot hole in this. I'm not sure. I really don't want to I Get it started with one of these first and I didn't quite get over where I wanted to get over to All right, we're just gonna move it over a little bit. I'm gonna do that. I dropped one screw I don't know where it went. I've seen it a second ago. There goes another one But they're so long and tighter than I thought they would that where's the other one? I did put a pair of ice grips to hold the door up. Let me find my screw. All right now Let's go in and drill from the inside out here as you can see that bothered me. I straightened it back up So it's pretty good now put this on So what I'm gonna do is I'm gonna stick this in there Just like that and I'm gonna put maybe Yes, I'm gonna put these screws in to that. There's one Get this in here straight. I know these are the wrong screws and stuff But like I said, it's just a patch because I want to want to eventually Put a whole new panel in this maybe a whole new door Because she's wanting she calls it a left. I call it a garage door opener There's that Now ready to get this screwed in now. I may Put one on each side of this. I don't know. We'll just have to see how it opens. I'll put this in let's go inside here and Let's go ahead and put the other pieces back on it. Okay now there's supposed to be a washer on here, but My dumb ass went lost it. This is the way it's going to go I'll have to find it and I'll put a new one on it or If I can't find it, I'll put a new one on it. It's gonna go like that Now we got to get our handle We're gonna put our handle on we want to stick our little pin Down in the hole. I guess it wasn't lined up. It's lined up for the second one, but see how it's How it's kind of I don't want that I want it. I guess they're good. I think I'm only seeing two holes there So let's try to get that in there. I can't get it lined up It's just one of those things you got to play with because I can't look down at the top It'd be nice if I had somebody out there holding Holding this for me. You guys want to go do that. Let's try this again I'm not I'm not going to cut this out because I want to show you it can be a pain in the ass just to Oh, just stick that little Just stick that little pin in there Come on. It's easy. Yeah, see it'll go in that one, but then that's just way too much play so I have to uh Put you guys on Fast forward here because this is pretty freaking boring. Oh great drop the pin. Hang on. I'll be back okay, guys I couldn't find a pin so I've got a compromise you can buy that stuff and We'll use me a nail for now Probably won't lose this nail because I got like eight million of them, you know So let me get a light so I can shine up through the bottom. So I'll know if that hole is lined up or not It's lined up. Perfect. I don't know why it's not going in and I can see Down through there that it is lined up. So I'm going to keep messing with this I'll turn you back on as soon as I get it found the washer guys We're going to put the washer on there. I'm sure that's pulled clear back Get this put back on here Now I'm going to try to take this longer nail And I'm going to try to show it up through the bottom And line it up that way since it's got a point on it. It might line up a lot easier. I don't know We'll have to see All right, let me keep messing with this guys. I don't want to bore you Okay, change the plans I stuck this one down in the bottom to line it up And it went started going up through so I'm going to go ahead and stick this up in here Cut this off right there with my cut-off wheel Which I'm going to go get right now. So this is how this works when you when you turn these Like this see watch it pulls that out See it acts like a little winch and it pulls both sides out and that's how I open So that took a little longer than it should have I peed that nail head over a little bit so that shouldn't fall out. All right. So there's another project Let's see what else we can do today. I've logged here, but It was just a pain in the ass getting that You know It seemed like once I put the washer in it was easier, but it was lined up I just maybe there was something wrong with the nail I was trying to put in But as soon as I put that nail up through the bottom It worked So I don't know where the pin is but that nail is going to work fine I know it's not the right way to do this shit guys, but come on, you know Eventually we're probably going to put a whole new garage door in it So which we was going to buy one one time, but the woman already had it sold so Um, yeah, that panel needs to be replaced. It's kind of dinged up I'd like to replace a couple panels if not the whole door Eventually so but you know, it's better than that thing flopping around because before I locked my out Myself out of the house a couple times and you could wiggle that It would actually pull those those cables enough to where it would it would release the door and go up It ain't gonna do that now. So there you guys go. There's There's that project Let's see what else we can get into and yes for those of you wondering I did clean the protective coating off of that. So and I did put a couple more I put four more screws in it Like I said, it's just a temporary fix. It's not permanent by any means because as wallowed out as that was What happens is You know, there's nothing there to hold the screws You know, so the only way to do it would be put bolts all the way through but The thing about it is when they get loose they start ripping that that's just aluminum And the only real actual way to fix that would be put a whole new panel in it. So I mean The garage door's not that bad a sheet other than that there is a ding here But that's in that same panel. So I can probably just get One more panel input in it. You have to adjust the door a little bit more There's kind of a more of a gap across there than over there But that's no big deal Just a little bit of adjustment, but um see this right here See how that gets ripped. That's because if you notice where it's at That's because that it it didn't have the uh Shoot that roller in it. So that's why it ripped right there Be replaced when I put a new door if I put a new door in it I may just put a new panel in it put an opener in it because that's the only panel that's bad I mean, yeah, it needs it needs washed off and repainted But that's the only reason why that panel is bad. So I may just change one panel in it and then paint it all and uh Then put the uh When I do that I'll bring you guys along with me Uh, my car's getting full. I'll bring you guys along with me when I put in the uh, as she calls it a lift I called a garage door opener, but I'll show you guys how to do that. Uh, all right Let's think of something else to do. I forgot to tell you. Yeah, I did peel that off and I didn't show it But it's off so Okay guys, it's a little early in the afternoon. It's only like uh 238 but Monkey's off a little early today. So she's coming She is going to be on her way home here shortly. She's going to stop by the store So I'm going to call this vlog right here. Uh, I think I said tomorrow I've got a Doctor's appointment, but it's not I think it's it's Wednesday. So Uh So that'll be cool. Um Well, not really cool, but We got to make a long road trip, but I'll film some of that for you guys and then uh, Thursday I have another appointment So See I won't be able to do the sale, but I'll do a sell Friday. So but um Wednesday and Thursday, I'll have I'll have some vlogs for you Um on my off days that I'm not doing like a how-to video or something like that I'll go ahead and do a vlog and I'm going to try to get uh try to get you know Do at least a video a day video or two a day for you guys to watch. So Uh, that being said, I appreciate you guys watching and uh Um, stay tuned. I haven't got a special shout out video. I'm going to be doing too for a couple of my subscribers Uh, you're all great. Appreciate it. Awesome. So that being said, I'm gonna say shea bearer the myth man legend I'm gone for now. Thanks again for watching guys appreciate it and y'all stay cool and we'll chat soon All right. Bye. Bye and take care guys