 I'm going to tell you what some note will be about this considering I've got through three flybats and a few different circuits for this to get you know just where I want to call a modern or a nice looking little Jacob's ladder or this type of effect this electron plasma ring. I'll give it a little thing on this, in case it gets any better. And I've got a few quite a few circuits trying to get one that gives me a thing that I can just leave on and look at it like a half hour to an hour later and just do a little bit of that keep check there's no fans or anything and this is like it's not much warmer than the air around me it's not making it's not doing any hard work at all you can leave this still on for long periods of time and I think that's not really, I must admit it's not the biggest gap in the world with things like one and a half inches I'm not going to put a tape measure there because nearly when I've got it it's metal well it's not tape measuring there so okay but it's metal so I'm not using that I suppose I could put this in and I can measure the gap like this and then put a tape measure next to the bits so it's on the tip to do this little lineage here where is we going to get this the right way around so from there to there oh shit I forgot where it was oh let's say from there to there where is that line and from there to that line is yeah one and a half inches like I called it excellent can you see that one and a half inches I can't not be very straight there we go yeah this thing's been running for ages I've watched two Dr. Short's physics feed on I know about 20 minutes each that's 40 minutes and this one's cold it's not cold but it's not hot it's nothing that I think oh that's going to cause one the actual fact that this is wax in the end here and on the other ones I always had them dribbling out just at this same sort of a little bit less than this I don't know if it's because I've got more capacitance now but three two of them are point three mic and one of them is point three three mic and that two are rated at 800 volts and one's rated at 1200 volts it's not like that on purpose that's just how we're got the capacitors and lock them together and it's been running for ages and there's the camera's shit the camera don't pick this up oh sorry the camera's not very good for the end of the camera don't pick it up very well but it looks awesome in there it's like a big chunk of it has got all the lighting effects going on in different colors but starts off really hot that's been going on for ages I can leave that on the night I reckon but it's not all in the night all in the night when it cancels out a lot the flicker even though there is a little bit of a big arm now hey is anyone know what I can do about these little LED lights that have this flicker it's trying to know how you can't just the camera and it's gone off short somewhere else I've noticed as well and if anybody's listened to any of them or watched any of these videos or have done a bit of the jacons like the thing we thought you could always hear the power supply winding away there'll be more noise than what that does oh I should say making more noise than what that does sorry I've had a couple of few beers so the power supply is silent apart from the fan and that's a big change so big changes all over here if you have to take off this piece of metal from around the flyback now I know you can't see that even though I'm waving it in front of the camera I ain't my thing too there's a little bit of metal there that lives on the flyback through that light on the eyes that bit of metal you take that off and then put your turns on and that keeps everything cool the power supply should wind so much a bit more fast as it goes but that's why just that's a property that you wouldn't drink it's too cold it's too cold and the fronts the same couldn't do this before you used to run them for a while it would be getting too hot in some more videos you might have seen I've actually put fans trying to keep down things cooler but now there's no fans no nothing awesome and there's nothing special about it it's the mazini mazini ah I wish I could remember his name he sounded so sick there the same one the interweb mazini mazini yeah mazini zero voltage switching that's uh and just copy that just do that I've put 260 ends the MOSFETs rather than 250s and I've got three capacitors there I've got a I've already set it two point frees among point three three one's 1200 volts that's the point three three and the two point frees are 800 volts it's just old flyback nothing special and look look at the wax that's just wax out the candle it's not even melting it's not getting warm at all my everyone's melted glad they stuck to the board if you don't want to use to get that warm with less power in this so that's definitely noteworthy for anybody that's been having getting too warm problems or anything I've got six turns you can see six a side I don't know if you know that out anyone can blast it up it's only getting you know well just over four amps about 15 volts yeah I just don't see the point in like you know kicking the crap out the flybacks all the time just killing them maybe it won't happen though maybe I should be able to give it a bit more a bit more power return that off and turn this on and just look at the voltage a little bit and that'll make it work a bit harder I'm gonna give it some current to go with that so even though you get that sort of stuff looks pretty cool it's just gonna kill my flyback it's gonna kill my flyback it's pretty good it's looking pretty the best and I like putting together a camera and book so I'm gonna end up in the view like I had it before I don't know what I'm doing I didn't move the camera I used to move what I stand on which is just a torch I don't need proper camera stands over my arm I do not like I just like trapping about with this stuff I'm gonna give it a little steal my power supply we used the wine like crap but now it doesn't wine like crap no I can't keep doing that though because that'll you know that'll upset it it's got to I'm not telling paul because there's no real noticeable change no that is a definite that is absolute definite that goes there's absolutely no way before that the other flyback wouldn't have really heated up that is no real difference to what it was before I give it that little bit of extra juice it should have by rights um because it's still going on it's just under five five months when you want to store just over five months there like you can see as well good I just looked at someone she was here it's still you couldn't drink that as a real cold cup of tea I mean that is just off cold it's not I like that just off cold he's no warmer than me he's no warmer than me front and back coil and then coil is primal secondly no the caps will be fine I just don't want to touch them because uh I've literally just just pushed them in the top of the holes I am involved with one of them screwed in but the other two are just trapped on the top so I can take them on to different capacitors and see what they're like that's pretty good brilliant now I have definitely got me a little ornament I can just run and I can give it how many watts I want to use just by dropping that down a little bit but it's like a bit of the amperage away and that's just as good that it's peeking up four and a half I don't know what it is but if I go into another room and come back in here I don't smoke or anything so there's no smoke around the house but when I come back in here it smells fresh like a happy seaside fresh which is called bizarre maybe that's because it's a sunny day or something in the ozone and ultraviolet ozone lots of stuff but yeah awesome so I figured I'd show that because that is now a little if anybody wanted to build one of these and you're finding you get overheating problems yeah I reckon if you do like you know let's just give it a bit more welly again okay so we've been up in voltage let's go to 80 it says you can run these quite happily normally like 24 volts but can your flyback take it that's the problem isn't it can the flyback take it get a bit more amperage I don't want it just doing that I suppose because what's the maximum it can do I like it going up and down well okay not but I can do the cycle or the noise where it just does that should I touch it I don't know I don't think that's such a good idea because I would feel a fall so that's getting really hot what's happening here a little bit warmer tonight not really much difference but that's definitely getting really hot and I can imagine my cables will also be getting really hot so I'm gonna settle that down drop down the voltage no they're not no they're not they're really really cold they're just like as it should be no like they've been on the top look I don't know what it's like for everybody else with these things but I'm quite confident that I can run that a little bit more power I'm gonna take down a little bit the amperage and that's just one my personal preference but that's just not oh no I lost one the first one put it back on Mosfet's cables Dx's cables yeah those cables but it's just not off did what's the temperature in there I don't know if that can't decide that it's only 3.11 or 3.12 it's just changing really 19 C but I think it's quite warm for 19 C and it's not far from temperature power supply is not not making dodging all these and I know Rabbids is on about this for ages but I think this as well well we're taking this concentration that there is a definite difference if you take this bit of metal if on your flyback this is taken out of one but if on your one where it's connected like it is there take this bit off here take this off this bit of metal get rid of that ding off it comes nice and easy there's a little bit of glue down the edges get a little tiny screwdriver and just crack away at the glue nice and gentle we don't want to break this and then you can just get this out the glue might be up here as well either in oh shit I'm not even showing you the glue might be there it might be there and it might be there and and and just gentle little screwdriver get that off and runs a lot cooler runs just cold doesn't get hot with this there I think the coils around it makes it like an inducting heater makes us heating this up and everything starts getting too warm and it's not really good that's like room temperature you just leave that running leave that running no no no worries about burning out the flyback that's all where before it will constant check turn it off leave it off for a while I just don't like getting caught up there too much maybe I should make it a bit wider I could do that this would be easier for me because it's hotter it's the negative run notice that as well it's the negative side they get discoloured more so than the positive side this is the positive look the flyback coming out and this is the negative it's always this side that gets charcoaled up I wonder that's because the electrons are doing shifting from the negative jumping across the positive the positive jump across to the negative or is it just the negative go towards the positive on the negative it seems to get hotter that because I can tell one because it's a lot easier to bend yeah even this one just flicks back a bit not so much easier to bend that one a lot easier it stays there and it's bent back it doesn't the rest of the thing it's got a bit more I'll do that one I do that by it it's just to shift the air just to get it moving a bit I'd want to just sit in there doing that that's 50 watts so really I should expect this to be getting hot now yeah it's a little warmer in some spot but right in the middle it's warmer I just don't think that's as efficient I don't think that's as nice as when you see when it's like that about five ounce of preaching so quite like that just sleep last one yeah and I can have to use so much power doing it a little bit warmer on the front but nothing to worry about I wouldn't have it burn like that I don't see the point I like the idea of having a bit of an ornament 22 minutes I can't believe it I'm really sorry all right I'm going bye hey thanks for watching