 Γεια σας, είναι Vicky εδώ, κάνω 10 καρδιά από το σύμφωνα σύμφωνα Halloween card kit. Αυτή η καρδιά was sold out a few hours after it was released και ακόμα αν δεν έχετε αυτή η καρδιά, θα θα τα βρήξω σε όλα τα πρόταξη που were included. Αλλά πρώτα, ας δείξουμε έναν κομμάτι να δείξεις τι είναι μέσα στην καρδιά. Τώρα, έρχεται με τα πρόταξη, έχεις τρεις νουβο-κρυσταλδρόμπες στην καρδιά φυσικά και έχεις τα τρεις νουβο-κρυσταλδρόμπες με νουβο-κρυσταλδρόμπες που είναι πολύ καλύτερο για να δείξεις μικρή λαντερνότητα. Έχεις also get six paper bags, a mask by memory box. Θα χρησιμοποιήσω σε ένα από τα πρόταξη μου. Θα δείξεις το καρδιά's thumbset full of adorable images and it's all everything is Halloween themed. Θα δείξεις also get those adorable eyes which I am going to use again and again in my cards today. A doodle bag ribbon, a pack of sequins in Halloween colors. You also get a six by six double sided pattern paper and these are by Doodle Bag and you get 12 out of them. And also you get five different cardstock which as always I am going to cut in half and fold them so I will end up with 10 card bases. So let's get started with the first card. My first card is going to be super easy and super simple. I just had to use one of the pattern papers with that adorable image so I'm just going to cut it out in a rectangle. I have used my die cutting machine and then you can stick it directly on your card base at the center or you can do it just like me in an angle. This is going to give kind of a more interesting look. So I am going to stick it down with my glue and I am going to use my scissors to cut out the excess. This is a nice trick if you want to keep the card super simple but at the same time just add a little bit of interest. So I am going to use my glossy accents on the pumpkins, the ghosts and the windows. Just to embarrass it a little bit more. Since this is so simple I am going to add even one more element on my card which is going to be the ribbon. Now for the ribbon that was included in the kit I am going to use a brad on one side so I am just folding it. I am going to use a poke tool to make a hole so that I can add the brad easily through there and then I am going to measure how long of that ribbon I need cut it out with my scissors and I am going to use glue at the back and stick it at the very bottom of my panel. Trying to make sure that the ribbon is nice and straight down there and then I am going to use my scissors to cut out the excess. Now for the second card and probably the most favorite of all I made today is the one where I am creating a kind of a mummy look for the card so I have used this patent paper and I am cutting out strips I am trying to cut them out by having that white edge at least on one side of those strips I am going to do it throughout the whole 6x6 patent paper and once I have all those strips cut out I am going to stick them down on panels so I am just covering up this scrap piece of paper and I am going to stick everything down making sure that I cover it up with the strips all over once I cannot see the cardstock at all I can use my scissors to cut out the excess and I will repeat the same process to the other panel that you see on screen right now So now that I have both panels ready I am going to use some foam adhesive at the back and I am going to stick them directly on top of my card base For this card I am using the black card base and I am going to stick one at the bottom of the card base and one at the top So this way I have two raised panels for the gap in between them I am going to use the rest of the strips that I have left making sure that I don't cover up the whole gap So I leave one hole there where I am going to place the eyes later on I am using my scissors to cut out the excess Now I am using my fingers to distress the edges a little bit more Now in the gap I am going to use a set of eyes and insert them inside that hole I think this is a great Halloween card and it is super easy to reproduce Now I am going to add the sentiment that says BOO and I am going to stamp it on my scrap paper that I have from the previous card and I have used my pencil to draw a speech bubble If you have a die it is even better but I decided to draw it so that I can make it fit perfectly all around that BOO sentiment I am going to stick it on top of my card panel and that is ready Now this card gives me the idea to make the next one which is pretty much similar So I am working on this orange pattern paper I am going to stamp the sentiment with VersaMarking at the very bottom of my panel and then I am going to use my Nouveau embossing powder which is black but with glitter I think this is a great embossing powder to have because being an embossing powder it locks the glitter so it doesn't go anywhere So now I am going to use my heat gun to heat set everything and I hope you can see the shine there and now I am going to use my craft knife and create a few slits I don't measure anything but I make sure that some are bigger than the others and now I am going to distress them with my fingers making sure that I have holes on all the places where I have those slits This is a very easy card to recreate and I am also going to add some embellishments so I am stamping the butt and I have also stamped the spider coming from the top Now I am going to add some foam tape at the back for a raised effect and dimension and I am going to stick it down on the dark grey card base and in the holes I am going to add the eyes just like I did for the previous card Now even if you don't have this card kit I think that this video is going to give you great ideas on how to create 10 different Halloween cards but I am also going to make sure that I list to all the products that I am using today individually down below in the description area as well as on my blog So here is the card I think it is just adorable So simple and easy to replicate For the next card I am going to use this pattern paper with all those different panels and I am going to cut out one of them and I am also going to cut out the strip with the cantes from this pattern paper So with my craft knife and my ruler I am going to cut out a slit before the word candy and one after that I am making sure that it is wide enough so I can thread through that strip of candy that I have cut out I am going to use some foam tape at the back for some added dimension and I am going to stick it on this pattern paper with all those crazy lab designs So the crazy scientist on top of my panel Matt is perfectly the background paper I am going to cut out the excess paper and my panel is pretty much ready I am going to stick it directly on top of the white card base To finish it off I am using my Nuvo crystal drops at the background creating some dots by using my apple green color that was included in the kit For this card I am using one more panel that I have cut out from the same pattern paper where I have cut out the Matt scientist from the previous card So I am using my scissors to cut around the bottom and I am going to chop off the top So I have a nice banner for my card Now for this strip of paper I am going to use a few of those designs at the top of the banner just to extend it to make it more interesting looking and from this panel I am going to cut around that little ghost with the pumpkin and I am going to leave a black border all around as I am cutting it out Now I am using the purple patterned paper and the mask with my blending tool I am going over the mask to apply some black suit distress ink Nothing has to be perfect here I am just creating an abstract background for my card and once I am happy with the half of the panel I am going to move this stencil next to it and do the exact same thing and then I am going to use my blending tool to darken up the rest of the paper and mainly the edges Now to add more interest on the edges and to distress my card even more I am using this Nouveau mousse and that's a lilac lavender and I am going all around the edges This is going to give a nice touch and shine on the edges Now that my background is ready I am going to stick the banner at the top and I am going to add some foam adhesive at the back of my little ghost there and add him just behind the banner poking out So my card is pretty much finished I am just going to give some fun eyes to the little guy there and I am going to stick it directly on my card base for this card I am using the white card base and then to finish off the card I am going to use the purple crystal drop that was included in the kit which happens to have glitter inside it's not just shiny and I am going to add some dots here and there I am mainly focusing on the end of the branches So now let's move on to the 6th card I am going to use my circle die and I am trying to decide which size I want to and I am going for shaker card Now this is a scrap paper that I have from a card I made previously I am going to cut it out using my die cutting machine and on the back I am going to add tape adhesive, stick acetate and again I get a lot of questions about the acetate I use that's just packaging I keep packaging and recycle it So I am going to cut out a piece stick it at the back I am going to cut out the excess and I have a nice window for my card Now the next step is to use a foam adhesive to create a nice pocket so that I can insert my sequence and I use the sequence from the bag that was included in the kit I am peeling off the backing tape and then I am going to cover up the window with a piece of patent paper You can use either side the orange or the green and my window is ready which I am going to stick on top of the purple card base Now I am going to cut out this panel with the pumpkins and I am going to do again the same thing I am using my scissors to cut around the pumpkins leaving a black border and then I am going to use some foam tape at the back and stick them on the window So I am just assembling my card now sticking this down on my card base the pumpkins at the bottom of the window and for the sentiment I am going to use one of the sentiments that were included in this patent paper So I am just going to cut out a happy Halloween I created a fishtail at the end of that strip and I am just sticking it down with glue Now to finish it off I am going to add some glossy accents on the eyes of the pumpkins Now this is a really easy card I am working directly on my card base and I am stamping with VersaMarking the pumpkin the bat and the canty I am mainly focusing on the border of the card and I am going to add up the middle area So you can leave it as it is with that tone on tone look or you can add some embossing powder I am going for embossing and I will be using the Nouveau Black Glitter embossing powder that I have used in one of the previous cards So I am going to apply my embossing powder and then heat set it with my heat gun For the center of my card I have cut out this panel I am going to stick it at the center just by using some foam tape at the back Really quick and simple design Again I am going to use the same technique with my scissors I am going to cut around this image and I am going to create my own embellishment I have a white piece of cardstock and this scrap paper from a previous card with my scissors I am creating a slope there and this is going to be the ground for my little guys I am using foam tape at the back and stick it at the bottom of my white paper and on top I am going to place the little guys Now these little guys were screaming for the eyes so I just had to stick them on top which is going to make the card even more adorable Now for the sentiment I used alphabet stickers and these are alphabet stickers that I had for years I can't even remember when I got them and I just wrote down BOO Now for the bottom of my panel I just used this strip of paper to make it more interesting I am going to cut out the excess paper and I am going to stick it at the center of this orange card base For this card I am going to do some stamping so I am going to stamp this little girl and I am using memento toxido black ink I am also going to stamp the pumpkin and then I am going to use my Copic markers to do the coloring For this card I am going for a shaker card again and I have cut out a panel using my rectangle dies Now I am working directly on the card base and at the center I am going to stamp the sentiment So I am going to stamp it with VersaMark ink and I am also going to stamp the spider web that is included in the stamp set I am going to put it to look as if it is coming from behind the border so I am going to place the border on top of my card so that I can measure I am going to stamp it in one more place and then I can apply my embossing powder The embossing powder that I am using is by Nouveau and I am going to link you down below on the color, it is not totally white it is off white and I am going to use my heat gun and heat set everything I have prepared my window with acetate and the foam tape all around I am adding some of the sequins I am going to peel off the foam and then stick my card base directly on top So my window is ready and now I am going to embellish it a little bit more with the little girl using some foam tape at the back and now I am also going to stick the pumpkins just next to here and now for the last card I am going to use my punch and my circle dies to cut out images from the patent papers So I had that Frankenstein there I had the cut and the spider I cut out a panel from this colorful patent paper full of stars and I am going to use foam tape at the back of my little elements there and stick them on top For the sentiment I am going to use again this patent paper and cut out some of the strips there is a trick or treat and the other one that says October 31st I am going to use glue at the back and stick them directly at the bottom one over the other and to stick them down just because they are so thin I am using my new Nuvo glue pen and then I am going to use some tape adhesive at the back of the panel and stick it on top of the orange card base To finish it off I am going to add some glitter on the main elements by using my clear wing of styla glitter pen So let's take a quick look on all the 10 Halloween cards that I have created by using the Halloween card kit by Simon Says Stamp and let's take a quick look on all the leftovers Now this kit was a great touch builder since I now have 3 bottles of crystal drops I do have the stamp set the paper box, the tea lights I have only few scraps of paper but I still have the mask and the ribbon and a few more sequins So here are some close up photos of the cards that I made today I hope you had fun and got inspired and if you did don't forget to leave me a comment as well as give me thumbs up on my youtube channel and if you need more inspiration here are 2 more videos where I am creating 10 cards using the Simon Says Stamp card kits Thank you all for watching