 Hey guys, it's Kevin. Today, I'm going to show you how to take the cover off Epson Workforce Pro WF-6090. This thing is massive, so if something goes wrong, you'll probably get intimidated by opening it up. Let me show you how to open it. It's quite easy. Turn the printer to its back, and we're going to remove four screws. Lift the back paper guard. You're going to see two screws on top. Now the top cover can be easily taken off. I said easily. So you need to find three or three, five screws on top. And there are three of them in the front, quite easy to see. And there are two of them in the middle, right there. And just unscrew them. Now turn the printer to the front facing you. Use a screwdriver to pry from the left. And it's quite easy to slide this part off. You're going to find six screws on top, and take off those six screws. Make sure you count exactly number of screws. Epson's cases are very easy to take off unless you miss a screw. That's why they call it a screw. Now the front LCD can be taken off. Now you're going to find five screws. After those five, the front panel can be taken off. And two more screws on the right panel. And then take it off. Put this wire out of the socket and unwind it. That part is a mechanical sensor. That's since if the doors close or not. If you get the error that the front cover is not closed, you already solved the problem by going this far. So just go to bchtechnologies.com and looking for a mechanical. Cannot spell. Mechanical. Mechanical open closed-door sensor. And $199 will fix your problem. Now I'm going to take two screws off the front before we remove the cover. Start from that corner. And you always lift the thing up. Now forward. Lift it up. So when you lift it up, it's going to slide forward. Lift up, lift up, lift up. When you're about to reach the bottom and look under the bottom, you can see there's a little spot right there. You can put your screwdriver in. And that's going to come out. Another side. Let me show you. Push it in. See it come out. This is the most difficult part. Let me do it again. Just show you. And see if you get a hand of it, it's quite easy. Lift up. Lift up. You can look here and click. And just start working around it. And turn it upside. Turn it to the bottom. And push. And finally, those are two last screws. Now we're going to take this case off. And the key is in the back. Okay, let me turn it to the back. Start from the front. Work all the way here. And put your finger here to hold the position. Now pry it right here. And now every component is exposed inside. Now you can do your own thing. Changing the printhead, cleaning the printhead, whatever you want. Okay, if this is not nerdy enough for you, go visit www.bchtechnologies.com or locally, Greensboro, North Carolina. Cheers.