 Hey everyone, SheaBear1000 here today. We've got this ceiling fan. It's pretty cool. We're going to open this up We're going to take the old ceiling fan down out of mom's room And we're going to put this one up and we're going to check it out. It's remote control Should be pretty handy for her Okay, so let's get this opened up. Let's see what comes in the box This was sent to me from a company that sends me some things to try out And do quit videos on so but this one I'm going to do a video for them and a video for you guys So the color is white. It is a 19 inch fan. Okay, we have some hardware here and the instructions This looks like the remote control It's got a little Hoster that you can Hang on your wall We're on your nightstand beside you Let's open this up Let's get this out Look at that. That is nice Very nice. Awesome. Okay, so We're going to have to go take the other fan down So we can get this one hung up In its place Should be pretty self-explanatory But I'm going to show you how we're going to do this So let me get you set up in the bedroom take the other fan down And we'll get this one Starting on putting it up and hooking it up. Okay guys. So now I have The power turned off. I'm gonna take this off The globe monkey Had this fan installed before we got together and She says she never liked it so It is an LED fan. It's beautiful fan very expensive fan So we're gonna try the one that the company had sent me and Hopefully right this one was making some noise it stopped, but it would only do one speed And I'm thinking it just needed to Be oiled, but it started working again. So We're just going to go ahead and take it down because I'd have to take it down in any way to oil it So we're gonna put up a new one. I'm gonna feed I'm gonna speed you up through this process Well, I'll just go ahead and make a cut because you get the idea. I've got to take these fan blades off Take one off and then we'll get the idea Okay, there's one Now I'm gonna do that to the other four blades and now we're just taking off the light assembly here and There's the light assembly out now We have to take the top off and I've got to get a short screwdriver for that because the screws are hidden up on top and I'm gonna have to get see if I got one of the elbow Fill up screwdrivers because this is still too long to go up in there So it looks like there's there's three screws up there. So let me get see if I got an One that shape like an L. I don't have one, but I do have this bit And it's quarter inch wrench here that will work So again, this is gonna take a few minutes So I'm gonna kick you back on once I get the Last screw out turns out there was four of them up there. These I can tell you Or cross thread and well this there was three out of the four That were put in at an angle. I said I didn't put this fan up. So Now that screwed in Down through the top. So I'm not sure Never seen it set up quite like this before This is screwed on to this Down through here. All right, there we go. So let's go ahead Two just has to be loosened And two have to come clear out There's the two that have to come out. Now we're gonna loosen these two just a little bit. Yeah, that's a weird setup Now we're going to stop Okay There's usually they have a hook that you can hook these on and hang them While While you're working on these this one don't have that the new one does Okay, so we've got there's a ground got red Get white to white Black to black. So they did that right. There's that take the ground wire off All right Now we're on hook. We can set this down in a nice spot where I can trip over it and that's a straight This is a Phillips or straight. That Let me go get a Standard screwdriver and we're gonna take this off and then this will be already this will be down. So our new fan will be Mounted to the ceiling to the drywall itself. Okay, you get the idea. That's a That's a really long screw there There we go I'm gonna get a bag and put all these screws in so we're gonna start with hooking up our wires They're color-coded and Labeled this is your live wire. It's the black one. This is your neutral wire So it's got an N on it. That's your white wire and this is your ground So we're gonna start I'm gonna slide this over top of here Now I'm putting these little extension wires on because it'll be easier to hook up once we get it Up inside where we have to Where we have to be I'm gonna take this off and put this on here And I'm gonna bring it over to where the black is so we're gonna go Black to black white to white and ground to ground Now I'm gonna be using a blue wire for my ground Because I don't have a green wire this size But it doesn't matter as long as you get The colors the right way then this Our little protector will go up there like that. I'm gonna do that with the other two wires I'm gonna do that with the white wire and I'm gonna do that with the blue wire again Our blue wire is going to be the ground just like that Next I'm gonna utilize these two holes that already have from the other fan that I had removed and I'm gonna Before I tighten them up. This is just to hold this in place So I can mark my mount With my little pencil here Then I can run two anchors and two screws And that's going to be perfect for what we need to do now. I'm gonna make two holes Where my marks are here is one mark I'm just going to take a screwdriver and Push it right up through there. I'm gonna push my anchor up in there, and I'm just going to tap it in It's like that. I'm gonna do the same thing with this one over here on this side Just like I did that one Your application may be different. You may not have these two holes here They give you plenty they give you four anchors and four screws Which would be plenty to hold this light up now. We're gonna start putting our screws up in here now This cable that's hanging down is to clip Onto there and that'll hold that for you while you can get your Your wires hooked up now what I'm going to do Black is going to go to black White's going to go to white and like I said, our blue is our ground. It's going to go to ground and we're going to do that Just by putting a couple wire nuts on and we'll do that with the other two and Then we're going to put this up into place now We have three screws to put in there's three holes here one goes there one goes there and one goes there They are supplied with the unit now put the other two in One over here one over here. We'll wipe it down and try it out. Oh done time to check it out Okay, now it's time to check this out first. Let's turn the light on it has a handy-dandy remote control So we're going to use the remote control. We're going to turn the light on There is three different light settings It's got white light yellow light and natural light. There's the white light There's the yellow light and There's the natural and you can also Brighten them We're dim them. There's dim all the way up to bright. This is very user-friendly remote control It also has a one hour and two hour Timer on this remote. So we're going to start with the fan. We're going to go to low very quiet No vibrations We're gonna go to medium now. We're going to go to high and there is a stop button on your remote control That'll stop it and then you can turn off the light Like that or you can use a switch This is perfect for a child's room or an elderly person's room, which that is what this Incidentally this fan is in It's in my mother-in-law's room seems to be of a good quality It was easy to set up. You don't have to pair the remote control. It's all ready to go It's plug-and-play you hook it up put batteries in your remote and it's ready to go. Okay guys So there you go. That was um Really easy to set up and it actually covered the hole from the other fan Now if you noticed there was a red wire hooked up. That's because someone when they put all these fans in they put two switches one for light and One for the fan This one you don't need that. You only need the one switch. So don't be alarmed if you have two switches You're not going to use that red wire put a wire nut on it Just use your black white and your green in my case I used the blue wire for my green wire, which is your ground So you have your live your neutral and your ground. That's only three wires. You have to worry about so Yeah, it's um Very nice. I'm I'm telling you what I'm impressed with that fan and the fan is also Reversible We'll let it stop here on the remote control. There's a red button up on top While that is running you hit the red button You'll hear that beep it will slow down automatically stop automatically and then Reverse itself in the other direction and there it goes Very neat Beautiful piece. So guys there you go. There will be a link in the description down below In case you're interested in one of these. I'm really impressed With how much error that is moving Opposed to that big giant fan that was up there and this thing looks really nice. It's gorgeous So though I'll put a link in the description below So if you have any questions, please comment and I'll answer them the best of my ability. There is an instruction here Instructions very simple guys if you've ever hung a ceiling fan up before any DDI wire can do this theirself so Yeah, I'm very impressed. I love all the functions And I like that it's remote control for her mom. So Now depending on whether should you have it blowing down in the summer and things like that To me what makes sense is in The summertime like the big fans. I usually have it sucking the hot air up keep the hot air up here We all know hot heat rises So that's what I do. I turn them on backwards. So that way the cold air stays down here the fan sucks the hot air up and In the winter I have it blowing down Because again the heat heat rises it blows the heat back down on you Again, it could be just a matter of preference whatever you want to do, but that's the way I usually do them A lot of people think you should have it blowing on you But I'm really hot days Let's say you don't have air conditioner in a room or something like that And if you have that blowing down on you you can actually feel it blowing hot air on you And if you turn it around to where it runs backwards, it sucks that hot air up It actually makes you cool down more because it's sucking hot air up past you That's just the way I've always done it it makes sense to me, but you can do it however you want to do it Especially with this thing. So thanks for watching guys appreciate it She better the myth the man alleged I'm gone for now. We'll see you guys in the next one. Bye. Bye and take care