Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Published on Jun 21, 2008
www.desislava20granulators.com The advantages of our granulators are: Very strong design of the cutting chamber and the rotor (also and the frame), the machine is coated with Zinc before the painting, relatively simple design - this will help of the workers to serve the machine, the granulators has different design of the cutting chamber, of the rotor and the in accordance with the different waste which will be processed into the machine, the SKF bearings are calculated about + 15 % this is one of the the warrantyes for the quality of the work of the granulator, the knives are from X153CrMoV12 = D2 = 1.2379 steel (this is the most popular knives steel suitable for processing of plastic and rubber waste), the rubber belts for the drive are made in Germany, the motors are made in Italy or Germany, the heavy-duty machines are equipped with Hydraulic unit suitable for the opening of the screen cradle, the Preventive Clutch between the shaft and the pulley for the rubber belts from the motor drive will be very useful if into the cutting chamber fail big piece which can to block the rotor - this unit will rescue the granulator from big damages, all knives (bed and fly) are adjustable, Hydraulic unit for removing of the hopper - Full protection at operation - Total stop before various accesses to the machine - Full automated control - Easy change of the screen - A jig where the rotor knives can be pre-set outside of the machine so that you can change them quickly without adjusting them in the machine - from 4 kW up to 160 kW / 1'500 rpm or 1'750 rpm / 3 phases / (60 Hz or 50 Hz) 480/460/440/400 V / IP54 or IP55 / Thermal Protection - The motor controls (Star-Delta) are manufactured with units from "Square D" - the US or "Telemechanique"- France. We can supply the machine and with Soft-Start for the motor. The cost exw also is important item, but not on first place of course. You will pay deposit only 30 % and the final payment 70 % will be when the machine is ready for the shipment. If you are interested, we can send you detailed photos and short movie of your machine (when the machine is ready) and after that you will send us the rest 70 %.
The different design of the rotors - in line, staggered or chevron, open or solid ... with shear cutting allows the machines to process all kinds of plastic and rubber: drums, containers, pipes, tires, jars, P.E.T. scrap - bottles and pre-forms, pails, plastic chairs and tables, plastic plant pots and plant pot holders, rubber pieces 100% steel free, ABS, PE, PVC, LDPE, HDPE, PP, Polystyrene, plastic trays and crates, thermoplastics with glass fillers, plastic bins, plastic bags, plastic pallets, rubber mats, waste from plastic and rubber industry, rubber bales, all kind of plastic films and foils and agricultural films ... etc.