 In today's demonstration of the IIS-2-ICLX inclinometer we are going to use its embedded machine learning core for tilt angle calculation. We prepared a rate table that will be used to set the inclination angle. There are two devices attached to the rate table. First one is a reference inclinometer with an accuracy of more than 0.04 degrees and the second one is our digital inclinometer IIS-2-ICLX. We are using a machine learning core application example for the IIS-2-ICLX which is available on our GitHub. The machine learning core outputs a number in two's complement format that corresponds to the angle of inclination of the sensor. The converted output of the machine learning core is displayed on the left in the Unicode UI. The reference inclinometer shows the measured value on its display. Please note that this example uses a calibrated sensor data so it represents the accuracy with the IIS-2-ICLX that you can reach without any calibration. The rate table is now tilting the inclinometers by 20 degrees on both sides in steps of 5 degrees.