 Hello boys and girls Decided to do another repair video. I got this 2012 Nissan Rogue Nissan Rogue And let me show you what I'm doing. So this is what I got going on over here. What happens? This is the second time the handle It simply feels like it's locked like the door is locked and it's just you know, there's nothing going on And you know, even if you unlock the door, it doesn't open the door at all and it's kind of loose the handle is nothing's broken But the handle is a tiny bit loose inside the door on the outside Anyways, so I took it apart Taking it apart. It's fairly easy. I will explain what to do to take it apart So once you get this handle out, this is kind of difficult to get it out what I've noticed This little ball was out. Let me show you simply pop this out This was slightly bent I bent it back and It was basically like this more or less Like that. So what happens the handle goes right in here And it simply pulls When you pull the handle, this is what happens and you can see the ball is not in there So it's not catching it's not it's not pulling the cable So that's the that this is what it was going on right now This is actually a second time I'm doing this it lasted for Maybe a few months three months or so four months. Maybe you can't really remember So there's a problem. I mean watch. What am I supposed to replace? You know, it seems like it's a factory Fault this also should be a recall But all you got to do is take this cable out pop it in there Put it put it back in and that's it Now it's working right because it's catching the cable, but I don't want it to pop out again So what I'm thinking I'm gonna do Just to prevent it I started cutting this out what I'm gonna do I'm gonna cut this out make it here. Let's just do it So the plan basically is I have lost my plan Here found it got this old clip now what I'm thinking to keep it from popping out Just block it somehow right at first. I was thinking drill a tiny hole here and drive a screw or a small bolt So it sticks out Right inside But then I thought okay, why make it so difficult If I can just do this, so I think I actually got a better one. It's a bit thicker So something like this basically, okay, so pop it in No, it's not gonna work This one's too long. This might not be enough. Okay little update This is what I did the clip didn't work because it was sticking out too much and it was rubbing on the inside of this area as you can see the shape of This is this is the same shape of that so these two Gotta be flush With each other. I'm gonna do my best to show you how to put it back in okay Bending the ball though the wire the cable back Should also help. This is sticking out a little bit But I'm gonna try it anyways Looks like it's okay It's not rubbing on the screw so there must be some space between the two now this guy This is the lag that goes through from the outside inside and this part needs to Go into that yellow clip that you probably see there. I don't know. Yeah, you do. Okay Before I pop that in I'm gonna try the handle. Okay, so the handle goes in first Okay, the handle is in it actually It feels good. It feels like it's gonna work It's pulling on the cable is what it is what I mean Now back to the lock That's actually much easier now. This is really in the way But this is also the most difficult part to install So I'm not about to take it apart anymore So now it's just a matter of popping in that Yellow clip there. I know you can't see it, but there's not no other way First you pop it into the hole into the handle Like so, okay, and then you simply Twist it towards the rod and push it in so it should look like that That's actually attached to the latch now what you got to do is Take care of this Torx bolt. That's a T30 So now as of now the handle is actually officially in it's only held by one bolt But it's still loose For some reason Let's see what's on the other side. So this one is not loose Okay, is there some kind of padding on the inside here It looks like there is Okay, so this is this was missing I actually Did not encounter the the padding or the plastic And the first time I took it apart months ago So that's why this is loose So what do I do at this point? so because this is missing this was Taken out before me. I just realized this is quite a bit But I don't think that's causing the the ball to pop out because it was taken out You know the ball had to pop out While though that padding was still in there. So I doubt that that's actually causing For that ball to pop out So what can I do over here? Just maybe shove something between the door inside of the door and The plastic there That's probably what I'm gonna end up doing. Okay Cardboard there cardboard cardboard On the bottom there, you can see it check this out. It's much better nothing here It's actually About the same as on the other side. Yes It's actually a bit better almost the same Yeah, so I would say it's a little bit better than on this side Yeah, and you send start using cardboard now I know I do realize that this is a you know a head job or whatever you want to call it You know, what do you fix in this case? You know, I'm gonna call the dealer, you know Your regular stores your auto parts stores are gonna have these kind of parts Cheap for cheaper than the dealer. So, you know dealer is gonna sell you the whole part or the whole assembly for who knows For how much money, you know, I'm sure it's expensive And considering this is a high mileage car. Hopefully it will outlast the car So hate all you want. I Don't care if this was your car. You'd be doing the same thing instead of spending hundreds at the dealer All right, let's continue. Let me show you how to put it back all together and it's not gonna be easy Okay, hopefully you can see what I see. So now since the handle is back and That screw is back in here So the handle is done. Now this needs to go back and and These There's four of these right here on these The window rails and that's the most difficult part you gotta line up the window Because as you can see I can I'm gonna move the glass and the rails move with it so you need to line that up all four and Drive screws in it. So let's remove this The switch assembly We'll need it any longer for now. I have an idea. I'm gonna use this tape. Keep the window closed All right, hopefully this will hold There are nowhere near where they're supposed to go. Let's pop these open See and I have access to the rails, but they're not moving. So What's going on here? I'm gonna pull the glass all the way up Make sure it stays all the way up. If the glass is attached to the door And I'm gonna go up and down Technically the rails should go up and down, right? Well in my in my head. Let's see what happens There we go got one actually, I Can see these tools. So I'm gonna secure this this cover So doesn't move on me With four bolts for now this Access hole, it's too far. They should have made it here somewhere Next to the rail nuts. Okay, I got the bottom one. This is the problem right now. It's just not lining up It's just not easy Okay, and now to the now lower the window more back to the cover. Okay. These are still those I'm just gonna see if I need to do make making adjustments. Okay. I'm gonna hold it to the left and up a little bit kind of Meet the movement in the middle, but push it to the left. I believe we're good And now these this cable this harness just pops in here That's it. I'm gonna take this one out He's whenever these white clips stay on the door. You got to take them out and put them back on the panel So I actually have three that came out on me So yeah, just slide them back in now these Go to the handle on the inside This goes to the top all the switch harness through the hole Starting from the top kind of hang the top on top make sure the clips line up. Let's take a peek on the inside and That's it If I put it all back together, I'm just gonna test it Pop the window open first Unlock the door check the inside see if it locks unlock So this just pops in the front of it Drive it in push the back in. There's a 10 mil right here and two more 10 mils inside the handle All right, so that is it Subscribe, like, comment, check out my Subaru STI EJ25 build videos I'm gonna be tracking that thing. It's come springtime, summertime. Hopefully. All right See you soon