Voice Coil Positioning Stage - VCS05-060-CR-001





Rating is available when the video has been rented.
This feature is not available right now. Please try again later.
Uploaded on Sep 23, 2008

Voice Coil Positioning Stage

P/N: VCS05-060-CR-001

The VCS05-060-CR-001 voice coil positioning stage uses H2W voice coil motor NCC05-18-060-2X to generate a continuous/peak force of 6.0 lbs [26.7 N]/18.0 lbs [80.1 N] with a total stroke length of 0.50 in [12.7mm]. The 0.1-micron resolution encoder allows for very precise positioning. It comes supplied with a high accuracy crossed roller bearing. The magnet housing is the moving part of the assembly so that there are no moving (flexing) cables in the system.

- Voice Coil Motor P/N: NCC05-18-060-2X
- Cross Roller Slide

- Stroke = 0.50 inch
- Continuous Force = 6.0 lbs @ 100 % Duty Cycle
- Peak Force = 18.0 lbs @ 10% Duty Cycle
- Optical Linear Encoder = 0.1 micron resolution .

For additional information please contact H2W Technologies, 26380 Ferry Court, Santa Clarita, CA 91350; Tel: (661) 291-1620, Fax: (661) 291-1626, E-Mail: info@h2wtech.com or visit the website at www.h2wtech.com.


When autoplay is enabled, a suggested video will automatically play next.

Up next

to add this to Watch Later

Add to

Loading playlists...