 I'm going to show you four different 3d printed functional tools and one test dog all done on the lot max Loat max lot max on the lot max Loat max lot max lot max lot max Whatever this word is SC 10 my name is Jim and this is the edge of tech What's up everybody today? We're gonna take a look at the lot max or loat max SC 10 However, you say it. It's a pretty cool little printer But most of all I'm gonna show you four different 3d printed tools that are very functional And that can be done on this printer right out of the box and also don't forget about the test dog So the test dog was done on the 235 by 235 by 280 bed of the SC 10 Actually the sticker on the bed says 250 by 250 by 280 So that's the number I'm actually gonna stick with for the rest of the video 250 by 250 by 280 And the test dog was on the SD card So I popped the SD card in and I hit print right after I leveled it and this is what came out It's a really good print It came out super good with the test white filament that came in the box It's shiny the layers are hard to see which is awesome and in general it just came out very good When it was printing it was actually super quiet because this printer is really a quiet printer I think the fans are the loudest thing on it and they're really not that bad If you actually compare them to that JG maker artist D that I did this thing is silent compared to that That thing sound like a jet engine, but it turned out awesome It looks great and for a test print on a brand-new printer. This is exactly what I want to see So let's get on to the tools the first tool will call it number one is this adjustable wrench I printed this off in the test white filament that came in the box using a Prusa slicer profile that I created I'm tweaking as I go in the description below You'll find a link for everything I printed today along with that profile if you want to check out Prusa slicer for the SC10 But the first tool like I said number one. We're gonna call it the adjustable wrench I printed this out I pulled off the support material that came on that was built into the model which was really cool and this thing Works right off the bed. It actually opens and it closes and as you can see the layers are great It the print came out really good for my first test on that Prusa slicer profile And it actually opens and closes with no problem And this is the first functional print in this video because you can actually use this on nuts and bolts It is super cool. You can print it off It didn't take that long and I suggest everybody dives in and test this on their printers Tool number two on my list was a set of these Allen wrench T handles These take the set of Allen wrenches that come with the machine and make them So you can actually use them with T handles just like this as you can see there's different sizes And if you print all five you can actually do T handles on all of the Allen wrenches that came in this set All I did was I jumped on the built-in three and a half inch touchscreen. I went over to print I found my file I hit print and confirmed and these things came straight off the bed now I did print this batch the handles and the little screw-in part all at the same time It was a really cool print it came out great And I suggest that everybody gets a set of these because it really makes your Allen wrenches much more easy to use So all you do is you take your Allen wrench you find the little threaded part That is actually the size of your Allen wrench. So it'll go on like this You'll actually take your Allen wrench you put it inside of the handle and then you just use this to thread it down and tighten it in Once it's tightened in you have yourself a T handle on your Allen wrench and you're good to go to work on your printers It's actually really strong and you can make it as strong as you want with the amount of walls and infill you use But this is a must-have for the 3d printing enthusiast especially because it's our number two functional tool The third functional tool that I printed on this whisper quiet lot max low max lot max I think we went over this SC 10 are these filament clips right here. They actually print on the side I printed six of them at one go and it only took about an hour It clips onto the side of your filament spool and then your filament will clip right into it holding the filament in place And you can actually put it anywhere on that spool You don't have to find the holes and and have extra or not enough filament and go back to the extra hole But it's really cool Like I said, they just clip on to the spool like that and then your filament clips right into them And the functionality of these little clips on your spools is what makes this my number three functional print of this video Now my fourth and final functional print on this video is a super cool one I found this on Thingiverse just like the rest of these again links are in the description below But this might be one of the most functional prints that I've printed to date This right here is actually a square edge holder So what you would do is you would take two pieces of wood in my case I only have two hands so I can't show you that but I have this black tile You would place this you would place your two pieces of wood like a frame just like that And then you would clamp it down and when you clamp this down This gives you a perfect 90 degree angle so your frames can actually be perfectly straight And you can measure them to make sure they're dialed in and aligned The cool thing about this is is it comes in three different sizes So you can use this one which is the smallest one all the way up to a really good size one So if you want to use two by fours or two by sixes that kind of thing and as you can see here I actually printed the size that's too small for two two by fours But you get the idea the wood goes together and this holds it in a nice square manner This could come in handy when building desks or picture frames or anything you want to build that you need square edges I really like this print. This is super functional and one of my favorites on this list And that makes this my number four functional print on this video I just like to thank the company for sending this printer out to me in full disclosure They did send this for a review. I don't do a ton of review videos So I thought I would do a series of videos on really cool things to print on brand new printers that are in my shop There's just a couple more things to talk about on this printer before I go There is an optional Wi-Fi module. It does not come with it But that could be really cool if you wanted to hook up and actually run this directly from Wi-Fi Again, it has a three and a half inch touchscreen the 250 by 250 by 280 bed Which is a little bit bigger than the Ender 3 series, but certainly a great bed size It does have a removable flexible bed so you can pop it off and pop your prints off again It's very quiet printer I did a bunch of testing on this printer and I came down to just filming the four tools that I showed and the dog Don't forget about the dog the dog came out really good And all of that was actually printed on the sample spool that is still on here If you want to check out the sc10 there's a link in the description below again a very nice printer It prints really well It does have a filament run-out sensor as well, which is a nice feature, but I really do like this machine It's actually served me pretty well for all the testing. I've done with it And I think it would be a really good first printer if someone out there is looking to spend a little more money than an Ender series But want a little different features like the touchscreen and the filament run-out sensor, etc I hope you guys got some really good ideas for some really cool tools that you can print Every day using a 3d printer Remember your imagination is everything you can print anything you want from hammers to Allen wrench holders to wrenches Just jump on any of the sights thing averse my mini factory gam body Any of those look up the model you want and you can be printing in no time Well, I hope you learned something today and as always keep printing Well, I hope you liked the video today with the four 3d printable tools that are actually functional If you did give me that thumbs up hit that subscribe button right here and click the little bell if you want to get notified Anytime we go live on Monday for hot makes or anytime I put a new video out. Did you see this one? That's a good one We'll see you in the next one